Постоянно глючит роутер!Извенит

Post new topic   Reply to topic    DD-WRT Forum Index -> Использование и установка DD-WRT
Author Message
Qwazar
DD-WRT Novice


Joined: 06 Jun 2015
Posts: 11

PostPosted: Sun Jan 03, 2016 10:29    Post subject: Постоянно глючит роутер!Извенит Reply with quote
Всем привет! У меня роутер TPLINK TLWR-941ND.
Моддераторы! Извените если я не там разместил тему! Я на вашем форуме 1 раз!
<4>[ 0.000000] flash_size passed from bootloader = 1615
<6>[ 0.000000] bootconsole [early0] enabled
<6>[ 0.000000] booting platform Atheros AR9132 rev 2 (0xb9)
<6>[ 0.000000] Determined physical RAM map:
<6>[ 0.000000] memory: 02000000 @ 00000000 (usable)
<4>[ 0.000000] Zone ranges:
<4>[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
<4>[ 0.000000] Movable zone start for each node
<4>[ 0.000000] Early memory node ranges
<4>[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
<7>[ 0.000000] On node 0 totalpages: 8192
<7>[ 0.000000] free_area_init_node: node 0, pgdat 80277a70, node_mem_map 81000000
<7>[ 0.000000] Normal zone: 64 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
<4>[ 0.000000] Primary instruction cache 64kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
<4>[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
<5>[ 0.000000] Linux version 3.5.7 (root@dd-wrt) (gcc version 4.7.3 20121205 (prerelease) (Linaro GCC 4.7-2012.12) ) #6147 Mon Mar 25 08:49:28 CET 2013
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
<5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
<6>[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<5>[ 0.000000] __ex_table already sorted, skipping sort
<6>[ 0.000000] Writing ErrCtl register=00000000
<6>[ 0.000000] Readback ErrCtl register=00000000
<6>[ 0.000000] Memory: 29492k/32768k available (2131k kernel code, 3276k reserved, 389k data, 156k init, 0k highmem)
<6>[ 0.000000] NR_IRQS:80
<0>[ 0.000000] irq init done
<4>[ 0.000000] plat_time_init: plat time init done
<6>[ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
<6>[ 0.080000] pid_max: default: 32768 minimum: 301
<6>[ 0.080000] Mount-cache hash table entries: 512
<6>[ 0.090000] NET: Registered protocol family 16
<6>[ 0.110000] bio: create slab at 0
<6>[ 0.120000] Switching to clocksource MIPS
<6>[ 0.130000] NET: Registered protocol family 2
<6>[ 0.130000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.130000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
<6>[ 0.140000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.140000] TCP: Hash tables configured (established 1024 bind 1024)
<6>[ 0.150000] TCP: reno registered
<6>[ 0.150000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.160000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.160000] NET: Registered protocol family 1
<5>[ 0.170000] gpio_proc: module loaded and /proc/gpio/ created
<6>[ 0.180000] Register LED Device
<5>[ 0.180000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
<4>[ 0.190000] AR7100 GPIOC major 0
<6>[ 0.190000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
<6>[ 0.200000] msgmni has been set to 57
<6>[ 0.200000] io scheduler noop registered
<6>[ 0.200000] io scheduler deadline registered (default)
<6>[ 0.210000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[ 0.240000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 19) is a 16550A
<6>[ 0.240000] console [ttyS0] enabled, bootconsole disabled
<0>[ 0.260000] guessed flashsize = 4M
<0>[ 0.260000] scanning for root partition
<0>[ 0.260000] tplink uboot detected
<0>[ 0.270000] bootloader size = 20000
<0>[ 0.280000]
<0>[ 0.280000] found squashfs at 110000
<5>[ 0.280000] Creating 8 MTD partitions on "ar7100-nor0":
<5>[ 0.290000] 0x000000000000-0x000000020000 : "RedBoot"
<5>[ 0.290000] 0x000000020000-0x0000003e0000 : "linux"
<5>[ 0.300000] 0x000000110000-0x0000003e0000 : "rootfs"
<5>[ 0.310000] mtd: partition "rootfs" set to be root filesystem
<5>[ 0.310000] 0x0000003e0000-0x000000400000 : "ddwrt"
<5>[ 0.320000] 0x0000003e0000-0x0000003f0000 : "nvram"
