New build: DD-WRT v3.0 --- 27783 --- 2015/09/08

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
KrypteX
DD-WRT Guru


Joined: 18 Jan 2014
Posts: 2411

PostPosted: Tue Sep 08, 2015 13:00    Post subject: New build: DD-WRT v3.0 --- 27783 --- 2015/09/08 Reply with quote
DD-WRT build 27783 - 2015/09/08 has been released: ftp://ftp.dd-wrt.com/betas/2015/09-08-2015-r27783/

Changelog excerpt from http://www.dd-wrt.com/phpBB2/viewtopic.php?t=279467

Your reports for Broadcom units are highly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:

This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 27783_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. PLEASE ALSO DO NOT RESPOND TO SUCH QUESTIONS! This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

_________________
THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX

Testing BrainSlayer's DD-WRT build 31924 on various units:
NETGEAR : WNDR3800 WNDR3800CH WNDRMACv2 WNDRMACv1 WNR2200 WNR2000v3
TP-LINK : ArcherC7v3 WR1043NDv3 WR740Nv4 WR740Nv6 WR710Nv1 WR810Nv1 WA850REv1 WA901NDv3 WA901NDv4
D-LINK : DIR-862L DIR-615D2
ASUS : RT-N10 C1
VirtualBox : x86_64


Last edited by KrypteX on Tue Sep 08, 2015 21:04; edited 2 times in total
Sponsor
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5398
Location: Texas

PostPosted: Tue Sep 08, 2015 15:15    Post subject: Reply with quote
WRT54GSv2
DD-WRT v3.0-r27783 mega (09/08/15)
Linux 2.4.37 #41671 Tue Sep 8 06:07:55 CEST 2015 mips

Repeater working very well.
Using WPA2 aes with different PW on VAP

Didn't check Repeater Bridge but I suspect it don't work ... hasn't on any 2.4 builds in long time.

Site Survey working again Smile
Wiviz survey working
uptime 43 min

hmmm... and now I really have no idea why I put this on this box -
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5398
Location: Texas

PostPosted: Tue Sep 08, 2015 15:34    Post subject: Reply with quote
Netgear WNDR3700v3
DD-WRT v3.0-r27783 mega (09/08/15)
Linux 3.10.87 #9587 Tue Sep 8 10:31:07 CEST 2015 mips
[dd-wrt.v24-27783_NEWD-2_K3.x_mega-nv64k.bin]
NO reset update live
previous 27775

updated wirelessly thru WRT54GS repeater to the wndr3700v3

Using as main router
All seems good so far
No errors
uptime 12 min
ddaniel51
DD-WRT Guru


Joined: 19 Feb 2013
Posts: 1408

PostPosted: Wed Sep 09, 2015 0:29    Post subject: Reply with quote
Up on 2 R7000 as main and AP.
No problems.

_________________
Segment 1 R9000 10Gb LAN, 1Gb ISP BS
Test Bed R9000 10Gb LAN
Wired AP 1 Unifi UAP AC PRO 1Gb LAN
Wired AP 2 Unifi UAP AC PRO 1Gb LAN
Wired AP 3 Unifi UAP AC PRO 1Gb LAN
Test Bed R7800 1Gb LAN OpenWRT Kong
download1.dd-wrt.com/dd-wrtv2/downloads/betas/ (Brain Slayer)
www.desipro.de/openwrt/ (Kong's)
YAMon
https://usage-monitoring.com/index.php
cc999
DD-WRT User


Joined: 20 Feb 2015
Posts: 110

PostPosted: Wed Sep 09, 2015 1:17    Post subject: R7000 Reply with quote
Edimax AC USB wireless adapter connects at 144 mbps. Went back to stock connection rate is back to 867 mbps.

CC
nolimitz
DD-WRT Guru


Joined: 26 Nov 2010
Posts: 572

PostPosted: Wed Sep 09, 2015 7:20    Post subject: Reply with quote
Netgear R6300V2

updated remotely through web gui without reset, rebooted fine and wireless clients are connected. will revert back later if i find issues.
SinCalChewy
DD-WRT User


Joined: 09 Nov 2014
Posts: 312
Location: Bakersfield, CA

PostPosted: Wed Sep 09, 2015 10:37    Post subject: Reply with quote
Router: Linksys e3000
Firmware: dd-wrt.v24-27783_NEWD-2_K3.x_mega-e3000.bin
Previous: dd-wrt.v24-27775_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.87 #9587 Tue Sep 8 10:31:07 CEST 2015 mips
Status: Working well so far
Reset: No
Errors: None thus far. Cool

_________________
[size=9]
Deployed Routers:
Netgear R7800 - 1x build 45493
- Gateway (USB /w Entware, CAKE QoS)
Netgear R7000 - 5x build 45493
lucian_radu
DD-WRT Novice


Joined: 13 Oct 2014
Posts: 4

PostPosted: Wed Sep 09, 2015 11:33    Post subject: Reply with quote
Router: Linksys E1000 v2.1
Firmware: DD-WRT v3.0-r27783 mini (09/08/15)
Kernel: Linux 2.6.24.111 #26837 Tue Sep 8 02:46:32 CEST 2015 mips
Stratus: OK-
Reset: Yes
Error: Repeater Bridge not working with add virtual interface (vap), but WORKING without virtual interface VAP - tested on LAN port.



messages.txt
 Description:
Log

Download
 Filename:  messages.txt
 Filesize:  16.13 KB
 Downloaded:  564 Time(s)



Last edited by lucian_radu on Thu Sep 10, 2015 8:03; edited 1 time in total
stephensuley
DD-WRT Guru


Joined: 09 Feb 2008
Posts: 639
Location: Canada

PostPosted: Wed Sep 09, 2015 12:08    Post subject: Reply with quote
Router: Asus RT-AC68U
Firmware: DD-WRT v3.0-r27783 std (09/08/15)
Kernel: Linux 3.10.87 #4581 SMP armv7
Status: All working an online
Reset: No
Errors: None to report

Notes:
Upgraded from previous 27xxx build using the web GUI. Both radios were enabled in AP mode, clients connected, USB enabled, WAN disabled. no issues.


