[Malachi]

I bought a used/as is r6200v2 to play with.
I loaded Tathagatas build on it.
I was wondering since its an ARM unit, if I could load one of Kongs arm builds on it, since his seem to work accross multiple platforms including the r6250.
I know this is a single core but I dont know enough as to whether that makes a difference. I am thinking it does but idk. lol
As to the flash size its 128Mb.
I will post some of the info I've got. If more is needed let me know.

Here is the cpu info.


DD-WRT v24-sp2 std (c) 2014 NewMedia-NET GmbH
Release: 10/31/14 (SVN revision: build r24170)

DD-WRT login: root
Password:
==========================================================

____ ___ __ ______ _____ ____ _ _
| _ \| _ \ \ \ / / _ \_ _| __ _|___ \| || |
|| | || ||____\ \ /\ / /| |_) || | \ \ / / __) | || |_
||_| ||_||_____\ V V / | _ < | | \ V / / __/|__ _|
|___/|___/ \_/\_/ |_| \_\|_| \_/ |_____| |_|

DD-WRT v24-sp2
http://www.dd-wrt.com

==========================================================


BusyBox v1.22.1 (2014-10-31 13:08:49 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

root@DD-WRT:~# cat /proc/cpuinfo
model name : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1594.16
Features : swp half thumb fastmult edsp tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0

Hardware : Northstar Prototype
Revision : 0000
Serial : 0000000000000000
root@DD-WRT:~#

[Malachi]

Here is the nvram show and dmesg.

[LOM]

Do you have the original nvram from stock before you polluted nvram with dd-wrt variables/values?

R6200v2 and R6250 are very similar, 6200v2 is a slight hardware downgrade of 6250 and they both uses the same circuit board.

R6200v2 can easily be dd-wrt supported but a stock nvram dump is required.

[Malachi]

I can flash stock back to it and see if telnetEnable is working on it.
Or is it to late since dd-wrt has been flashed?

I have a serial cable on it. Can I get an nvram dump on stock through serial if telnetEnable isn't working on it?

[LOM]

[Malachi]

Thanks LOM. It will have to wait till tomorrow.

[Malachi]

Here you go LOM. Thanks again.

[LOM]

So this is an R6250 but with a single core arm cpu, otherwise the routers are identical.

I have asked Brainslayer to add support for it without the need for a donated router.
It is now listed as WIP in Supported Devices wiki page

[Malachi]

Thank you LOM.

[Malachi]

A few releases since this. I've been keeping an eye out on the timeline but haven't seen anything.
So for people wondering, I wouldn't get your hopes up.

[jonathan1683@yahoo.com]

I will pay 20 for a supported version I already paid for the old verions on my wrt54gl which died. I used the Tathagata Das one, but the access restrictions randomly stopped working and I need to reboot the router every night or it becomes unstable. Also I can't seem to get the virtual interface to work. I can never connect to it I only need it to keep my girls kid from getting online when we he is not suppose to and it's a pain keeping track when he has an ipad ipod and PC. I might just have to fork out and buy a new router.

[Streetmedik]

Do I understand that the R6200v2 is now supported? If so, what do I need to download. I can't see the correct file... Unless I am looking in all the wrong places.

[Xeon2k8]

[Streetmedik]

So, still nothing for the R6200v2. I never seem to pick the right hardware

[Xeon2k8]