<5>[ 0.330000] 0x0000003f0000-0x000000400000 : "FIS directory"
<5>[ 0.330000] 0x0000003f0000-0x000000400000 : "board_config"
<5>[ 0.340000] 0x000000000000-0x000000400000 : "fullflash"
<4>[ 0.350000] ->Oops: flash id 0x1c3016 .
<6>[ 0.350000] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.360000] tun: (C) 1999-2004 Max Krasnyansky
<6>[ 0.360000] PPP generic driver version 2.4.2
<6>[ 0.370000] PPP BSD Compression module registered
<6>[ 0.370000] PPP Deflate Compression module registered
<6>[ 0.380000] PPP MPPE Compression module registered
<6>[ 0.380000] NET: Registered protocol family 24
<7>[ 0.390000] Registered led device: generic_0
<7>[ 0.390000] Registered led device: generic_1
<7>[ 0.390000] Registered led device: generic_2
<7>[ 0.390000] Registered led device: generic_3
<7>[ 0.390000] Registered led device: generic_4
<7>[ 0.390000] Registered led device: generic_5
<7>[ 0.390000] Registered led device: generic_6
<7>[ 0.390000] Registered led device: generic_7
<7>[ 0.390000] Registered led device: generic_8
<7>[ 0.390000] Registered led device: generic_9
<7>[ 0.390000] Registered led device: generic_10
<7>[ 0.390000] Registered led device: generic_11
<7>[ 0.390000] Registered led device: generic_12
<7>[ 0.390000] Registered led device: generic_13
<7>[ 0.390000] Registered led device: generic_14
<7>[ 0.390000] Registered led device: generic_15
<7>[ 0.390000] Registered led device: generic_16
<7>[ 0.390000] Registered led device: generic_17
<7>[ 0.390000] Registered led device: generic_18
<7>[ 0.390000] Registered led device: generic_19
<7>[ 0.390000] Registered led device: generic_20
<7>[ 0.390000] Registered led device: generic_21
<7>[ 0.390000] Registered led device: generic_22
<7>[ 0.390000] Registered led device: generic_23
<7>[ 0.390000] Registered led device: generic_24
<7>[ 0.390000] Registered led device: generic_25
<7>[ 0.400000] Registered led device: generic_26
<7>[ 0.400000] Registered led device: generic_27
<7>[ 0.400000] Registered led device: generic_28
<7>[ 0.400000] Registered led device: generic_29
<7>[ 0.400000] Registered led device: generic_30
<7>[ 0.400000] Registered led device: generic_31
<6>[ 0.400000] u32 classifier
<6>[ 0.400000] Performance counters on
<6>[ 0.400000] input device check on
<6>[ 0.410000] Actions configured
<6>[ 0.410000] Netfilter messages via NETLINK v0.30.
<6>[ 0.420000] nf_conntrack version 0.5.0 (460 buckets, 1840 max)
<4>[ 0.420000] nf_conntrack_rtsp v0.6.21 loading
<4>[ 0.430000] nf_nat_rtsp v0.6.21 loading
<6>[ 0.430000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.440000] IPP2P v0.8.2 loading
<6>[ 0.440000] TCP: westwood registered
<6>[ 0.440000] TCP: hybla registered
<6>[ 0.450000] TCP: vegas registered
<6>[ 0.450000] NET: Registered protocol family 17
<5>[ 0.450000] Bridge firewalling registered
<6>[ 0.460000] 8021q: 802.1Q VLAN Support v1.8
<6>[ 0.460000] searching for nvram
<6>[ 0.470000] nvram size = 0
<6>[ 0.520000] Atheros AR71xx hardware watchdog driver version 0.1.0
<6>[ 0.530000] ar71xx-wdt: timeout=15 secs (max=42) ref freq=100000000
<6>[ 0.540000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
<6>[ 0.550000] Freeing unused kernel memory: 156k freed
<7>[ 3.440000] ar71xx-wdt: enabling watchdog timer
<4>[ 3.530000] ag7100_mod: module license 'unspecified' taints kernel.
<4>[ 3.540000] Disabling lock debugging due to kernel taint
<6>[ 3.580000] ag7100_mii: probed
<4>[ 3.580000] eth0: Marvell 88E6060 PHY driver attached.
<4>[ 3.860000] Writing 4
<6>[ 4.050000] Compat-drivers backport release: compat-drivers-2013-01-21-1
<6>[ 4.050000] Backport based on wireless-testing.git master-2013-02-22
<6>[ 4.060000] compat.git: wireless-testing.git
<6>[ 4.260000] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 4.270000] cfg80211: World regulatory domain updated:
<6>[ 4.270000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 4.280000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 4.290000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 4.300000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 4.310000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 4.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<7>[ 5.060000] ath: EEPROM regdomain: 0x0
<7>[ 5.060000] ath: EEPROM indicates default country code should be used
<7>[ 5.060000] ath: doing EEPROM country->regdmn map search
<7>[ 5.060000] ath: country maps to regdmn code: 0x3a
<7>[ 5.060000] ath: Country alpha2 being used: US
<7>[ 5.060000] ath: Regpair used: 0x3a
<7>[ 5.090000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<6>[ 5.090000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
<6>[ 5.100000] cfg80211: Calling CRDA for country: US
<6>[ 5.110000] cfg80211: Regulatory domain changed to country: US
<6>[ 5.110000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 5.120000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[ 5.130000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[ 5.140000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 5.150000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 5.150000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 5.160000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[ 5.170000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
<6>[ 6.970000] device eth0 left promiscuous mode
<6>[ 6.990000] device eth0 entered promiscuous mode
<6>[ 7.010000] device eth0 left promiscuous mode
<6>[ 7.020000] device eth0 entered promiscuous mode
<6>[ 7.030000] device vlan0 entered promiscuous mode
<6>[ 7.040000] br0: port 1(vlan0) entered forwarding state
<6>[ 7.040000] br0: port 1(vlan0) entered forwarding state
<6>[ 7.110000] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 7.120000] cfg80211: World regulatory domain updated:
<6>[ 7.120000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 7.130000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 7.140000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 7.150000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 7.150000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 7.160000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 7.200000] cfg80211: Calling CRDA for country: US
<6>[ 7.200000] cfg80211: Regulatory domain changed to country: US
<6>[ 7.210000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 7.220000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[ 7.220000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[ 7.230000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 7.240000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 7.250000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 7.250000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[ 7.260000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
<6>[ 8.140000] device ath0 entered promiscuous mode
<6>[ 9.040000] br0: port 1(vlan0) entered forwarding state
<6>[ 9.320000] br0: port 2(ath0) entered forwarding state
<6>[ 9.330000] br0: port 2(ath0) entered forwarding state
<6>[ 10.440000] device vlan1 entered promiscuous mode
<6>[ 10.470000] device vlan1 left promiscuous mode
<6>[ 11.330000] br0: port 2(ath0) entered forwarding state
<6>[ 12.020000] etherip: Ethernet over IPv4 tunneling driver
<6>[ 41.740000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.



Данный лог можно назвать нормальным? У меня частенько пропадает интернет и пишет ван 0.0.0.0
Sponsor
vasek00
DD-WRT Guru


Joined: 06 Nov 2010
Posts: 3312

PostPosted: Thu Jan 07, 2016 8:08    Post subject: Re: Постоянно глючит роутер!Извен Reply with quote
Qwazar wrote:

...
<5>[ 0.000000] Linux version 3.5.7 (root@dd-wrt) (gcc version 4.7.3 20121205 (prerelease) (Linaro GCC 4.7-2012.12) ) #6147 Mon Mar 25 08:49:28 CET 2013
...
Данный лог можно назвать нормальным? У меня частенько пропадает интернет и пишет ван 0.0.0.0

Сейчас 2016г.
Смотрим http://www.dd-wrt.com/phpBB2/viewtopic.php?t=260526
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Использование и установка DD-WRT All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum