Well, I notice a bit improvement on speed and by now are not connections dropouts, Tunnelbear is connecting faster than ever. Unlike the r26635 that was giving troubles keeping the connection. Let's see later. _________________ Routers:
TP-Link TL-MR3220 v1.2 (F: r36410)
TP-Link TL-MR3420 v1.2 (F: r36410)
Linksys WRT54G2 V1 (F: unknown, bricked)
D-Link DWL-2100AP Ver.:A4 (F: stock Ver.:2.50na)
Status: OK
Reset: NO
Errors: Significantly lower Internet transfer rate (using Speedtest) on 5 GHz N-only (13-14 Mbps) versus 2.4 GHz N-only (22.9 Mbps) on a 25 Mbps service. Tested with Nexus 4 (CM12) at the same time of day and the same Speedtest server. Upload rate (2.9 Mbps) and ping (11-15 ms) are the same for both bands, only the download rate changes. Noticed this on build 26446 as well.
Joined: 07 Feb 2011 Posts: 304 Location: Joinville - Santa Catarina - Brasil
Posted: Thu Apr 09, 2015 22:42 Post subject:
Router Model: TP-LINK WR841ND V7
Status: ok
Reset: no
Errors: - PPTP Client from Services TAB still broken since 24160... (http://svn.dd-wrt.com/ticket/3280)
- DNSMasq broken (http://svn.dd-wrt.com/ticket/4059)
You are welcome to test and help to find out the problem.
Joined: 03 Jan 2010 Posts: 7578 Location: YWG, Canada
Posted: Fri Apr 10, 2015 0:51 Post subject:
Tobias Tromm wrote:
Router Model: TP-LINK WR841ND V7
Status: ok
Reset: no
Errors: - PPTP Client from Services TAB still broken since 24160... (http://svn.dd-wrt.com/ticket/3280)
- DNSMasq broken (http://svn.dd-wrt.com/ticket/4059)
You are welcome to test and help to find out the problem.
Set WAN mode to DHCP (and your modem to router mode).
Go to Services -> VPN.
PPTP Client Options -> Enabled;
Server IP or DNS Name: tromm.no-ip.org
Remote Subnet: 10.0.0.0
Remote Subnet Mask: 255.255.255.0
MPPE Encryption: mppe required,no40,no56,stateless
MTU: 1436
MRU: 1436
NAT: Disabled;
Username: TROMM\\dd-wrt
Password: pop@123
Save and Apply Settins, Reboot.
If you use WAN PPTP it will work ok.
If connection is up you will be able to ping the server 10.0.0.1.
Can someone confirm if these settings (pptp client from services tab) are working with another routers?
it doesnt work on any of my routers, doesnt work on my iphone 6, or my pc, but other pptp servers work fine. it seems the problem is ur server or server settings u provided, nothing is connecting to it but i run a pptp server too & i can connect to that fine. the format for user name looks weird, i tried "TROMM\\dd-wrt", "TROMM", "dd-wrt" all the same result no connection. its not cause of subnet overlap im on 10.150.10.x/255.255.255.0 _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
