USR5461 compatibility

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3, 4, 5, 6, 7, 8, 9  Next
Author Message
orly_otero
DD-WRT Novice


Joined: 08 Jun 2006
Posts: 3

PostPosted: Mon Jun 12, 2006 20:00    Post subject: USR5461 compatibility Reply with quote
Hello there,

Is U.S. Robotics 5461 supported by any dd-wrt micro edition?

USR5461 has Broadcom 5350 @ 200MHz, 2MB Flash, 8MB RAM & USB.

Any guidance will be appreciated.

Thanks in advance,
Orlando
Sponsor
HWS
DD-WRT Guru


Joined: 06 Jun 2006
Posts: 579
Location: Germany

PostPosted: Mon Jun 12, 2006 20:10    Post subject: Re: USR5461 compatibility Reply with quote
orly_otero wrote:
Hello there,

Is U.S. Robotics 5461 supported by any dd-wrt micro edition?

USR5461 has Broadcom 5350 @ 200MHz, 2MB Flash, 8MB RAM & USB.

This device is actual untested
http://wiki.openwrt.org/TableOfHardware#head-f9c6e72f973e0180709c3228e4a7c78ad27decfd

_________________
DD-WRT v23 SP2 (09/13/06) std on WRT54GL V1.1
Last News
orly_otero
DD-WRT Novice


Joined: 08 Jun 2006
Posts: 3

PostPosted: Mon Jun 12, 2006 20:36    Post subject: Reply with quote
Yes, I read it. That is where I found USR 5461 hardware info, but that is openwrt and what I want to use is the micro edition of dd-wrt, then trying to figure out how to use an SD card reader on the USB port to increase capacity.
And since there is support for WRT54G v5 using micro edition, which has similar RAM & Flash, I'm just trying to confirm if is it possible(or not) to flash USR5461 with dd-wrt.

Any success story?

Thanks in advance,
Orlando
Yuregir
DD-WRT Novice


Joined: 11 Nov 2006
Posts: 6

PostPosted: Thu Nov 16, 2006 12:36    Post subject: Reply with quote
Bump
flytiger
DD-WRT User


Joined: 10 Jul 2007
Posts: 55

PostPosted: Tue Jul 10, 2007 19:33    Post subject: Bump Reply with quote
Is there any plan to support USR5461 in v24?
Eko
DD-WRT Developer/Maintainer


Joined: 07 Jun 2006
Posts: 5772

PostPosted: Tue Jul 10, 2007 20:29    Post subject: Reply with quote
I could just work, but it could not.
To add support I need at least nvram dump. The best would be to have cfe.bin and nvram.bin got with JTAG cable.
flytiger
DD-WRT User


Joined: 10 Jul 2007
Posts: 55

PostPosted: Wed Jul 11, 2007 17:54    Post subject: Reply with quote
Thanks for reply, Eko,

I've already flashed v23 sp3 and v24 micro generic into the router, it worked for a while. I can even setup the client bridge working with whr-g125 w/ dd-wrt v.24.
Then after I changed some settings on basic setup (connection type, local ip address, disable dhcp, etc.) then the router keeps rebooting every 5-10 seconds

There are some information about this router on openwrt
http://wiki.openwrt.org/USR5461

I am a newbie in this area, so I do not have JTAG or CFE dump. but the factory firmware is a GPL open source, so you can find the firmware source code here
http://www.usr.com/support/s-gpl-code.asp

Maybe you can reference something in there source code to DD-WRT too for the USB and printer server support. Smile
Eko
DD-WRT Developer/Maintainer


Joined: 07 Jun 2006
Posts: 5772

PostPosted: Wed Jul 11, 2007 19:53    Post subject: Reply with quote
Cool. Then when you have working dd-wrt on it, telnet in, and do

Code:
cat /dev/mtd/0 > /tmp/www/cfe.jpg
cat /dev/mtd/3 > /tmp/www/nvram.jpg


Then point your browser to 192.168.1.1/user/cfe.jpg and save file as cfe.bin.
Do the same for nvram.bin

pm me the files then.
flytiger
DD-WRT User


Joined: 10 Jul 2007
Posts: 55

PostPosted: Thu Jul 12, 2007 6:31    Post subject: Reply with quote
I will do that.

Just got home from work and it's already midnight here. I flashed the router back to usr official firmware after it kept rebooting.

I will do that tomorrow night, flash it to dd-wrt micro then pm you the bin files.

Hope you can figure out more about this router. :-)

Thanks
USR5461
DD-WRT Novice


Joined: 20 Aug 2007
Posts: 1

PostPosted: Mon Aug 20, 2007 18:35    Post subject: Reply with quote
flytiger wrote:
I've already flashed v23 sp3 and v24 micro generic into the router, it worked for a while.


I was unable to load the latest v24 micro generic from

http://www.dd-wrt.com/dd-wrtv2/down.php?path=downloads%2Fbeta%2FGENERIC+BROADCOM+%28Linksys%2CAsus+etc.%29%2Fdd-wrt.v24+beta%2F2007+-+0815/

into the usr5461, with or without adding the header using

https://dev.openwrt.org/attachment/ticket/817/usr5461.diff

usr5461 does have WAIT during the boot, as I was able to restore the original firmware during boot with tftp.

Eko, were you able to gain some further information from flytiger's cfe and nvram files?

Thanks
usera
DD-WRT Novice


Joined: 17 Sep 2006
Posts: 17

PostPosted: Mon Dec 10, 2007 23:32    Post subject: Reply with quote
anymore status on this? I want to install dd-wrt on this. I believe kamikaze works to a point so dd-wrt should be possible.
Eko
DD-WRT Developer/Maintainer


Joined: 07 Jun 2006
Posts: 5772

PostPosted: Tue Dec 11, 2007 14:06    Post subject: Reply with quote
It should work in general.
wmnone
DD-WRT Novice


Joined: 11 Feb 2008
Posts: 2

PostPosted: Mon Feb 11, 2008 13:42    Post subject: Reply with quote
What is the best way to install dd-wrt.v24_std_generic.bin into the USROBOTICS 5461? since the standard file format from USROBOTICS is .USR and those ones are .BIN's
korsakoff
DD-WRT Novice


Joined: 03 May 2008
Posts: 1

PostPosted: Sat May 03, 2008 12:23    Post subject: news about? Reply with quote
What's the status? I would try dd-wrt Smile
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Mon May 05, 2008 16:10    Post subject: Reply with quote
Eko wrote:
It should work in general.


so try it
tftp upload and report back

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Goto page 1, 2, 3, 4, 5, 6, 7, 8, 9  Next Display posts from previous:    Page 1 of 9
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum