Cfe collection project -See Pg 9 for FTP server info

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3 ... 8, 9, 10 ... 20, 21, 22  Next
Author Message
juched
DD-WRT Novice


Joined: 18 Jun 2009
Posts: 34

PostPosted: Sat Jun 20, 2009 15:31    Post subject: Linksys WRT300n V1.1 Reply with quote
Linksys WRT300n V1.1

CPU Model
Broadcom BCM4785 chip rev 2
CPU Clock
300 MHz



WRT300Nv11-cfe.bin
 Description:
Linksys WRT300n V1.1

Download
 Filename:  WRT300Nv11-cfe.bin
 Filesize:  256 KB
 Downloaded:  1098 Time(s)

Sponsor
roytam1
DD-WRT Novice


Joined: 01 Aug 2006
Posts: 14

PostPosted: Sun Jun 21, 2009 10:13    Post subject: Reply with quote
WRT54G v5 CFE
get from cat /dev/mtd/0 > /tmp/www/cfe.bin
Firmware: DD-WRT v23 SP3 (03/04/07) micro, don't have time testing for v24 SP1.

EDIT: It should be a v5 device, sorry for any inconvenience caused.



cfe.bin
 Description:
WRT54G v5 CFE

Download
 Filename:  cfe.bin
 Filesize:  256 KB
 Downloaded:  1181 Time(s)



Last edited by roytam1 on Sun Aug 02, 2009 9:46; edited 2 times in total
prairiedog6791
DD-WRT Novice


Joined: 24 Jun 2009
Posts: 1

PostPosted: Wed Jun 24, 2009 22:04    Post subject: cfe.bin for wrt54gs v1 Reply with quote
Hi All,

I desperately need a cfe for this router; none from the various websites or cfe generators have worked properly.

If anyone knows a good repo of these or could send it to me I'd be most grateful...I see that Pandora-Box sent in one for this same model.

When I get this router going again I'll retrieve bootloaders from my other routers and post them too!

-Mike
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11430
Location: Wherever the wind blows- North America

PostPosted: Thu Jun 25, 2009 15:04    Post subject: Re: cfe.bin for wrt54gs v1 Reply with quote
prairiedog6791 wrote:
Hi All,

I desperately need a cfe for this router; none from the various websites or cfe generators have worked properly.

If anyone knows a good repo of these or could send it to me I'd be most grateful...I see that Pandora-Box sent in one for this same model.

When I get this router going again I'll retrieve bootloaders from my other routers and post them too!

-Mike


Send me a PM with your MAC....I have a known good CFE for the GSv1.0

redhawk

_________________
Donations have dwindled so testing is limited to C/CB and R/RB modes on just a few newer models. No old router testing performed any longer.

Looking for more test units (newer models only) for the project...got a brick?...PM me to make a hardware donation. (USA) A donation is not a debricking service....it is a way to "Give back" to the dd-wrt project.

I do NOT provide personal assistance through chat or phone....so please don't ask.
HuKuToC
DD-WRT Novice


Joined: 19 Jun 2009
Posts: 4

PostPosted: Sun Jun 28, 2009 20:05    Post subject: Reply with quote
D Link Dir-320
FCC ID:KA2DIR320A1
GUI back up CFE (via http)
Sorry, the rest is unknown for me



cfe.bin
 Description:
CFE DLink Dir320

Download
 Filename:  cfe.bin
 Filesize:  256 KB
 Downloaded:  897 Time(s)

uberushaximus
DD-WRT Novice


Joined: 07 Jul 2009
Posts: 13

PostPosted: Wed Jul 08, 2009 17:38    Post subject: WRT310n Cfe Reply with quote
I ripped this via SCP from a WRT310n (v1.0)
The FCCID is 087-WRT310N, cheers.



cfe.bin
 Description:
WRT310n

Download
 Filename:  cfe.bin
 Filesize:  256 KB
 Downloaded:  1085 Time(s)

ddggttff3
DD-WRT User


Joined: 06 Mar 2009
Posts: 107
Location: MinneSOTA!

PostPosted: Sun Jul 26, 2009 18:37    Post subject: Reply with quote
emailed in my CFE, and info. its for a WRT310N V1
X-TraxxX
DD-WRT User


Joined: 15 Mar 2007
Posts: 65

PostPosted: Wed Jul 29, 2009 6:14    Post subject: Reply with quote
roytam1 wrote:
WRT54G v6 CFE
get from cat /dev/mtd/0 > /tmp/www/cfe.bin
Firmware: DD-WRT v23 SP3 (03/04/07) micro, don't have time testing for v24 SP1.


Should the same Firmware version be used to aid in the recovery of a bricked wrt54g v6 when using this CFE?
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11430
Location: Wherever the wind blows- North America

PostPosted: Wed Jul 29, 2009 11:58    Post subject: Reply with quote
X-TraxxX wrote:
roytam1 wrote:
WRT54G v6 CFE
get from cat /dev/mtd/0 > /tmp/www/cfe.bin
Firmware: DD-WRT v23 SP3 (03/04/07) micro, don't have time testing for v24 SP1.


Should the same Firmware version be used to aid in the recovery of a bricked wrt54g v6 when using this CFE?


No...the CFE is untouched by the FW...if you use TJTAG to flash the CFE onto the v6...you can flash any FW version of micro using tftp.

redhawk

_________________
Donations have dwindled so testing is limited to C/CB and R/RB modes on just a few newer models. No old router testing performed any longer.

Looking for more test units (newer models only) for the project...got a brick?...PM me to make a hardware donation. (USA) A donation is not a debricking service....it is a way to "Give back" to the dd-wrt project.

I do NOT provide personal assistance through chat or phone....so please don't ask.
flowersrj
DD-WRT Novice


Joined: 03 Apr 2009
Posts: 48

PostPosted: Sun Aug 02, 2009 15:00    Post subject: Reply with quote
Happy to contribute ...

Asus Wl-500gP v1
Broadcom BCM4704 chip rev 9
v24-sp2 voip build 12533



cfe.bin
 Description:

Download
 Filename:  cfe.bin
 Filesize:  256 KB
 Downloaded:  879 Time(s)

3xpl0it
DD-WRT User


Joined: 26 Jul 2008
Posts: 74

PostPosted: Thu Aug 06, 2009 0:00    Post subject: Reply with quote
Could someone please post up a working CFE of a WRT64GS Ver. 6

Many thanks in advance!
-3xpl0it
DHC_DarkShadow
DD-WRT Guru


Joined: 22 Jun 2008
Posts: 2440
Location: Am now Dark_Shadow

PostPosted: Thu Aug 06, 2009 0:28    Post subject: Reply with quote
3xpl0it wrote:
Could someone please post up a working CFE of a WRT64GS Ver. 6

Many thanks in advance!
-3xpl0it


Yes I am interested too. I have all the posted cfe and wholeflash that are able to be downloaded and plan on trying to make a wiki page, and this is one of the one's I don't have yet.

_________________
The New Me
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13019
Location: Behind The Reset Button

PostPosted: Thu Aug 06, 2009 14:20    Post subject: Wrt54GS V6 CFE Reply with quote
wrt54gS v6 cfe
_________________
[Moderator Deleted] Shocked
DHC_DarkShadow
DD-WRT Guru


Joined: 22 Jun 2008
Posts: 2440
Location: Am now Dark_Shadow

PostPosted: Thu Aug 06, 2009 14:37    Post subject: Reply with quote
Request WRT610N CFE v.12 and v.16
_________________
The New Me
DHC_DarkShadow
DD-WRT Guru


Joined: 22 Jun 2008
Posts: 2440
Location: Am now Dark_Shadow

PostPosted: Thu Aug 06, 2009 20:37    Post subject: Reply with quote
barryware wrote:
DHC_DarkShadow wrote:
CFE's or wholeflash's can be emailed to me at
email=dd-wrt@darkhaven.org


I made a folder called new_uploads. If someone just wants to upload a cfe instead of e-mailing it.

Uploads should go there. Then someone can change the macs to generics (DHC Razz ), then file them in the proper place.

So... DD-WRT'sters.. upload your cfe's and they will be checked, macs changed to generic and filed in the correct folder.

If you need a cfe and have a linksys, you need to look in the linksys folder Shocked

url=ftp://ftp.barryware.net
username = dd-wrt
password = router


All Mac's will be changed to generic when possible.

_________________
The New Me
Goto page Previous  1, 2, 3 ... 8, 9, 10 ... 20, 21, 22  Next Display posts from previous:    Page 9 of 22
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum