E2500 V3 Working Bin Page-3

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next
Author Message
LRC1962
DD-WRT Novice


Joined: 04 Dec 2012
Posts: 14

PostPosted: Fri May 09, 2014 23:08    Post subject: Reply with quote
Hot diggity dog. It works.
Only issue I have is that Although I am connected I seem to have some wrong setting that is blocking wireless from the internet. Home network is working fine.is Anything hardwired is connected to the internet. That tells me I have some setting for wireless that is not right.
Sponsor
Fractal
DD-WRT Guru


Joined: 19 Apr 2010
Posts: 1243

PostPosted: Fri May 09, 2014 23:45    Post subject: Reply with quote
LRC1962 wrote:
Hot diggity dog. It works.
Only issue I have is that Although I am connected I seem to have some wrong setting that is blocking wireless from the internet. Home network is working fine.is Anything hardwired is connected to the internet. That tells me I have some setting for wireless that is not right.


You are half way there, now you need to flash the proper K3x build you wish to use, it is in my post as well.. The build I posted gets DD-WRT on your device, then you can upgrade to newer firmware where the wireless works.

-Fractal
LRC1962
DD-WRT Novice


Joined: 04 Dec 2012
Posts: 14

PostPosted: Sat May 10, 2014 14:17    Post subject: Reply with quote
Here are 3 screen shots of wireless settings plus proof that wireless is working, that might effect things. BTW did not include any mac/IP filtering as I have none of that.
DO have K3 installed.



DD-WRT3.jpg
 Description:
 Filesize:  165.48 KB
 Viewed:  29677 Time(s)

DD-WRT3.jpg



DD-WRT2.jpg
 Description:
 Filesize:  195.61 KB
 Viewed:  29677 Time(s)

DD-WRT2.jpg



DD-WRT1.jpg
 Description:
 Filesize:  187.77 KB
 Viewed:  29677 Time(s)

DD-WRT1.jpg


LRC1962
DD-WRT Novice


Joined: 04 Dec 2012
Posts: 14

PostPosted: Sun May 11, 2014 1:49    Post subject: Found the REAL problem Reply with quote
As I have been posting I found problems getting onto the internet via wifi. What I am using is an Android tablet (linux based OS). Today I tried to get my new computer running on a USB Linux distro. Guess what I found. Could not get access to the internet. Therefore I am changing my original problem from a wifi issue to an issue of it blocking Linux based OS produces. (Have not tested wifi windows yet as I do not have one available.)
I do know that Windows uses traffic now differently then Linux, so is there something I have setup wrong that is blocking Linux traffic?
Again I can ping Google from my PC (ethernet), but can not do anything else.
LRC1962
DD-WRT Novice


Joined: 04 Dec 2012
Posts: 14

PostPosted: Sun May 11, 2014 2:06    Post subject: Reply with quote
Found the trouble. Toggled SPI firewall for some stupid reason. except that did not effect Windows at all, just Linux OSs in my case.
Edit. PC which is ethernet, is still having trouble when running Linux. Is there another firewall function I may have running that is causing this trouble?
Edit-Edit: Tablet caught the router on a reboot.
If Tablet catches router at the right time on a reboot it can grab a page.


Last edited by LRC1962 on Sun May 11, 2014 3:06; edited 2 times in total
LRC1962
DD-WRT Novice


Joined: 04 Dec 2012
Posts: 14

PostPosted: Sun May 11, 2014 2:43    Post subject: Reply with quote
Could I use NAT to open a channel for the PC? An if so, how would I set it up (never used it before)? Would I have to set up something on the PC to make it work also?
tamasbarcsi
DD-WRT Novice


Joined: 11 May 2014
Posts: 1

PostPosted: Sun May 11, 2014 7:29    Post subject: PPPOE Problem Reply with quote
Hi,

Yesterday I upgraded my Linksys E2500 V3 router to ddwrt firmware. I read everything from here: http://dd-wrt.com/phpBB2/viewtopic.php?t=257957&postdays=0&postorder=asc&highlight=e2500&start=30&sid=9a058b5c84c97e186ccf00d8bd5cb5f7

Before using ddwrt I was able to connect to my Internet cable modem via PPPOE connection. After upgrading to ddwrt I can't use PPPOE. My router can't connect. No errors, just seeing "Disconnected". I've tried to connect manualy, same error.