The notes says iperf update. I would enjoy native iperf in the firmware. When I run iperf from the CLI I get not found Is there something I am missing?

Mod edit: see this
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=285763

_________________
Location (urban) - 1x Linksys EA8500 (AP wlan0 & wlan1 enabled)
1x Asus 68u (Repeater Bridge w/VAP) - wl0 disabled
1x Asus 87u (Client Bridge) - wl1 disabled


Latest and greatest builds Wink
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5398
Location: Texas

PostPosted: Wed Sep 09, 2015 13:46    Post subject: Reply with quote
Two Linksys WAP54G v3.x
DD-WRT v3.0-r27783 micro (09/08/15)
Linux 2.4.37 #41676 Tue Sep 8 06:13:14 CEST 2015 mips
Update live from previous
DD-WRT v24-sp2 (05/09/15) micro - build 26866
Linux 2.4.37 #40740 Sat May 9 03:37:50 CEST 2015 mips

These are hanging out in the shop -
WAP54Gv3.1 Client Bridge mode
WAP54Gv3.1 AP

It's all good !!!
Corsair1274
DD-WRT User


Joined: 08 Jul 2012
Posts: 51

PostPosted: Wed Sep 09, 2015 14:39    Post subject: Reply with quote
Router: WZR-1750-dhp (X3)
WZR-HP-AG300H
Firmware: 27783
Status: Working
Reset: None
Errors: None noticed yet

Wireless says working at 866.7 Mbps Very Happy Left computer connected all night with no disconnects

I will be slowly enabling services to see how it responds.
mystykmax
DD-WRT User


Joined: 06 Jan 2014
Posts: 99

PostPosted: Wed Sep 09, 2015 14:53    Post subject: Reply with quote
R7000 (as a router/gateway) and R6300v2 (as an AP) working great!
Bernadoe
DD-WRT User


Joined: 03 Dec 2014
Posts: 217

PostPosted: Wed Sep 09, 2015 16:41    Post subject: Reply with quote
Router: Netgear R7000
Firmware: DD-WRT v3.0-r27783 std (09/08/15)
Kernel: 3.10.87 #4581 SMP Mon Sep 7 07:22:00 CEST 2015 armv7l
Status: Working
Reset: None
Errors: None
Devianttwo
DD-WRT Novice


Joined: 26 Aug 2015
Posts: 27

PostPosted: Thu Sep 10, 2015 0:52    Post subject: Reply with quote
Linksys EA6300 (Main Router)
DD-WRT v3.0-r27783 std (09/08/15)
Linux 3.10.87 #4581 SMP Mon Sep 7 07:22:00 CEST 2015 armv7l

Router is still having a temperature issue. 5Ghz band is disabled as I only have 2 devices that can use it. I have it sitting on a metal fan which keeps the temp around 68c overclocked @ 1400MHZ (Runs the same temp running at 800MHZ) IPV6 is enabled and working properly. Nothing else wrong with the router from what I can see. Still wish we had a resolution to the temperature issue. It appears to affect alot of people. (Linksys EA6300 was only added as a supported router less then a month ago)

Speedtest results get up to 90mbps on both IPV4 and IPV6 (I pay for 75mbps with 100mbps boost.

------------------------------------------------------


Linksys WRT54Gv5 (Router used for Outside Access Point)
DD-WRT v3.0-r27783 micro (09/08/15)
Linux 2.4.37 #41676 Tue Sep 8 06:13:14 CEST 2015 mips
dd-wrt.v24_micro_generic.bin

&&&

Linksys WRT54Gv8 (Router used for Inside Access Point)
DD-WRT v3.0-r27783 micro (09/08/15)
Linux 2.4.37 #41676 Tue Sep 8 06:13:14 CEST 2015 mips
dd-wrt.v24_micro_generic.bin

Upgrading my old routers for the first time in almost 7 YEARS. Both are running as AP's. Both working perfect. WAN to LAN Switch is enabled on both. Speed test through LAN Port: http://results.speedtest.comcast.net/result/1035408024.png

I get 85mbps direct to my main router. So 83mbps throughput is dang good.
SinCalChewy
DD-WRT User


Joined: 09 Nov 2014
Posts: 312
Location: Bakersfield, CA

PostPosted: Thu Sep 10, 2015 2:36    Post subject: Reply with quote
Router: Linksys e900
Firmware: dd-wrt.v24-27783_NEWD-2_K3.x_mega-e900.bin
Previous: dd-wrt.v24-27775_NEWD-2_K3.x_mega-e900.bin
Kernel: Linux 3.10.87 #9587 Tue Sep 8 10:31:07 CEST 2015 mips
Status: Working
Reset: Yes
Errors: None thus far.

_________________
[size=9]
Deployed Routers:
Netgear R7800 - 1x build 45493
- Gateway (USB /w Entware, CAKE QoS)
Netgear R7000 - 5x build 45493
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum