how to conect 802.1x?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Hardware DIY / Hardware Mods
Author Message
latvietis75
DD-WRT Novice


Joined: 24 Sep 2015
Posts: 5

PostPosted: Thu Sep 24, 2015 13:45    Post subject: how to conect 802.1x? Reply with quote
I dont now if this is right place to post
i did everyithing from this post https://www.dd-wrt.com/wiki/index.php/Linksys_WRT54GS_v5.0_%26_5.1_%26_6.0

i have wrt54gs v6. where can i put my login and pass?
or where can i edite config file.

i am not that advanced person like you probably i just did everything step by step thats all Razz

if you can help me pls msg here or skype latvietis75
Sponsor
latvietis75
DD-WRT Novice


Joined: 24 Sep 2015
Posts: 5

PostPosted: Wed Sep 30, 2015 17:54    Post subject: Reply with quote
is any1 who can help?
i have done everything what i can.


any1?
latvietis75
DD-WRT Novice


Joined: 24 Sep 2015
Posts: 5

PostPosted: Mon Oct 05, 2015 15:18    Post subject: Reply with quote
so i am trying to extraxt frimware by this guide https://bitsum.com/firmware_mod_kit.htm#Instructions
but so far i have problems to extraxt can any1 help?

or shoud i use difrent tool to extraxt?
js1662
DD-WRT Guru


Joined: 23 Jul 2014
Posts: 1237
Location: BC, CA

PostPosted: Wed Oct 07, 2015 8:07    Post subject: Reply with quote
It seems like you want to flash dd-wrt to your WRT54GS v6 router. Am I right? If so, this is not the right forum. You should post it on the Broadcom forum. In the post, please be more specific such as at which step of the wiki that you are facing problem. Also, don't forget to take a look at the Peacock Thread: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486

I don't understand why you suddenly work on extracting the Firmware on your last post. It doesn't seems like it has anything to do with flashing. The Firmware modification kit is used only if you have a need to modify the firmware. If you really want information on the firmware modification kit, you should start another thread instead of mixing it with your original thread on flashing. There is a better wiki on the firmware modification kit, please take a look at this two wiki:

http://www.dd-wrt.com/wiki/index.php/Development

https://code.google.com/p/firmware-mod-kit/wiki/Documentation
latvietis75
DD-WRT Novice


Joined: 24 Sep 2015
Posts: 5

PostPosted: Wed Oct 07, 2015 20:42    Post subject: Reply with quote
First my university uses 802.1x autho. i want to make my ruter acces point from wire to phone/tablet/laptop.

I flashed already in its working
but what i need is somewhere to enter my username and password for my 802.1x authentication

inside web gui i cant find where to enter it so i thout i need to do it in frimware? am i wrong?

sorry for bad english
js1662
DD-WRT Guru


Joined: 23 Jul 2014
Posts: 1237
Location: BC, CA

PostPosted: Thu Oct 08, 2015 2:33    Post subject: Reply with quote
Although I don't have much experience on 802.1x authentication, I found this thread on similar subject for your reference:
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=669021
latvietis75
DD-WRT Novice


Joined: 24 Sep 2015
Posts: 5

PostPosted: Mon Oct 12, 2015 19:00    Post subject: Reply with quote
i have seen that post.
but where do i enter all that comands?
thats reason why i thout i need to extract frimware and enter in there.
js1662
DD-WRT Guru


Joined: 23 Jul 2014
Posts: 1237
Location: BC, CA

PostPosted: Sat Oct 17, 2015 6:51    Post subject: Reply with quote
What commands are you thinking of entering? Most of the time, you SSH to the router to enter commands.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Hardware DIY / Hardware Mods All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum