New Build - 01/09/2022 - r48068

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 4320

PostPosted: Sun Jan 09, 2022 8:48    Post subject: New Build - 01/09/2022 - r48068 Reply with quote
Welcome to Broadcom r48068 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r47976 (mirror)

OpenVPN 2.5.5: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips and scripts. Thanks BS & egc!

Notes:
Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • TP-Link Archer C8 v2, v3 support.
CoovaChilli, Privoxy, iperf3, CAKE, FreeRADIUS, dnsmasq, Unbound, Squid, Asterisk, SmartDNS, curl, ProFTPD, Tor, BusyBox, OpenSSL, mac80211, MiniDLNA
In-kernel Samba (ksmbd 3.4.3+): guest behavior is now selectable. • WSD updateANTFS/NTFS3 kernel mode driver+++
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 fragattack fixed. • Broadcom swconfig supported.
• 'Assign WAN port to Switch' gone, set Connection Type Disabled. • WebUI MAC Filtering (47184-47205). • Sputnik removed.
• 'Ignore WAN DNS' also ignores WAN domain. • Milkfish removed.
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, see UI theme test info thread.
• 401 bad request: Ethernet WebUI -> Wireless -> Basic Settings -> Advanced Settings -> Wireless GUI Access Enable, Save
Add static or delete DHCP lease from DHCP clients table in Status -> LAN. Upgrades to forwarding delete in NAT / QoS tabs.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
DNScrypt 1.95 can still be used in WebUI but v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
VAPs not working at boot are fixed, both unbridged (r40634) and bridged (r47822). Please test, remove startup commands.
If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
Broadcom ARM devices if 5 GHz channels are missing via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs. Logs: 'dmesg' 'cat /tmp/var/log/messages' syslog klog, serial, strace, tcpdump, wireshark.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Gremlins: reset & configure manually, not restore a backup. Reboot. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 10347
Location: Netherlands

PostPosted: Sun Jan 09, 2022 9:11    Post subject: Reply with quote
Router Model: Netgear R6400v1

Firmware Version: DD-WRT v3.0-r48068M Community Build (01/08/22)
Kernel Version: Linux 4.4.298 #1 SMP Sat Jan 8 21:10:27 CET 2022 armv7l

Upgraded from: DD-WRT v3.0-r47874M Community Build (12/18/21)21)
Reset: No not this time

Status: Up and running for 10 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, DynDNS, 2.4 GHz and 5 GHz.
Running one WireGuard tunnel to Keepsolid and second WireGuard tunnel to own WG server for site-to-site connection.
OpenVPN client tested and working
Disabled "Query DNS in strict order"

Big Thanks to BS and other forum members and developers.

_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 10347
Location: Netherlands

PostPosted: Sun Jan 09, 2022 9:36    Post subject: Reply with quote
Router Model: Netgear R6400v2, board_id: U12H332T

Firmware Version: DD-WRT v3.0-r48068M Community Build (01/08/22)
Kernel Version: Linux 4.4.298 #1 SMP Sat Jan 8 21:10:27 CET 2022 armv7l

Upgraded from: DD-WRT v3.0-r47874M Community Build (12/18/21)21)
Reset: No not this time

Status: Up and running for 10 hours, basic setup as Gateway, static leases, 2,4GHz and 5Ghz working.
USB storage and NAS/SMB working can access via WireGuard and OpenVPN server with Android phone (X-plore) and Windows.
OpenVPN server working.
WireGuard server working with 8 clients (phones , windows and two other routers for site-to-site setup).

Errors: None

Thanks BS!

_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 605

PostPosted: Sun Jan 09, 2022 10:00    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.298 #4924 SMP Sun Jan 9 02:08:47 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r47976 std (01/06/22) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + USB Storage + lighttpd (using Entware's php8) + DDNS (custom) + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2022): https://politepol.com/fd/BU5UpNmf6NRW
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 List of reference threads, how-tos, and otherwise (Moderator's Pick 🌟)
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5895
Location: Texas

PostPosted: Sun Jan 09, 2022 10:02    Post subject: Reply with quote
Linksys E2500 ...used as a simple WAP
DD-WRT v3.0-r48068 mega (01/09/22)
Linux 4.4.298 #13580 Sun Jan 9 13:29:28 +07 2022 mips
'dd-wrt.v24-48068_NEWD-2_K3.x_mega.bin'
GUI install over r47976
all good
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 293
Location: Maine, USA

PostPosted: Sun Jan 09, 2022 13:44    Post subject: Reply with quote
Router/Version: Asus RT-AC66U
File: dd-wrt-#####-Asus_RT-AC66U.trx
Firmware: DD-WRT v3.0-r48068 giga (01/09/22)
Kernel: Linux 4.4.298 #13562 Sun Jan 9 12:56:12 +07 2022 mips
Mode: Gateway
Previous: r47644
Reset?: N
Status: Working
elatllat
DD-WRT Novice


Joined: 20 Feb 2020
Posts: 31

PostPosted: Sun Jan 09, 2022 14:35    Post subject: Reply with quote
Router/Version: Asus RT-AC66U /
File/Kernel: dd-wrt-48068-Asus_RT-AC66U.trx / Linux 4.4.298 #13562 Sun Jan 9 12:56:12 +07 2022 mips
Previous/Reset: v3.0-r47942 / No
Mode/Status: router / OK
Issues/Errors: No / No
itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 194

PostPosted: Sun Jan 09, 2022 15:36    Post subject: Reply with quote
Router Model: Netgear R7000P
Firmware Version: DD-WRT v3.0-r48068 std (01/09/22)
Kernel Version: Linux 4.4.298 #4930 SMP Sun Jan 9 02:42:01 +07 2022 armv7l
Reset: no
Operating Mode/Setup: Gateway / AP Unbound JFFS2
Status: issue with JFFS2. it isnt starting like normal.


Last edited by itwontbewe on Thu Feb 10, 2022 15:48; edited 1 time in total
saphirely
DD-WRT User


Joined: 13 Dec 2020
Posts: 201

PostPosted: Sun Jan 09, 2022 16:16    Post subject: Reply with quote
Router/Version: Netgear R6250
Firmware: DD-WRT v3.0-r48068 std (01/09/22)
Kernel: Linux 4.4.298 #4924 SMP Sun Jan 9 02:08:47 +07 2022 armv7l
Mode: Gateway, Wireless AP, unbound, CTF & FA Enabled. NAT/QoS Off
Reset: No
Previous : DD-WRT v3.0-r47976 std (01/06/22)
Upgrade: CUI
Temperatures CPU 79.1 °C / WL0 50.3 schedule start/stop /WL1 56.5 schedule start/stop
Load: 0.01, 0.04, 0.01
Uptime 1/4 hour

Works well. unbound works on internal jffs very well.
PaulGo
DD-WRT User


Joined: 01 Dec 2021
Posts: 171
Location: Maryland, United States

PostPosted: Sun Jan 09, 2022 18:31    Post subject: Reply with quote
Router/Version: Netgear R6300v1
Firmware: DD-WRT v3.0-r48068 giga (01/09/22)
File/Kernel: Linux 4.4.298 #13562 Sun Jan 9 12:56:12 +07 2022 mips
Previous/Reset: r47976 No reset
Mode/Status: Gateway / Working
Issues/Errors: None except IPv6.


The IPv6 issue has been posted in another post on this thread. The router cannot get a WAN IPv6 address.

I decided to try CTF instead of SFE and my internet speed increased from about 420Mbps to 720Mbps.


Last edited by PaulGo on Sat Feb 19, 2022 21:09; edited 2 times in total
wabe
DD-WRT Guru


Joined: 17 Jun 2006
Posts: 837

PostPosted: Sun Jan 09, 2022 23:16    Post subject: Reply with quote
Router Model: Netgear R7000
Firmware Version: DD-WRT v3.0-r48068 std (01/09/22)
Kernel Version: Linux 4.4.298 #4930 SMP Sun Jan 9 02:42:01 +07 2022 armv7l
Reset: no
Operating Mode/Setup: Gateway / AP
Status: Works well in general but smartdns does not read custom configuration from /jffs/etc now. Worked fine up until build 47976. Samba does not work, no access from MacOs at least. Haven't tried Samba access in a while, works on 47618 but not on 47976 or on this build.
Also log contains this, new, message:
Code:
 Jan 9 23:42:31 Guardian1 user.err : [flash] : Could not unlock MTD device: ddwrt

_________________
Netgear R7000 on Build 50172
Asus AC-AC68U rev. C1 on Build 50172
Asus AC-68U rev. A1 on Build 50172
Asus AC-68U rev. A1 on Build 49976
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum