-a few visual tweaks for the webif
-display used/avail drive space for mounted partitions
-dropbear update
-minidlna update 1.1.4
-php update
-netfilter extension for ipv6
-link to lighttd server in webif
Fixed:
-radiusd libssl issue
-stp handling
-a few musl fixes
-ip6tunnel fixes
-weburl filter disabled state for last two rows
Updated my R7000 with ddup in local mode. Went smoothly. I did have to reset the 2.4g channel from auto back to assigned. YAMon running.
I'll wait to see HW NAT thing addressed and the newest Broadcom driver's used. _________________ Jim
Netgear R7000
Kong's 24800M OC to 1200,800
Previously:
Asus RT-N66U
Linksys E3000
Linksys WRT54GS Version 2.1
Buffalo WHR-HP-G54
Linksys WRT54G Version 1.1
This is tempting to try, but I suspect from the fix list that IPv6 is still broken for me on Comcast.
My problem with IPv6 on dd-wrt is that when I power-cycle or reboot my router, after it comes back up I don't have an internet connection if IPv6 is enabled. Doesn't happen either on stock firmware or tomato, so I'm hoping that it's just a matter of time until this problem is fixed *smile*.
Don't care if NW NAT works or not *smile*, doesn't affect me one way or the other. As long as I can turn it off if it's not working right yet.
This is tempting to try, but I suspect from the fix list that IPv6 is still broken for me on Comcast.
My problem with IPv6 on dd-wrt is that when I power-cycle or reboot my router, after it comes back up I don't have an internet connection if IPv6 is enabled. Doesn't happen either on stock firmware or tomato, so I'm hoping that it's just a matter of time until this problem is fixed *smile*.
Don't care if NW NAT works or not *smile*, doesn't affect me one way or the other. As long as I can turn it off if it's not working right yet.
Then we need some debug info, e.g., iptables rules, routes, ifconfig output etc., but you should try with latest, _________________ KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
Installed on a RT-AC68R and everything seems to be working smoothly. Enabled HW NAT and WOL works from both the LAN side and the Internet. Thanks for the build Kong. _________________ Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridge
Netgear R6400v2otp
This is tempting to try, but I suspect from the fix list that IPv6 is still broken for me on Comcast.
My problem with IPv6 on dd-wrt is that when I power-cycle or reboot my router, after it comes back up I don't have an internet connection if IPv6 is enabled. Doesn't happen either on stock firmware or tomato, so I'm hoping that it's just a matter of time until this problem is fixed *smile*.
Don't care if NW NAT works or not *smile*, doesn't affect me one way or the other. As long as I can turn it off if it's not working right yet.
Then we need some debug info, e.g., iptables rules, routes, ifconfig output etc., but you should try with latest,
Okay, makes sense. I'm currently using tomato, will flash to latest dd-wrt *smile*. I'll be glad to supply debugging information.