QoS on WR941ND with v24-sp2 - Not working

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
View previous topic :: View next topic  
Author Message
Vulisha
DD-WRT Novice


Joined: 15 Jun 2016
Posts: 5
PostPosted: Wed Jun 15, 2016 19:39    Post subject: QoS on WR941ND with v24-sp2 - Not working Reply with quote
Hello,
I wanted to setup QoS on my DD WRT router, since my ISP provides me with only 0.5 mbps UL, and my family is coming soon with milions of androids with auto sync on, so I wanted to limit their UL speed.

TP LINK is connected to main router using WDS

When I set options in QoS nothing happens, tried all options
WAN / LAN and WLAN
HTB / HFSC

I set uplink limit ot 256 kbps

Tried netmask limit, to 192.168.1.200/29 and set my testing device on 192.168.1.201
Tried MAC adress limit, but nothing helps to limit speed Am I doing something wrong or is it only option to limit bandwidth to place router very very far so link speed is low?
Back to top View user's profile Send private message
Sponsor
jwoods
DD-WRT User


Joined: 13 Mar 2016
Posts: 403
PostPosted: Wed Jun 15, 2016 21:00    Post subject: Reply with quote
See this DD-WRT wiki article on QOS...

https://www.dd-wrt.com/wiki/index.php/Quality_of_Service
Back to top View user's profile Send private message
Vulisha
DD-WRT Novice


Joined: 15 Jun 2016
Posts: 5
PostPosted: Wed Jun 15, 2016 22:39    Post subject: Reply with quote
That was the first thing I did

http://prntscr.com/bgvsp3

I think it might be something with WDS or WiFi connection to main router
Back to top View user's profile Send private message
jwoods
DD-WRT User


Joined: 13 Mar 2016
Posts: 403
PostPosted: Wed Jun 15, 2016 22:50    Post subject: Reply with quote
I use WAN, HTB and FQ_CODEL with uplink and downlink set at approximately 95% of maximum.

ACK, SIN, FIN, and RST are checked.

Test at http://www.dslreports.com/speedtest
Back to top View user's profile Send private message
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada
PostPosted: Thu Jun 16, 2016 1:58    Post subject: Reply with quote
use the latest build first.. & our qos isnt that good for uplinks below 1 mbps, especially under 640 kbps.. & no one seems to be looking at it. our previous active qos developer is mostly missing in action now a days..
_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r54248 std
[QUALCOMM] DIR-862L --------------------------------> r54248 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

Back to top View user's profile Send private message
Vulisha
DD-WRT Novice


Joined: 15 Jun 2016
Posts: 5
PostPosted: Thu Jun 16, 2016 12:05    Post subject: Reply with quote
So, my plan to buy powerline and connect TP LINK using lan to main router, would not be so smart plan for QoS?

And regarding last software, I think it is:
http://prntscr.com/bh2wax

I think I will need to tryout OpenWrt Gargoyle, although I prefer DD-WRT much more, but it doesn't give me enough control in Bandwidth :/
Back to top View user's profile Send private message
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1625
Location: Belgrade
PostPosted: Thu Jun 16, 2016 12:53    Post subject: Reply with quote
ftp://ftp.dd-wrt.com/betas/2016/06-06-2016-r29837/
Back to top View user's profile Send private message
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6181
Location: UK, London, just across the river..
PostPosted: Fri Jun 17, 2016 8:24    Post subject: Reply with quote
Vulisha wrote:
So, my plan to buy powerline and connect TP LINK using lan to main router, would not be so smart plan for QoS?

And regarding last software, I think it is:
http://prntscr.com/bh2wax

I think I will need to tryout OpenWrt Gargoyle, although I prefer DD-WRT much more, but it doesn't give me enough control in Bandwidth :/


i don't know, about Open WRT, but Gargoyle QoS works fine, but the firmware is not that stable, as it seems.
Also i got Wi-Fi speed not more than 72Mbit, on my 740nd and 150Mbit on 1043nd v2.
I prefer to run DD-WRT on my main and if you set QoS correctly it does work with Mac interface or general limit
per user Wink
_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 53045 WAP
TP-Link WR1043NDv2 -DD-WRT 54420 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall,VPN,x1VLAN
TP-Link WR1043NDv2 -DD-WRT 54079 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 54420 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 54079 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 54079 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Back to top View user's profile Send private message
Vulisha
DD-WRT Novice


Joined: 15 Jun 2016
Posts: 5
PostPosted: Fri Jun 17, 2016 12:14    Post subject: Reply with quote
I just upgraded, but it is all the same again, it looks like my router simply doesn't support table like this
Back to top View user's profile Send private message
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1625
Location: Belgrade
PostPosted: Fri Jun 17, 2016 12:52    Post subject: Reply with quote
on QoS tab select port LAN&WLAN and try again...
Back to top View user's profile Send private message
Vulisha
DD-WRT Novice


Joined: 15 Jun 2016
Posts: 5
PostPosted: Fri Jun 17, 2016 20:08    Post subject: Reply with quote
No option for LAN WLAN
http://prntscr.com/bho811
No option for WAN
http://prntscr.com/bho8ko
No option for HFSC
http://prntscr.com/bho8v1
Back to top View user's profile Send private message
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7568
Location: YWG, Canada
PostPosted: Fri Jun 17, 2016 20:43    Post subject: Reply with quote
u still havent updated to the latest build, its a must.. old qos was even worse..
_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r54248 std
[QUALCOMM] DIR-862L --------------------------------> r54248 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..

Back to top View user's profile Send private message
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum