Posted: Wed Jul 08, 2020 16:43 Post subject: New Build - 07/08/2020 - r43711
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Notes:
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
• In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• VAP issue is fixed! For any Wireless Mode, create a VAP and both ath0/ath1 should now function properly.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WireGuard 1.0.20200623: PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!
• Buffalo WHR-600D upgrade from r24461 now fully supported. REFs: Internal testing, 43638, 43640, 43641, and here
Issues:
• There may be remaining issues for Samba (for example NTFS), with frequent updates.
Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.
Encountered problem with 5GHz WiFi. Initially 5GHz would take a couple? minutes to start working, then appeared to work fine. However, after a few minutes of non-use, signal strength was excellent on Android device but device failed to open any webpage. No issues with 2.4GHz
Reverted to 04-20-2020-r42954 release.
Last edited by casualtester on Wed Jul 08, 2020 20:55; edited 5 times in total
Joined: 08 May 2018 Posts: 14125 Location: Texas, USA
Posted: Wed Jul 08, 2020 19:43 Post subject:
Router: Buffalo WHR-600D
File: buffalo_whr_600d-webflash.bin
Firmware: DD-WRT v3.0-r43711 std (07/08/20)
Kernel: Linux 3.10.108-d10 #8008 Wed Jul 8 17:34:58 +04 2020 mips
Previous: (r24461) by way of a few test images
Reset: No
Mode: Gateway|AP
Uptime: ~4hrs
Issues/Errors: None for basic configuration. Both radios working as expected. Users can now flash this build from 24461 without issue and upgrade finally, after 6 years of not being able to. Fruit of efforts coordinated thanks to a forum post and working with BrainSlayer on testing firmware images. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Joined: 08 May 2018 Posts: 14125 Location: Texas, USA
Posted: Thu Jul 09, 2020 2:37 Post subject:
Yes; several, if not most Ralink/MediaTek devices were given an 80211mac wireless driver massage, so the settings were all reset. I just didn't remember a specific list of devices to add to the notes for the OP _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net