Do you use dhcp forwarder on the setup page? That's what happened to me on the last release. It was fixed by turning it back to just dhcp but disabled. Just curious.
Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Tue Dec 01, 2015 17:06 Post subject:
Argorr wrote:
Do you use dhcp forwarder on the setup page? That's what happened to me on the last release. It was fixed by turning it back to just dhcp but disabled. Just curious.
Actually....Yes...I do have it set as a DHCP Forwarder....I'll try a different setup on this unit and report back.
Thanx for the info.
redhawk _________________ The only stupid question....is the unasked one.
Router Model: TP TL-WDR4300 v1
Update from r28211 to r28397
Status: OK
Reset: No
Errors: No
Router Model: TP TL-WR1043ND
Update from r28374 to r28397
Status: OK
Reset: No
Errors: https doesn't work for me.
(Port 443 is open but Chrome reports "ERR_CONNECTION_CLOSED". I try a Reset but had no success. On the WDR4300 V1 it works fine.)
Posted: Tue Dec 01, 2015 17:58 Post subject: Re: New Build - 12/01/2015 - r28397
Router Model:TP-Link Archer C7 v2
Status:Working
Reset:No
Errors: ath1 rate displays 1.08308e+06 Gb/s on the system info page. I know its an ongoing error, but it has changed from previously showing 450 Mb/s as it has since I started using dd-wrt almost a year ago.
I'm already loving the miniDLNA change to take the router name instead of model.
Router Model:TP-Link tl-wr1043nd v2
Status:Working
Reset:No
Errors:none observed so far
Last edited by mwbuss8 on Tue Dec 01, 2015 18:26; edited 1 time in total
WRT160NL x3
DD-WRT v3.0-r28397 std (12/01/15)
Linux 3.10.93 #12506 Tue Dec 1 02:32:51 CET 2015 mips
No Reset -- update all 3 live from 28320
Two as WDS bridge.
One is WAP + guests network.
Updated WDS-AP and then station and WAP across WDS bridge.
Working ok with uptime --- only few minutes
No uglies lurking in the logs.
I like it when all goes well
EDIT:
mwbuss8 wrote:
rate displays 1.08308e+06 Gb/s on the system info page.
Why can't I get those super rates on my stuff like you and tatsuya46 gets???
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Tue Dec 01, 2015 19:33 Post subject:
mrjcd wrote:
WRT160NL x3
DD-WRT v3.0-r28397 std (12/01/15)
Linux 3.10.93 #12506 Tue Dec 1 02:32:51 CET 2015 mips
No Reset -- update all 3 live from 28320
Two as WDS bridge.
One is WAP + guests network.
Updated WDS-AP and then station and WAP across WDS bridge.
Working ok with uptime --- only few minutes
No uglies lurking in the logs.
I like it when all goes well
EDIT:
mwbuss8 wrote:
rate displays 1.08308e+06 Gb/s on the system info page.
Why can't I get those super rates on my stuff like you and tatsuya46 gets???
its only on ac routers (ap/wds ap mode) & vht80 must be selected _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers