tplink-wr1043nd-v1 httpd not starting after reboot

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Author Message
gwaitsi
DD-WRT User


Joined: 11 Jan 2007
Posts: 79

PostPosted: Thu Aug 20, 2015 22:01    Post subject: tplink-wr1043nd-v1 httpd not starting after reboot Reply with quote
- I have HTTP/HTTPS enabled in the web interface.
- every time i reboot, the web interface doesn't work.
- i've tried using nvram enable/commit lines per other posts but it doesn't help.

After each reboot, web GUI doesn't come up.

I then have to telnet to the box and execute
httpd restart

I am wondering it if could be a race condition at startup?

After that, the web interface comes back up.
But i continue to have the same problem with https

http://www.dd-wrt.com/phpBB2/viewtopic.php?p=979652#979652
Sponsor
gwaitsi
DD-WRT User


Joined: 11 Jan 2007
Posts: 79

PostPosted: Mon Aug 24, 2015 11:37    Post subject: Reply with quote
upgraded to 27700 and it didn't solve the problem
rpvdb
DD-WRT Novice


Joined: 17 Jan 2011
Posts: 8

PostPosted: Mon Aug 24, 2015 14:16    Post subject: Reply with quote
I seem to have a similar problem. In my case, SSH and telnet are turned off. Guess that equals bricking? Sad
h8red
DD-WRT Guru


Joined: 28 Jun 2011
Posts: 580
Location: Vilnius, Lithuania

PostPosted: Mon Aug 24, 2015 14:58    Post subject: Reply with quote
rpvdb wrote:
I seem to have a similar problem. In my case, SSH and telnet are turned off. Guess that equals bricking? Sad

Seems like so. If you are on builds 27700, 27716 or 27734, reset button does not work. You have a problem Sad

_________________
[Ramips] Nexx WT3020F Openwrt @kernel #4.14.167 (OpenVPN server, Wireguard server, AD blocking, SQM QOS, USB)
rpvdb
DD-WRT Novice


Joined: 17 Jan 2011
Posts: 8

PostPosted: Mon Aug 24, 2015 15:01    Post subject: Reply with quote
on 27734, so I'm afraid my reset button will not work, will try when home. Any advice as to how to bring this investment requirement to the lady is welcome... Wink
rpvdb
DD-WRT Novice


Joined: 17 Jan 2011
Posts: 8

PostPosted: Mon Aug 24, 2015 15:11    Post subject: Reply with quote
Had someone remote reboot the device (yes, the lady), and seems I am lucky, httpd came back up. Re-enabled ssh and telnet straight away of course...
h8red
DD-WRT Guru


Joined: 28 Jun 2011
Posts: 580
Location: Vilnius, Lithuania

PostPosted: Mon Aug 24, 2015 15:12    Post subject: Reply with quote
http://wiki.openwrt.org/toh/tp-link/tl-wr1043nd
Here is some information

_________________
[Ramips] Nexx WT3020F Openwrt @kernel #4.14.167 (OpenVPN server, Wireguard server, AD blocking, SQM QOS, USB)
gwaitsi
DD-WRT User


Joined: 11 Jan 2007
Posts: 79

PostPosted: Tue Aug 25, 2015 17:02    Post subject: Reply with quote
but nobody has the problem that httpd does not start after rebot, only after telnet/ssh connection?
eshc78
DD-WRT Novice


Joined: 25 May 2015
Posts: 34

PostPosted: Tue Aug 25, 2015 17:55    Post subject: Reply with quote
Enable only http. Don`t https
gwaitsi
DD-WRT User


Joined: 11 Jan 2007
Posts: 79

PostPosted: Tue Aug 25, 2015 20:07    Post subject: Reply with quote
so, i did a factory default reset. tried the following:

echo | openssl s_client -connect 192.168.1.1:443 -ssl3 2>&1 | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p'

did not return anything

also tried
grep -q "tls" /usr/lib/libssl.so.1.0.0 2> /dev/null && echo "TLS is supported." || echo "TLS is not available in your build."

TLS not supported for me......

can this be right? i thought this router had 32Mg flash so no reason it should not be fully optioned.
TP-Link TL-WR1043ND
Firmware Version
DD-WRT v3.0-r27745 std (08/25/15)
Kernel Version
Linux 3.10.87 #7871 Tue Aug 25 03:04:26 CEST 2015 mips
gwaitsi
DD-WRT User


Joined: 11 Jan 2007
Posts: 79

PostPosted: Tue Aug 25, 2015 21:36    Post subject: Reply with quote
fyi - i solved the httpd startup issue by doing a factory reset and recreating the config from scratch and not selecting https. Turning off https alone, did not solve the problem.

however, the https issue is still prevalent and i guess is related to my previous comment.
gwaitsi
DD-WRT User


Joined: 11 Jan 2007
Posts: 79

PostPosted: Sat Oct 03, 2015 6:16    Post subject: Reply with quote
still no answer why there is no tls or the certificate is not available in the build?

just tried 27858 - v3 simiply doesn't work well with this router.

Last good version for this router was v24 sp2 23-05-2014
everything after requires "httpd restart" to bring up the web interface. but the router still doesn't have SSL built in, even in this version.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum