Changelogs:
SVN* changelog since last build: 41117
Summary: (deprecated after 29739)
*Github mirror: https://github.com/mirror/dd-wrt/
Notes:
1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer
2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. PBR/UDP with SFE working again since r40513 (see 6729)
5. CAKE scheduler changes "completed" with r41057 (see 5796) & FQ_CODEL_FAST with r41027 (reset first!)
6. Reset button was broken in 40571; fixed in build 40750.
Issues, observations, and/or workarounds reported:
1. DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use: 6246
2. K2.6 builds are broken since 38253(?) (GUI issues): 6538
Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).
Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
Router/Version: File: Kernel: Mode: Status:
WARNING: This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build. _________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399 Install guide R7800/XR500:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614 Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Status: Up and running for 8 hours (had a private build to test), basic setup as Gateway, static leases, OpenVPN client (on PIA) with Policy Based Routing up and running, 2,4GHz, 5Ghz USB storage NAS and OpenVPN server working
Resolved: 1. Pushed DNS servers from VPN provider are now used, if you do not want that, add the following to the Additional Config of the VPN client:
pull-filter ignore "dhcp-option DNS"
2. This build has an improved VPN Policy Based Routing, it is now possible to use the VPN route command i.e. to route a DNS server via the VPN (in this way you will get rid of the DNS leak), see: https://svn.dd-wrt.com/ticket/6815#comment:1 , and for DNS leaks the second posting of this thread: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318662 3. Another improvement on PBR is that local routes are now copied over to the alternate routing table so there is communication if you have unbridged VAP's and you can set the router's IP on PBR.
See: https://svn.dd-wrt.com/ticket/6821#comment:3
I am studying on some more enhancements like the possibility to use "from [IP address] to [IP address]" and using things like the interface in the rules, so stay tuned .
I am studying on some more enhancements like the possibility to use "from [IP address] to [IP address]" and using things like the interface in the rules, so stay tuned .
Big Thanks to BrainSlayer and others devs!!
another is to have sfe work with qos or software flow offloading like in openwrt
I never understood why DD-WRT only had 3 DNS Server options. DNS Servers are supposed to be assigned in pairs. 3 is an odd number and thus not a correct pair.
It should be either the base 2 or the extended 4, not 3.
Kernel Version: Linux 4.9.194 #473 SMP Sun Sep 22 04:37:14 CEST 2019 armv7l
Upgraded from: DD-WRT v3.0-r41027 std (09/13/19)
Reset: No
Status: Up and running for 1 hour. No issues _________________ Netgear R7800 AP Netgear R7800 WAP miniDLNA 500+ HD movies
QOS Disable
ATT Fiber Internet 500
I never understood why DD-WRT only had 3 DNS Server options. DNS Servers are supposed to be assigned in pairs. 3 is an odd number and thus not a correct pair.
It should be either the base 2 or the extended 4, not 3.
I always wondered the same thing. The best I have come up with is that you want to point to a single internal and then your normal externals, or you have your two primaries and then one thrown in for fun.
Status: Running as an AP, minimal install on a new R7800. WIfI working great, no errors. Love all the options the r7800 gives you and the big time hardware upgrade over the ancient r6250 it replaced. _________________ R7800 x 3 hnyman OpenWRT
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Thu Sep 26, 2019 7:05 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r41135 std (09/25/19)
Kernel Version Linux 3.18.140 #55150 Wed Sep 25 05:07:20 +04 2019 mips
update: CLI 41117 > 41135
reset: NO
status: Operational
errors: at the end of CLI flashing it reported "bus error" never seen it before...otherwise 135 is up'n running...
so far so good, as i can see SVN is bursting, shall we expect a new build today...again..?? _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
try the last/old Kong build...40270..
otherwise those results must be, the other way around wired.. _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Router/Version: Netgear X10 r9000
File: Firmware: DD-WRT v3.0-r41135 std (09/25/19)
Kernel: Linux 4.9.194 #386 SMP Sun Sep 22 03:55:41 CEST 2019 armv7l
Mode: AP
Status: Operational (with issues)
Reset: No
Upgraded from: r41113
Issue #1: Privoxy @ ip 10.0.0.1:8118 returns error: "Maximum number of open connections reached."
Issue #2: SAMBA is not started automatically upon reboot. It is enabled but stopped. Need to 'apply' then 'save' 2 times to make it stick.
Issue #3: 60Ghz radio doesn't appear to work. Channel is not selected in 'auto' mode. Power output shows as '0dbm' on the sysinfo page. Edited to add: Enabling this radio caused the router to freeze requiring a hard reboot.
Issue #4: Syslog shows a lot of missing file errors such as the following:
.
