Cfe collection project -See Pg 9 for FTP server info

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3 ... 5, 6, 7 ... 20, 21, 22  Next
Author Message
oxceed
DD-WRT Novice


Joined: 16 Oct 2008
Posts: 4

PostPosted: Thu Oct 16, 2008 5:22    Post subject: Reply with quote
i want cfe.bin to paradyne 6211-i2 proc broadcom6338
flash mx29lv320b from jtag please

=======================================
ST5xx/780 EJTAG Debrick Utility v1.1
This Utility was changed from WRT54G to
work correctly with Speedtouch Routers
=======================================

Probing bus ... Done

Instruction Length set to 5

CPU Chip ID: 00000110001100111000000101111111 (0633817F)
*** Found a Broadcom BCM6338 Rev 1 CPU chip ***

- EJTAG IMPCODE ....... : 00000000100000000000100100000100 (00800904)
- EJTAG Version ....... : 1 or 2.0
- EJTAG DMA Support ... : Yes

Issuing Processor / Peripheral Reset ... Done
Enabling Memory Writes ... Done
Halting Processor ... <Processor Entered Debug Mode!> ... Done
Clearing Watchdog ... Done

Probing Flash at (Flash Window: 0x1fc00000) ... Done

Flash Vendor ID: 00000000000000000000000011000010 (000000C2)
Flash Device ID: 00000000000000000010001010101000 (000022A8)
*** Found a MX29LV320B 2Mx16 BotB (4MB) Flash Chip ***

- Flash Chip Window Start .... : 1fc00000
- Flash Chip Window Length ... : 00400000
- Selected Area Start ........ : 00000000
- Selected Area Length ....... : 00000000



*** REQUESTED OPERATION IS COMPLETE ***



.JPG
 Description:
 Filesize:  829.13 KB
 Viewed:  52464 Time(s)

.JPG


Sponsor
nitrous
DD-WRT Novice


Joined: 11 Nov 2008
Posts: 1

PostPosted: Tue Nov 11, 2008 23:40    Post subject: Reply with quote
all from am604g
cfe
kernel
nvram
wholeflash

mac address F1:F2:F3:F4:F5:F6



am604g.rar
 Description:

Download
 Filename:  am604g.rar
 Filesize:  5.73 MB
 Downloaded:  2465 Time(s)

Doffo
DD-WRT Novice


Joined: 13 Nov 2008
Posts: 33

PostPosted: Mon Nov 17, 2008 3:03    Post subject: WRT54GS v2 Reply with quote
This here is a modified CFE.BIN where boot_wait is on and some other option im not sure of, but it works GREAT on my WRT54GSv2...

Also, this is the CFE.BIN which I changed the
sdram_init=0x000b

to

sdram_init=0x010b

The reason for this is cause some GS models will
"brick" the second you hit reset to factory defaults.

ENJOY!-=-=-



CFE.bin
 Description:
WRT54GS v2 w/boot_wait on + sdram_init=0x010b

Download
 Filename:  CFE.bin
 Filesize:  256 KB
 Downloaded:  2734 Time(s)

santu
DD-WRT Novice


Joined: 30 Sep 2008
Posts: 4

PostPosted: Fri Nov 21, 2008 22:38    Post subject: Reply with quote
I need to find one for a linksys wrt54gs v3
Edit: using the skynet creator do you need the mac address of a similar router or does it matter? (got mad destroyed original case)


Scratch that I used the skynet utility and a mac of all 0 and that worked



CFE.BIN
 Description:
Linksys Wrt54gs V3 CFE.Bin

Download
 Filename:  CFE.BIN
 Filesize:  256 KB
 Downloaded:  2470 Time(s)

dread22
DD-WRT Novice


Joined: 30 Nov 2008
Posts: 13

PostPosted: Tue Dec 30, 2008 21:56    Post subject: Reply with quote
Requesting CFE for linksys 160n v1
mototun
DD-WRT Novice


Joined: 15 Dec 2008
Posts: 9

PostPosted: Sat Jan 03, 2009 7:48    Post subject: Netgear DG834GTB german version Reply with quote
via JTAG


WHOLEFLASH.BIN.rar
 Description:

Download
 Filename:  WHOLEFLASH.BIN.rar
 Filesize:  3.15 MB
 Downloaded:  2012 Time(s)


CFE.BIN.rar
 Description:

Download
 Filename:  CFE.BIN.rar
 Filesize:  224.79 KB
 Downloaded:  1908 Time(s)

domi-germany
DD-WRT Novice


Joined: 28 Jan 2009
Posts: 10

PostPosted: Wed Jan 28, 2009 20:35    Post subject: Request for WGR614L Reply with quote
hi
i need the cfe from WGR614v8/L EU verison
pls post it
Thanks

dominic
ns2397
DD-WRT Novice


Joined: 12 Oct 2008
Posts: 18

PostPosted: Sat Jan 31, 2009 1:56    Post subject: Reply with quote
Anyone can post
WRT350N ver.1
THanks.
AlwaysConnected
DD-WRT User


Joined: 08 Nov 2006
Posts: 113
Location: NL

PostPosted: Sun Feb 01, 2009 13:47    Post subject: Reply with quote
LINKSYS WRT54GL WRT54G-TM
With DDWRT mega

its cfe with ddwrt



cfe.bin
 Description:

Download
 Filename:  cfe.bin
 Filesize:  256 KB
 Downloaded:  2182 Time(s)


_________________
___________________________________
WRT54GL v1.1 WRT54G-TM Firmware: DD-WRT v24-sp2 (02/03/10) big - build 13832


Last edited by AlwaysConnected on Sun Feb 01, 2009 18:47; edited 1 time in total
Shawn360
DD-WRT Guru


Joined: 26 Jul 2008
Posts: 1237

PostPosted: Sun Feb 01, 2009 17:26    Post subject: Reply with quote
ns2397 wrote:
Anyone can post
WRT350N ver.1
THanks.


http://www.dd-wrt.com/phpBB2/viewtopic.php?p=140487#140487
beltway
DD-WRT Novice


Joined: 03 Jan 2009
Posts: 8

PostPosted: Wed Feb 04, 2009 15:43    Post subject: Reply with quote
Emailed CFE.bin (from GUI) for:

WRT600N v1.1
Running 11483M NEWD Eko



600N-v1.1-cfe.bin
 Description:

Download
 Filename:  600N-v1.1-cfe.bin
 Filesize:  256 KB
 Downloaded:  1713 Time(s)

huclbuck
DD-WRT Novice


Joined: 19 Jan 2008
Posts: 8

PostPosted: Tue Feb 17, 2009 3:30    Post subject: WRT54GS ver 7 Reply with quote
Hello, I need this cfe.bin file, WRT54GS ver 7
Thanks
Shawn360
DD-WRT Guru


Joined: 26 Jul 2008
Posts: 1237

PostPosted: Tue Feb 17, 2009 4:24    Post subject: Re: WRT54GS ver 7 Reply with quote
huclbuck wrote:
Hello, I need this cfe.bin file, WRT54GS ver 7
Thanks

http://www.dd-wrt.com/phpBB2/viewtopic.php?p=154742#154742
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11478
Location: Wherever the wind blows- North America

PostPosted: Thu Feb 19, 2009 17:26    Post subject: Reply with quote
CFE from a WRTSL54GS unit. (MAC address has been made generic)

Extracted using gui backup method.

redhawk



cfe_WRTSL54GS.bin
 Description:
WRTSL54GS

Download
 Filename:  cfe_WRTSL54GS.bin
 Filesize:  256 KB
 Downloaded:  2097 Time(s)


_________________
I do NOT provide personal assistance through chat or phone....so please don't ask.
Bust3D
DD-WRT Novice


Joined: 16 Feb 2009
Posts: 15

PostPosted: Fri Feb 20, 2009 18:19    Post subject: WRT54G V8 still Bricked. Reply with quote
Hi all.
I have WRT54G V8 Bricked.
All lan and wan leds lighting continously.
I made the jtag interface, programmed with CFE,BSP,WHOLEFLASH all i found on forums and to
make compare i backup all after flash and all
backups was same what i flashed with.
So, it's working jtag cause it's flashing with correct content. Can anybody help me unbrick this device ?
PS.
After all flash procedures the leds are still lighting. (ON).
I have Samsung Flash k8d1716ubc.
Goto page Previous  1, 2, 3 ... 5, 6, 7 ... 20, 21, 22  Next Display posts from previous:    Page 6 of 22
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum