Author
Message
Tobias Tromm DD-WRT User Joined: 07 Feb 2011 Posts: 304 Location: Joinville - Santa Catarina - Brasil
Posted: Thu Apr 02, 2015 22:57 Post subject:
tatsuya46 wrote: Tobias Tromm wrote: Can someone confirm if GUEST WIFI DHCP is working?
Can someone confirm if DNSMasq is working?
yes
yes
Why it work only for some routers? Because of linux version?
Back to top
Sponsor
mickiedesman DD-WRT Novice Joined: 19 Dec 2014 Posts: 4
Posted: Thu Apr 02, 2015 23:08 Post subject:
Router Model: TPLINK TL-WDR4300 v1
Status: OK
Reset: NO
Errors: None so far
Back to top
tatsuya46 DD-WRT Guru Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Thu Apr 02, 2015 23:25 Post subject:
Tobias Tromm wrote: tatsuya46 wrote: Tobias Tromm wrote: Can someone confirm if GUEST WIFI DHCP is working?
Can someone confirm if DNSMasq is working?
yes
yes
Why it work only for some routers? Because of linux version?
kernel diff, build target, flash space (maybe some piece of it were stripped), or config error probably one of those.. _________________LATEST FIRMWARE(S)
BrainSlayer wrote: we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55797 std
[QUALCOMM] DIR-862L --------------------------------> r55797 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std
Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..
Back to top
mazey DD-WRT User Joined: 05 Jun 2011 Posts: 232
Posted: Fri Apr 03, 2015 2:14 Post subject:
Router Model: Netgear WNDR3800
Status: OK
Reset: Nope
Errors: None
Back to top
neoavi7 DD-WRT Novice Joined: 28 Jan 2014 Posts: 13
Posted: Fri Apr 03, 2015 5:39 Post subject:
Router Model: Buffalo WHR-G300N
Status: Not Working
Reset: Yes
Errors: dnsmasq not working since last many builds
Back to top
gbonny DD-WRT User Joined: 12 Dec 2014 Posts: 71
Posted: Fri Apr 03, 2015 6:31 Post subject:
Router Model: TP-Link Archer C5
Previous version: 26138
Status: OK
Reset: No
Errors: None
Remarks: CPU seems to be ~8 degrees less hot/warm. _________________ ATH TL-WDR4300 v1.3 41686 std K3.10 - router - JFFS2, DynDNS, DNSMasq (DHCP+DNS)
ATH WRT160NL v1.0 42132 std K3.10 - router
BRCM WRT160N v1.0 26635 vpn K2.4 - router
BRCM WRT320N v1.0 27858 mega K3.10 - access point
Back to top
grymster DD-WRT User Joined: 04 Feb 2011 Posts: 88 Location: SPb, Russia
Posted: Fri Apr 03, 2015 6:46 Post subject:
Router Model: Netgear WNDR4300
Browser: Firefox
Version: 37.0.0
Status: Bricked with upgrade from 26490
Reset: No/Yes
Errors: After rebooting goes directly to restore mode.
Also the same result with TFTP and flashing from original Netgear Firmware. _________________ Device: Netgear WNDR4300
Firmware: DD-WRT r26490
Back to top
tatsuya46 DD-WRT Guru Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Fri Apr 03, 2015 7:45 Post subject:
grymster wrote: Router Model: Netgear WNDR4300
Browser: Firefox
Version: 37.0.0
Status: Bricked with upgrade from 26490
Reset: No/Yes
Errors: After rebooting goes directly to restore mode.
Also the same result with TFTP and flashing from original Netgear Firmware.
mines fine..corrupt download? _________________LATEST FIRMWARE(S)
BrainSlayer wrote: we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55797 std
[QUALCOMM] DIR-862L --------------------------------> r55797 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std
Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..
