Linksys EA6350 Support

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3 ... 24, 25, 26, 27  Next
Author Message
technoside2
DD-WRT User


Joined: 25 Oct 2018
Posts: 63

PostPosted: Thu Dec 05, 2019 23:54    Post subject: Reply with quote
What version you have V1 or V2 ? and what FW are you running ? I just did a quick test from my iphone on my 2.4 ghz band and I'm getting 8 mb's down and 7 mb's up. I think 2.4 b/g network is only a max of 11 mb's for transfer rate..
_________________
WRT54GL v1.1 - Flashed
Linksys WRT54G2 v1 - Flashed
EA6350 v2 - Flashed
Sponsor
pentySVK
DD-WRT Novice


Joined: 13 Jul 2014
Posts: 39

PostPosted: Sat Dec 07, 2019 8:14    Post subject: Reply with quote
Oh, I posted it into wrong thread, I have ea6400 Smile

I am moving here https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=172389&postdays=0&postorder=asc&start=1470
magnum226
DD-WRT User


Joined: 24 Mar 2011
Posts: 59

PostPosted: Sun Dec 15, 2019 13:29    Post subject: Reply with quote
What firmware are you folks running on EA6350v1? I have several running kong 33675m and wondering if there is a newer (and stable) version..
technoside2
DD-WRT User


Joined: 25 Oct 2018
Posts: 63

PostPosted: Tue Dec 17, 2019 1:12    Post subject: Reply with quote
magnum226 wrote:
What firmware are you folks running on EA6350v1? I have several running kong 33675m and wondering if there is a newer (and stable) version..


I'm using : https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=322339

BS 41686: 12-10-2019-r41686

I have a ea6350 v2 so far it's been pretty stable. Every time I reboot the 2.4ghz wireless looses it's security settings .. I just re-apply and save after reboot. not a big deal. overall it's pretty stable. really good 5ghz speed.

_________________
WRT54GL v1.1 - Flashed
Linksys WRT54G2 v1 - Flashed
EA6350 v2 - Flashed
magnum226
DD-WRT User


Joined: 24 Mar 2011
Posts: 59

PostPosted: Wed Dec 18, 2019 14:06    Post subject: Reply with quote
technoside2 wrote:
magnum226 wrote:
What firmware are you folks running on EA6350v1? I have several running kong 33675m and wondering if there is a newer (and stable) version..


I'm using : https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=322339

BS 41686: 12-10-2019-r41686

I have a ea6350 v2 so far it's been pretty stable. Every time I reboot the 2.4ghz wireless looses it's security settings .. I just re-apply and save after reboot. not a big deal. overall it's pretty stable. really good 5ghz speed.


Thanks! I see from earlier in the thread you ran Kong 38100M for awhile. Was it a good build for you? Do you have a link to it by chance?
technoside2
DD-WRT User


Joined: 25 Oct 2018
Posts: 63

PostPosted: Thu Dec 19, 2019 0:46    Post subject: EA6350 V2 Reply with quote
magnum226 wrote:
technoside2 wrote:
magnum226 wrote:
What firmware are you folks running on EA6350v1? I have several running kong 33675m and wondering if there is a newer (and stable) version..


I'm using : https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=322339

BS 41686: 12-10-2019-r41686

I have a ea6350 v2 so far it's been pretty stable. Every time I reboot the 2.4ghz wireless looses it's security settings .. I just re-apply and save after reboot. not a big deal. overall it's pretty stable. really good 5ghz speed.


Thanks! I see from earlier in the thread you ran Kong 38100M for awhile. Was it a good build for you? Do you have a link to it by chance?


Have you heard of this ??
archive of files -
http://ddwrt-kong.clonevince.fr/

Here's a link from my personal drive of the EA6350 only.
The folder you're looking for is 12_28_18. The build release date was 12_27_18.

https://drive.google.com/open?id=1Z_9DWO-U4Mh2CeMtIecppKHTsFCc45r0

_________________
WRT54GL v1.1 - Flashed
Linksys WRT54G2 v1 - Flashed
EA6350 v2 - Flashed
magnum226
DD-WRT User


Joined: 24 Mar 2011
Posts: 59

PostPosted: Thu Dec 19, 2019 1:26    Post subject: Re: EA6350 V2 Reply with quote
technoside2 wrote:
magnum226 wrote:
technoside2 wrote:
magnum226 wrote:
What firmware are you folks running on EA6350v1? I have several running kong 33675m and wondering if there is a newer (and stable) version..


