E2500 V3 Working Bin Page-4

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8
Author Message
Malachi
DD-WRT Guru


Joined: 17 Jul 2012
Posts: 7221
Location: Columbus, Ohio

PostPosted: Sat Feb 04, 2017 0:16    Post subject: Re: Help with upgrade firmware after v24-sp2 Reply with quote
Shadowven wrote:
I need some help...
I have an E2500 v3 with DDWR v24-sp2(05/19/15) from Fractal. I upgraded flash with tomato-E2500v3USB-NVRAM60K-1.28.AT-RT-N5x-MIPSR2-3.4-138-MEGA-VPN.bin from https://advancedtomato.com/downloads/router/e2500v3

The flash said it was successful and I waited approx. 5 minutes.. I then did a 30/30/30 Reset and reconnected to router Gui. Apparently it didn't take flash because it still showing DDWRT gui with same flash version v24-sp2. I've tried this multiple times and the router shows that its successful but the flash version never changes. Can someone help me with this please.


If you want to go use tomato, you should flash stock first.
It's not a good idea to go from 3rd party firmware to 3rd party.

_________________
I am far from a guru, I'm barely a novice.
Sponsor
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5358
Location: Texas

PostPosted: Sat Feb 04, 2017 21:24    Post subject: Re: Help with upgrade firmware after v24-sp2 Reply with quote
Shadowven wrote:
I need some help...
I have an E2500 v3 with DDWR v24-sp2(05/19/15) from Fractal. I upgraded flash with tomato-E2500v3USB-NVRAM60K-1.28.AT-RT-N5x-MIPSR2-3.4-138-MEGA-VPN.bin from https://advancedtomato.com/downloads/router/e2500v3

The flash said it was successful and I waited approx. 5 minutes.. I then did a 30/30/30 Reset and reconnected to router Gui. Apparently it didn't take flash because it still showing DDWRT gui with same flash version v24-sp2. I've tried this multiple times and the router shows that its successful but the flash version never changes. Can someone help me with this please.

Put linksys firmware back on before going to tomato would be wise choice.
see here >>> http://www.dd-wrt.com/phpBB2/viewtopic.php?t=307118
Shadowven
DD-WRT Novice


Joined: 01 Feb 2017
Posts: 2

PostPosted: Sun Feb 05, 2017 18:24    Post subject: Re: Help with upgrade firmware after v24-sp2 Reply with quote
Malachi wrote:
Shadowven wrote:
.


If you want to go use tomato, you should flash stock first.
It's not a good idea to go from 3rd party firmware to 3rd party.


Okay thanks Malachi~!
Linuxser
DD-WRT Novice


Joined: 24 Nov 2012
Posts: 6

PostPosted: Wed May 30, 2018 0:45    Post subject: But worked? Reply with quote
Hello,

I made another mistake handling one of three of my E2500 family. In fact I was moving back to dd-wrt

I tough was handling the V2 but I accidentally connected the V3 to flash.

After following the guidelines step by step, using trailed build 21061 first. Then just dumped 33772 and ups, three hours later is nicely working and doing WDS.

I did not flash the special build for v3 and had no problems at all.

Note: Router had tomato before but I did no flash stock prior to move to dd-wrt
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8 Display posts from previous:    Page 8 of 8
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum