Hallo
42914 works on my DIR-825B2s properly;
42925 briked one of them (didn't upgrade the others based of that experiance), Wildlion says he has no problems with this FW on DIR-825;
42954 didn't test yet on this device.
ervau
@gargiuseppe
42954 works as well w/o any problems.
@gargiuseppe, @Wildlion
"briked" DIR-825 runs again via Recovery Mode and Win-IExlorer. Took a long time until the DIR responded after choosing the ...factory-to-ddwrt..bin and started to count %. Upgrading from factory.bin to DIR825-firmware.bin worked via FireFox (my std-browser). Anyway everything is fine again.
THX and have a nice weekend.
ervau
Posted: Fri Apr 24, 2020 16:31 Post subject: D-Link 825-B1
Hello all,
I thought I would chime in. I am currently running the latest on my 825 B1. It seems to work fine. I only use it as a WDS station (no VAP needed). The VAP issue is fixed now though.
Upgrade to the latest via the link in my signature. Make sure to reset to defaults if you are coming from a building older then ~6 months. Do NOT restore from a backup file from one version to another. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x3 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - NU
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - NU
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - NU
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
@gargiuseppe
42954 works as well w/o any problems.
@gargiuseppe, @Wildlion
"briked" DIR-825 runs again via Recovery Mode and Win-IExlorer. Took a long time until the DIR responded after choosing the ...factory-to-ddwrt..bin and started to count %. Upgrading from factory.bin to DIR825-firmware.bin worked via FireFox (my std-browser). Anyway everything is fine again.
THX and have a nice weekend.
ervau
First off those are warnings and not errors. Secondly they are from the firewall logging. I do not see anything wrong with them, it just looks like it is the firewall saying that it is accepting a connection on port 80 http.
Syslog last I knew was not working well. As for resetting the router after upgrading to the latest, I am going to stay away from that, because there are many arguments over doing that or not.