I'm using : https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=322339

BS 41686: 12-10-2019-r41686

I have a ea6350 v2 so far it's been pretty stable. Every time I reboot the 2.4ghz wireless looses it's security settings .. I just re-apply and save after reboot. not a big deal. overall it's pretty stable. really good 5ghz speed.


Thanks! I see from earlier in the thread you ran Kong 38100M for awhile. Was it a good build for you? Do you have a link to it by chance?


Have you heard of this ??
archive of files -
http://ddwrt-kong.clonevince.fr/

Here's a link from my personal drive of the EA6350 only.
The folder you're looking for is 12_28_18. The build release date was 12_27_18.

https://drive.google.com/open?id=1Z_9DWO-U4Mh2CeMtIecppKHTsFCc45r0


Thanks!

Yes - I know about the Kong repository site, but couldn't find that version unless i completely missed it.
Newgel
DD-WRT Novice


Joined: 07 Sep 2008
Posts: 31

PostPosted: Tue Jan 07, 2020 21:53    Post subject: Reply with quote
technoside2 wrote:


I have a ea6350 v2 so far it's been pretty stable. Every time I reboot the 2.4ghz wireless looses it's security settings .. I just re-apply and save after reboot. not a big deal. overall it's pretty stable. really good 5ghz speed.


I have the exact same problem. Is anyone working on a solution or is there any known workaround for this 2.4ghz wireless config issue?

I even tried to create a script to re-apply settings at boot time but I was unable to identify which commands are run when we click on "apply settings". Everything I tried failed.
technoside2
DD-WRT User


Joined: 25 Oct 2018
Posts: 63

PostPosted: Wed Jan 08, 2020 2:53    Post subject: Reply with quote
Newgel wrote:
technoside2 wrote:


I have a ea6350 v2 so far it's been pretty stable. Every time I reboot the 2.4ghz wireless looses it's security settings .. I just re-apply and save after reboot. not a big deal. overall it's pretty stable. really good 5ghz speed.


I have the exact same problem. Is anyone working on a solution or is there any known workaround for this 2.4ghz wireless config issue?

I even tried to create a script to re-apply settings at boot time but I was unable to identify which commands are run when we click on "apply settings". Everything I tried failed.



I just stopped rebooting my router.. I used to have it reboot once a week but honestly I only reboot it now with a FW upgrade. I just remember to re-apply the 2.4 ghz security every time.

_________________
WRT54GL v1.1 - Flashed
Linksys WRT54G2 v1 - Flashed
EA6350 v2 - Flashed
NotQuiteAKing
DD-WRT Novice


Joined: 10 Jan 2020
Posts: 1

PostPosted: Mon Jan 13, 2020 20:01    Post subject: Reply with quote
Hi, new to this but I've managed to successfully install the KONG build technoside2 listed above on my EA6350 v1 and its been fairly stable the past couple of days.

One problem I'm having is I've setup a NAS using an external HDD, but it's running fairly slow. Upload speeds consistently stuck at 10MB/s while Download speeds are typically as low as 3 MB/s.

Is this a build issue, a USB issue or has something gone wrong with my install?
technoside2
DD-WRT User


Joined: 25 Oct 2018
Posts: 63

PostPosted: Mon Jan 13, 2020 23:46    Post subject: Reply with quote
NotQuiteAKing wrote:
Hi, new to this but I've managed to successfully install the KONG build technoside2 listed above on my EA6350 v1 and its been fairly stable the past couple of days.

One problem I'm having is I've setup a NAS using an external HDD, but it's running fairly slow. Upload speeds consistently stuck at 10MB/s while Download speeds are typically as low as 3 MB/s.

Is this a build issue, a USB issue or has something gone wrong with my install?


I've switched over to (BS) BrainSlayer Builds b/c KONG has left DD-WRT for development. I just upgraded to the 1/9/20 build of BS. So far it's been pretty stable. I do not use the USB nas portion of dd-wrt so I'm not sure of issues. Good luck guys !! and happy flashing.

_________________
WRT54GL v1.1 - Flashed
Linksys WRT54G2 v1 - Flashed
EA6350 v2 - Flashed
gentlevikinglord
DD-WRT Novice


Joined: 24 Jan 2020
Posts: 1

PostPosted: Fri Jan 24, 2020 4:58    Post subject: Reply with quote
roybatty wrote:
jfunk7997 wrote:
guillaumedsde wrote:
To anyone with the ea6350v2, it seems like if you update to the latest official firmware and then flash latest ddwrt it works.

It does not reboot to the second partition with the stock firmware.

If you do want to go back to the stock firmware, do a 30/30/30 reset.

IMPORTANT
if you do decide to flash ddwrt, do know that the reset button only resets the stock partition's data not ddwrt's, hence the reset does not work for DDWRT.

I learned the lesson the hard way as I am locked out of the web interface with no other way to access the router.

HOWEVER
if you're not like me and don't lose the password to the web interface, it seems like ddwrt is working great

I have a v2, but I can't get the linksys firmware to flash the webflash file. It just gives an invalid firmware error. I'm new to flashing routers. Am I missing something?


Following guillaumedsde's advice I have successfully flashed the latest DD-WRT build (01-19-2018-r34578) after updating to the latest LinkSys EA6530 V2's build (2.1.2.184309).

I used the LinkSys UI to perform both updates and each was successful at first attempt. My router was bought specifically for the purpose of setting up a VPN endpoint on my network and these updates were the first things I did out of the box.

I have been running what appears to be a stable environment for a little over a day now. I haven't used the reset button on the box, but rather if I need to I switch it off and then back on again (only had to do this to move it from one power outlet to another).

Still got a bit to do to get the router doing what I need for my network, but all looks good from a DD-WRT point of view...


Hi this sounds great can anyone tell me exactly what you mean by "latest DD-WRT build (01-19-2018-r34578)" above? Is that a file or a family of files and if it is a family, which one do I want? The one for the 6350v1? Thanks.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7446
Location: Texas, USA

PostPosted: Fri Jan 24, 2020 15:45    Post subject: Reply with quote
gentlevikinglord wrote:
Hi this sounds great can anyone tell me exactly what you mean by "latest DD-WRT build (01-19-2018-r34578)" above? Is that a file or a family of files and if it is a family, which one do I want? The one for the 6350v1? Thanks.


Looks like you've pulled something completely out of the middle or towards the end of this thread without looking into your specific device. Please re-read this thread in it's entirety to figure out how to install DD-WRT on the EA6350.

Doing some digging, it looks like it wasn't officially supported until 28139

The current build is 42054

You should do some research in the build threads and read this thread in it's entirety before making any hasty decisions, perhaps.

_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
ZaurS
DD-WRT Novice


Joined: 22 Nov 2019
Posts: 2

PostPosted: Thu Feb 06, 2020 2:45    Post subject: Reply with quote
I have red all pages and I am still confused Sad Is there any regular less painful way to flash EA6350 V2 to dd-wrt without calling witches? Appreciate if somebody can advise and throw the link to stable build.
ZaurS
DD-WRT Novice


Joined: 22 Nov 2019
Posts: 2

PostPosted: Thu Feb 06, 2020 22:20    Post subject: Reply with quote
kernel-panic69 wrote:
gentlevikinglord wrote:
Hi this sounds great can anyone tell me exactly what you mean by "latest DD-WRT build (01-19-2018-r34578)" above? Is that a file or a family of files and if it is a family, which one do I want? The one for the 6350v1? Thanks.


Looks like you've pulled something completely out of the middle or towards the end of this thread without looking into your specific device. Please re-read this thread in it's entirety to figure out how to install DD-WRT on the EA6350.

Doing some digging, it looks like it wasn't officially supported until 28139

The current build is 42054

You should do some research in the build threads and read this thread in it's entirety before making any hasty decisions, perhaps.


You know, I did exactly the same as it was described. Updated to the latest LinkSys EA6530 V2's build (2.1.2.184309) manually. Downloaded the latest dd-wrt build (actually a few of them) and tried to upload into my router but it did not accepted that. See attached screenshot.

So, apparently people competency is not the case. It just looks like a matter of luck which is not mentioned anywhere in this thread.



IMG-3656.JPG
 Description:
 Filesize:  114.48 KB
 Viewed:  4672 Time(s)

IMG-3656.JPG


Goto page Previous  1, 2, 3 ... 24, 25, 26, 27  Next Display posts from previous:    Page 25 of 27
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum