Posted: Mon Jul 28, 2014 14:42 Post subject: Kong - R6300 V1 stopped at rev 24200?
Kong,
I've been watching for updates to the firmware for the R6300-V1 and they appear to have stopped at 24200M while the updates for the R6300-V2 have continued (now at 24710.)
the cause is, it is more complicated to build a mipsel image ( different toolchain , and whatever, too ).
Kong will realse a new build soon, but not that frequent than for ARM SoC´s _________________ RT-N66U @ Build 25697M K3.10.63
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
the cause is, it is more complicated to build a mipsel image ( different toolchain , and whatever, too ).
Kong will realse a new build soon, but not that frequent than for ARM SoC´s
Thanks, I'm considering getting a new router and if builds for the R6300-V1 had stopped then that might have hastened my decision. I've had my eye on the R7000 since that's the router Kong seems to be using.
well, Kong is now DD-WRT Dev, so most of his code will be in regular builds, too. and as i said, new mipsel KongAC builds will come out, but not that fast. _________________ RT-N66U @ Build 25697M K3.10.63
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
well, Kong is now DD-WRT Dev, so most of his code will be in regular builds, too. and as i said, new mipsel KongAC builds will come out, but not that fast.
Right, I knew that. But my current router and the R7000/AC1900 are not listed in the official DD-WRT database of supported routers. Which is why I have been continuing to go to his signature links for updates.
its outdated, never use it. use wiki link with supported devices instead _________________ RT-N66U @ Build 25697M K3.10.63
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
