Posted: Fri Feb 13, 2015 14:07 Post subject: Network redundency
I use multiple internet sources for redundency. However I have to manually change the IP addresses on my computer to change the internet source. I am looking if this can be automated?
My setup is as follows
DDWRT Client Bridge (192.168.0.254)========== Wireless connection to an internet source (192.168.1.x)
Nanostation (192.168.0.20) ============= Wireless connection to another internet source (192.168.1.x)
Main ADSL router (192.168.0.1)========== Connected to ADSL and is a wireless access point for devices
The main ADSL router is a dumb Linksys router which i just use as an access point. I want this setup to seemlessly switch to another internet source in case of failover of one. Can you please guide me how can i do this?[img][/img]
The client Bridge router (192.168.0.254) is connected to another network (192.168.1.0), located in another building, via the client bridge wireless interface. I need to be able to ping the 192.168.1.0 network from my PC (192.168.0.100). I don't want to give DDWRT client bridge (192.168.0.254) router an IP on the (192.168.1.0) network. I have set the subnet to 255.255.252.0 on the DDWRT Client bridge (192.168.0.254) router and also 255.255.252.0 on my computer. But i still cannot ping the 192.168.1.0 network from my 192.168.0.0 network
PC(192.168.0.100) --- Router (192.168.0.254/255.255.252.0)--- Other network (192.168.1.0)