Back to top
Snotmann DD-WRT Novice Joined: 14 Mar 2014 Posts: 29
Posted: Fri Apr 03, 2015 8:36 Post subject:
Router: TP-Link WR1043v1
Firmware: 04-01-2015-r26635
Status: Working for a few hours
Reset: no
Errors: Device hang after a couple of hours in repeating (routed) mode since DD-WRT v24-sp2 (06/23/14) std ... ni fix until now ! Last edited by Snotmann on Fri Apr 03, 2015 8:45; edited 1 time in total
Back to top
grymster DD-WRT User Joined: 04 Feb 2011 Posts: 88 Location: SPb, Russia
Posted: Fri Apr 03, 2015 8:44 Post subject:
tatsuya46 wrote:
mines fine..corrupt download?
Did download a few times got the same result.
Had the same issue with --- 26587 --- 03/27/2015 build. _________________ Device: Netgear WNDR4300
Firmware: DD-WRT r26490
Back to top
mgm DD-WRT User Joined: 27 Dec 2013 Posts: 69
Posted: Fri Apr 03, 2015 9:52 Post subject:
R7000 running stable with 26635 since upgrade
I have a syslog event on my ovpn, but i don't know what's this, because I am a novice in this case.
Anyone an Idea whats the problem....
WARNING: Failed running command (--route-up): could not execute external program
happy easter@all
Back to top
cierzo DD-WRT Novice Joined: 28 Aug 2014 Posts: 23
Posted: Fri Apr 03, 2015 9:54 Post subject:
router: netgear wndr4300
reset: no
no problems flashing and working apart from the one posted before:
* Port identification:
Code: root@DD-WRT:~# swconfig dev eth0 show 2>&1 | grep link
enable_eee: ??? pvid: 0 link: port:0 link:up speed:1000baseT full-duplex txflow rxflow Port 1:
enable_eee: 0 pvid: 1 link: port:1 link:downPort 2:
enable_eee: 0 pvid: 1 link: port:2 link:downPort 3:
enable_eee: 0 pvid: 1 link: port:3 link:up speed:100baseT full-duplex txflow rxflow autoPort 4:
enable_eee: 0 pvid: 1 link: port:4 link:up speed:1000baseT full-duplex txflow rxflow autoPort 5:
enable_eee: 0 pvid: 2 link: port:5 link:up speed:1000baseT full-duplex txflow rxflow autoPort 6:
enable_eee: ??? pvid: 0 link: port:6 link:downVLAN 1:
root@DD-WRT:~#
I have connection in ports 1 (1000baseT) and 2 (100baseT) but command shows ports 4 and 3 instead.
(Don't know why swconfig sends output data to stderr instead of stdout)
* Led color do not reflect connection speed.
They lights green at all speeds (in r24160 they lights orange at all speeds)
update
I have noticed that during boot they show different colours:
Port 1 at 1000 Mbps: Solid Green
Port 2 at 100 Mbps: Solig Orange
then both turns off and on again... both flashing green showing lan traffic.
* Error registering trac (http://svn.dd-wrt.com/)
I'm having problems registering to trac in order to open a ticket. The system answers me:
Submission rejected as potential spam
Back to top
deanMKD DD-WRT Novice Joined: 23 Sep 2014 Posts: 32
Posted: Fri Apr 03, 2015 11:08 Post subject:
Do someone issued randomly dropping internet connection after flasing latest build? Every 1-2 hours internet connction randomly droped, show me "Resolving Host" in browser, and after ~20-30 seconds internet is back again. Is this known bug or?
Back to top
mgm DD-WRT User Joined: 27 Dec 2013 Posts: 69
Posted: Fri Apr 03, 2015 12:35 Post subject:
no internet breakt....work fine with R7000
do you have erase nvram before and after flashing ?
Back to top
a1smith DD-WRT Novice Joined: 20 Mar 2011 Posts: 30
Posted: Fri Apr 03, 2015 12:36 Post subject:
Router Model: Netgear WNDR3700v2
Previous version: 26490
Status: OK
Reset: No
Errors: None (read remarks)
Remarks: After updating firmware QoS wasn't working initially. I power cycled router and that fixed it. I did not do factory reset.
I almost always do firmware update without factory reset or the more rigorous 30/30/30. The only glitch I can recall is once, when features were added to the Time Settings, the router time wasn't correct because the timezone wasn't correct; it had the default value.
Back to top