I've tried to use an other router between my computer and the cable modem with PPPOE, it works. DDWRT does not. Sad

Now, I use my Internet with 2 routers. First router, without ddwrt connects with PPPOE, and the second router gets a DHCP internal IP address from the first router. My second router is the Linksys E2500 V3. It works now, but I want to use only the Linksys router with ddwrt.

Can you help me?

I've already do the 30/30/30, factory reset, unplug-replug everything, pressed reset button. Everything.
LRC1962
DD-WRT Novice


Joined: 04 Dec 2012
Posts: 14

PostPosted: Sun May 11, 2014 20:09    Post subject: Reply with quote
I think I have it finally figured out.
As you may see in my image I have to toggle NAT to use the VPN service. That is all the instructions given.
So I quite sure I need something else to get my Linux OS systems that I have to be able to work.
I have no knowledge as far as what to do, and many things that I have read contradict each other. Which makes things very difficult for a n00b.



DD-WRT4.jpg
 Description:
 Filesize:  28.58 KB
 Viewed:  29540 Time(s)

DD-WRT4.jpg


LRC1962
DD-WRT Novice


Joined: 04 Dec 2012
Posts: 14

PostPosted: Thu May 15, 2014 4:45    Post subject: Reply with quote
My issue with openvpn and linux machines was what the vpn site calls leaking dns and placing the dns proxy solved it for me.
The 2 paragraphs talking about it seem to say it was probably no big deal never talking about android or linux os devices. So never crossed my mind. Live and learn (hopefully remembering it next time)
christian0815
DD-WRT Novice


Joined: 13 Aug 2014
Posts: 1

PostPosted: Wed Aug 13, 2014 7:50    Post subject: Reply with quote
Hello,

don't know, but the link to Fractal Builds is always asking for a user and password.

ftp://ftp.basmaf.com/Fractal_Builds/E2500-V3/dd-wrt.v24-23569_NEWD-2_K2.6_mini-e2500V3.bin

I need urgent an initial flash image for v3 Smile
If anyone can help me out, that would be marvelous!
[/url]
btamxx
DD-WRT Novice


Joined: 06 Oct 2014
Posts: 1

PostPosted: Tue Oct 07, 2014 0:08    Post subject: dd-wrt on e2500 V2 for 802.11N ever? Reply with quote
Thanks for the build for V3. However, I have a V2 and tried for hours following instructions on getting N to work to no avail. After spending hours searching the site, I finally found a small paragraph explaining the dd-wrt does not work on e2500 due to lack of USB drivers.

So now, do you ever expect to get a version that will work on e2500 v2? Thanks, Bill
Malachi
DD-WRT Guru


Joined: 17 Jul 2012
Posts: 7209
Location: Columbus, Ohio

PostPosted: Tue Oct 07, 2014 0:49    Post subject: Re: dd-wrt on e2500 V2 for 802.11N ever? Reply with quote
btamxx wrote:
Thanks for the build for V3. However, I have a V2 and tried for hours following instructions on getting N to work to no avail. After spending hours searching the site, I finally found a small paragraph explaining the dd-wrt does not work on e2500 due to lack of USB drivers.

So now, do you ever expect to get a version that will work on e2500 v2? Thanks, Bill


N works but on the 2.4ghz radio. The 5ghz will not get supported according to Brainslayer.

_________________
I am far from a guru, I'm barely a novice.
ciscodlink
DD-WRT User


Joined: 13 May 2014
Posts: 273

PostPosted: Wed Oct 15, 2014 6:12    Post subject: Reply with quote
Can someone upload a copy of the Fractal's patch to a nonFTP host current link times out for me.
kisslo
DD-WRT Novice


Joined: 15 Oct 2014
Posts: 2

PostPosted: Wed Oct 15, 2014 10:28    Post subject: Reply with quote
ciscodlink wrote:
Can someone upload a copy of the Fractal's patch to a nonFTP host current link times out for me.


Same for me, link times out
ciscodlink
DD-WRT User


Joined: 13 May 2014
Posts: 273

PostPosted: Thu Oct 16, 2014 17:23    Post subject: Reply with quote
Found a mirror


dd-wrt.v24-23569_NEWD-2_K2.6_mini-e2500V3.bin
 Description:

Download
 Filename:  dd-wrt.v24-23569_NEWD-2_K2.6_mini-e2500V3.bin
 Filesize:  3.4 MB
 Downloaded:  15484 Time(s)

Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next Display posts from previous:    Page 3 of 8
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum