DD-WRT V24 Final Special Edition fixup (WRT310 support)

This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom Customer Downloads & Updates
Goto page 1, 2  Next
Author Message
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7031
Location: Dresden, Germany

PostPosted: Tue May 20, 2008 6:21    Post subject: DD-WRT V24 Final Special Edition fixup (WRT310 support) Reply with quote
some people might notice that i reuploaded the v24 builds made by chris. not a good idea todo a vacation in california sometimes. this fixup should resolve load and firewall problems introduced in the final build and should also run more stable on micro devices.

note:
mega will follow, its not yet prepared as special build

_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s


Last edited by BrainSlayer on Tue Jul 01, 2008 10:35; edited 6 times in total
Sponsor
bogus1965
DD-WRT Novice


Joined: 08 Aug 2007
Posts: 15

PostPosted: Tue May 20, 2008 12:06    Post subject: Reply with quote
Well, I can confirm that the message

Code:
vpn modules successfully unloaded

does not appear in syslog any longer.

But Chillispot is still not working Sad

No error, nothing, it just don't give an IP to the clients.

Somehow I feel like a guinea pic running in it's wheel.

Even if I belief my configuration is correct, at least it was working since v23 SP2, I may miss something for v24 final.

It might be that I did not configure it correctly in v23 SP2 but it does not cause a problem and v24 is not that tolerant.

(see my config here http://www.dd-wrt.com/phpBB2/viewtopic.php?t=31970&highlight=&sid=0c8a04469692d28b3862728298ac30b2

Any help/hint is welcome...

Cheers
bogus1965
DD-WRT Novice


Joined: 08 Aug 2007
Posts: 15

PostPosted: Tue May 20, 2008 16:37    Post subject: Reply with quote
Finally, I got it working.

After having an one hour walk at the beach I started over again.

Going back to v23 SP3 mini (hard reset) and flashing dd-wrt.v24-9517_VINT_std.bin (hard reset) I got chilli working.

Well, actually I am sure I have not had any typo in my chilli config because if something goes wrong I compare (using Notepad++) the current config with a save known working config. Usually I find these nitty gritty typos that way.

Anyways, the last step was to flash dd-wrt.v24_std_special_generic.bin BS posted today.

And, it works! Cron enabled, TTraff enabled.

Now I will try it with a different router.

Cheers
vanrion
DD-WRT Novice


Joined: 28 Mar 2008
Posts: 14

PostPosted: Wed May 21, 2008 3:08    Post subject: Reply with quote
all the special version of dd-wrt dont work with my wrt54gs v7.2.
any solution?
thx
buntherng
DD-WRT Novice


Joined: 30 Aug 2006
Posts: 17

PostPosted: Wed May 21, 2008 4:06    Post subject: Re: DD-WRT V24 Final Special Edition fixup Reply with quote
BrainSlayer wrote:
this fixup

I think the something wrong about micro_special_generic, I don't know it wrong or you want to change the default IP address to 192.168.180.1?
After I try install to WRT54G v5 (From v24 RC4) then can't login with 192.168.1.1. May be something wrong, I test by connect RS232 and monitor the start up log. It's show IP address like 192.168.180.1 after that try connect by use IP 192.168.180.1 which work!
vanrion
DD-WRT Novice


Joined: 28 Mar 2008
Posts: 14

PostPosted: Wed May 21, 2008 9:35    Post subject: Reply with quote
how to read the ip address of the router?

ive tried all the v24 special version. and nothing works.

T_T
sike420
DD-WRT Novice


Joined: 25 Sep 2007
Posts: 1

PostPosted: Fri May 23, 2008 9:41    Post subject: Reply with quote
fyi micro works perfect here
2 x WRT54G v5.1 upgraded from V24RC5 & V23SP2 special
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Fri May 23, 2008 11:06    Post subject: Re: DD-WRT V24 Final Special Edition fixup Reply with quote
buntherng wrote:
BrainSlayer wrote:
this fixup

I think the something wrong about micro_special_generic, I don't know it wrong or you want to change the default IP address to 192.168.180.1?
After I try install to WRT54G v5 (From v24 RC4) then can't login with 192.168.1.1. May be something wrong, I test by connect RS232 and monitor the start up log. It's show IP address like 192.168.180.1 after that try connect by use IP 192.168.180.1 which work!


the micro ip problem is known and will be fixed soon

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7031
Location: Dresden, Germany

PostPosted: Sat May 24, 2008 17:32    Post subject: Reply with quote
its reuploaded now
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
kikiconnected
DD-WRT Novice


Joined: 08 Aug 2006
Posts: 35

PostPosted: Sat May 24, 2008 23:38    Post subject: V24 Reply with quote
Hello BS!!

I really respect you and I think DD-WRT firmware is best thing happened to me.
I have been using it for 5 years on almost every router I got.
I will be honest with you so please no hard fillings.
I think this final v24 is really no good.
Just problems, errors and so on....
Your version RC-4 special works like a charm comparing to these.
I dont know what to say please dont care about visualization of the firmware so much and make it function better.
Also I dont understand why you changed look of your official site? Before that everything was cheap to find and was really functional. I have a lot of friends and nobody likes it.
Before page was like firmware theme and was awesome.

RESPECT,
KIKI
kikiconnected
DD-WRT Novice


Joined: 08 Aug 2006
Posts: 35

PostPosted: Sun May 25, 2008 0:00    Post subject: Reply with quote
About micro problems?
It has more problems of course:

First:
it changes default ip to
192.168.180.1 .
Second:
Repeater mode works really bad and
you cannot access your virtual ap
if security is enabled .
Dhcp wont give you ip
Third:
There was no message that upgrade was sucessfull
after web upgrade to v24 and no redirection to main start ip .
Fourth:
With older firmware I could accessed my other router with mac filtering enabled.Yes wan mac is listed and it works with older versions.With v 24 I was forced to add wireless mac from other router then I was able to connect it didnt with listen wan mac.
EXAMPLE:

00 1A FF 01 A3 41 IS WAN MAC ADDRESS
00 1A FF 01 A3 42 IS WLAN MAC ADDRESS

So with older versions router could connect because of the wan mac listed.
With new I was forced to input wlan mac address to be able to connect.Or clone that wan would be same as wlan.
vanrion
DD-WRT Novice


Joined: 28 Mar 2008
Posts: 14

PostPosted: Sun May 25, 2008 0:31    Post subject: Reply with quote
i dunno why, i cant just access the GUI with the special version. i tried to enter all the ip address i knew, and tried using arp -a and enter the ip address listed there. nothing works, but i can still use tftp to re-flash it with the normal micro. btw, my router is wrt54gs v7.2
any solution?!
thx b4 ^^
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7031
Location: Dresden, Germany

PostPosted: Sun May 25, 2008 10:07    Post subject: Reply with quote
kikiconnected wrote:
About micro problems?
It has more problems of course:

First:
it changes default ip to
192.168.180.1 .
Second:
Repeater mode works really bad and
you cannot access your virtual ap
if security is enabled .
Dhcp wont give you ip
Third:
There was no message that upgrade was sucessfull
after web upgrade to v24 and no redirection to main start ip .
Fourth:
With older firmware I could accessed my other router with mac filtering enabled.Yes wan mac is listed and it works with older versions.With v 24 I was forced to add wireless mac from other router then I was able to connect it didnt with listen wan mac.
EXAMPLE:

00 1A FF 01 A3 41 IS WAN MAC ADDRESS
00 1A FF 01 A3 42 IS WLAN MAC ADDRESS

So with older versions router could connect because of the wan mac listed.
With new I was forced to input wlan mac address to be able to connect.Or clone that wan would be same as wlan.


i dont know what you mean. the 192.168.180.1 problem is resolved in this build

_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
buntherng
DD-WRT Novice


Joined: 30 Aug 2006
Posts: 17

PostPosted: Sun May 25, 2008 10:46    Post subject: Reply with quote
BrainSlayer wrote:
its reuploaded now

Thank you BrainSlayer. It's work well now. :wink:

WRT54G v5 just upgrade RAM from 8MB to 16MB
Total Available 14.1 MB / 16.0 MB
Firmware VersionDD-WRT v24 (05/24/0Cool micro-special - build 9526
vanrion
DD-WRT Novice


Joined: 28 Mar 2008
Posts: 14

PostPosted: Sun May 25, 2008 11:07    Post subject: Reply with quote
i tried it. still the same, i cant access the GUI. the special version seems to brick my router. not permanently though, i can still re-flash it with the normal 1 and it will work again. but i kinda need the special version as i never used it since i bought it. it just never worked on my wrt54gs v7.2.
any solution to this?
thx b4 ^^
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom Customer Downloads & Updates All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum