Posted: Thu Jan 10, 2008 10:30 Post subject: Bricked AG108 with 6.2
OpsCenter here: Just bricked AG108 unit upgrading to 6.2 - my first ever brick in years of dd-wrt'g.
Used GUI interface, (with revert to factory settings) - it responded as if everything ok. Got to point of saying successful, change IP address if needed.
Never get IP, and it would have been needed, since I had changed it.
Green power light comes on now, but nothing else.
30 second reset does nothing.
No response to ping, assuming 192.168.1.1 setting.
Made report to bug tracker...what are the options now? I bought 6 of these and need at least one for a repeater. They come from Brainslayer with 08/06.07 firmware, which seems to be pre-repeater.
These are my first AG-108s and I'm trying to read all the threads. Who has the time?
I wish I had seen that before I tried to flash it. ;-)
What version is working well, and with Repeater mode?
Regarding reflashing with Redboot: I presume that even though the unit seems bricked that Redboot is still firing up internally to the AG108 and I should be able to ssh a 5.x version...Is that correct?