TJTAG - EJTAG De-Brick tool - IMPORTANT CHANGE:See 1st Post.

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> General Questions
Goto page Previous  1, 2, 3, ... 82, 83, 84  Next
Author Message
Wingit
DD-WRT Novice


Joined: 25 Sep 2007
Posts: 43
Location: Independence, Louisiana

PostPosted: Wed Nov 07, 2007 20:56    Post subject: Reply with quote
Ok I'm flashing the cfe file now. had to use the tjtag -flash:cfe /noreset command to get it to erase and flash.
Sponsor
Wingit
DD-WRT Novice


Joined: 25 Sep 2007
Posts: 43
Location: Independence, Louisiana

PostPosted: Wed Nov 07, 2007 21:08    Post subject: Reply with quote
ok it finsihed in 9 min. and I unpluged the router and now the lights are off. Oh boy!!!

Ok what dd-wrt file do you want me to flash?


Last edited by Wingit on Wed Nov 07, 2007 21:13; edited 1 time in total
Luniz2k1
DD-WRT Guru


Joined: 04 Oct 2007
Posts: 1261
Location: Ohio USA

PostPosted: Wed Nov 07, 2007 21:11    Post subject: Reply with quote
Of course the lights are off, you unplugged it Cool

Just Kidding Smile

_________________
(05/02/17) std - 31924
Linksys WRT400N
Buffalo WHR-G300N

Got OpenDNS?
Wingit
DD-WRT Novice


Joined: 25 Sep 2007
Posts: 43
Location: Independence, Louisiana

PostPosted: Wed Nov 07, 2007 21:14    Post subject: Reply with quote
but I plugged it back in and they are off. I'm glad people are watching!! Embarassed :lol:

Which hopfully means I'm getting closer to not having a door stop. :roll:

Very Happy Tornado is being really patient with me. Very Happy


Last edited by Wingit on Wed Nov 07, 2007 21:19; edited 1 time in total
Luniz2k1
DD-WRT Guru


Joined: 04 Oct 2007
Posts: 1261
Location: Ohio USA

PostPosted: Wed Nov 07, 2007 21:17    Post subject: Reply with quote
I know, I was just having fun Cool
_________________
(05/02/17) std - 31924
Linksys WRT400N
Buffalo WHR-G300N

Got OpenDNS?
Wingit
DD-WRT Novice


Joined: 25 Sep 2007
Posts: 43
Location: Independence, Louisiana

PostPosted: Wed Nov 07, 2007 21:54    Post subject: Reply with quote
What is the current dd-wrt file out for a wrt54gs v7? Because the download section does not have one, or am I stuck until one comes out. I really don't want to flash back to the linksys firmware.

Can someone help with the tftp commands in vista?
Wingit
DD-WRT Novice


Joined: 25 Sep 2007
Posts: 43
Location: Independence, Louisiana

PostPosted: Thu Nov 08, 2007 14:30    Post subject: Reply with quote
So with the lack of responce I'm guessing that there is no new v7 file out.
Eko
DD-WRT Developer/Maintainer


Joined: 07 Jun 2006
Posts: 5772

PostPosted: Thu Nov 08, 2007 14:33    Post subject: Reply with quote
There was never special firmware for gsv7, you just use one for v8.
Wingit
DD-WRT Novice


Joined: 25 Sep 2007
Posts: 43
Location: Independence, Louisiana

PostPosted: Thu Nov 08, 2007 14:43    Post subject: Reply with quote
Great thanks! 8)

Oh and by the way the TFTP feature in vista has to be turned on in the Programs and Features section. I found that in the wiki Faq section. Nice job to he who wrote it!

But I tried the tftp command but getting a timeout error, any ideas?
lijianch
DD-WRT User


Joined: 14 Jul 2007
Posts: 145

PostPosted: Thu Nov 08, 2007 22:10    Post subject: Re: Tjtag - EJTAG tool with Gv8/GSv7 support Reply with quote
Thanks!

Tornado wrote:
Ok, Here is my modified HDM debrick tool, that I am calling Tjtag.
New additions include:
1. two new Flash Chips
2. four new processors
3. the addition of BSP for use with flash, erase, and backup
4. new switch /bypass - this switch can be used on AMD/Spansion style flash chips that support the unlock bypass command - it can decrease your flash time as much as 40-50%. It also disables polling.

EX. On my machine flashing a CFE to a Gv8 with EON 520 sec
230 sec using /bypass

The windows version is in the windows folder, linux in the linux folder, the windows version of this file was created using a cross compiler on Debian 4+, I have also included the source, in case you want to recompile it.

I would be interested in feedback from those of you that have had problems flashing the EON chip in the Gv8 - using the /bypass switch.

I will keep the latest revisions in this thread, until I have moved it to a download area.

As always, please leave feedback, its how we improve..

P.S> Special thanks to Eko, and all the members that helped me test.
Wingit
DD-WRT Novice


Joined: 25 Sep 2007
Posts: 43
Location: Independence, Louisiana

PostPosted: Fri Nov 09, 2007 13:20    Post subject: Reply with quote
Tornado, Eko

I installed the cfe file, everything went well. It erased the 11 locations and flashed. But while trying to test for ping I got nothing no responce. So tftp was not an option. Is there anything else?
depe
DD-WRT Novice


Joined: 20 Oct 2007
Posts: 4

PostPosted: Fri Nov 09, 2007 14:47    Post subject: Reply with quote
Hey Tornado my V8 is working again thanks to your tjtag !!!

great work !!!
Tornado
DD-WRT Developer/Maintainer


Joined: 07 Jun 2006
Posts: 2087
Location: Odessa, Ukraine

PostPosted: Fri Nov 09, 2007 16:52    Post subject: Reply with quote
Thank you, but most of that work has to be credited to the Original Author HDM " Hairy Dairy Maid " I am using his application as base to build on and improve, suggetions are welcome.
_________________
Want JTAG support - Donate a router
or Donate with PayPal !

My preferred parallel jtag adapter:
TIAO Parallel adapter

Tjtag website - http://tjtag.com

Compiling DD-WRT on:
AMD Phenom II X6 1090T @ 3926.667 Mhz

Aptosid X64 - Debian SID X64
Ubuntu 10.10 X64 - Arch X64
Wingit
DD-WRT Novice


Joined: 25 Sep 2007
Posts: 43
Location: Independence, Louisiana

PostPosted: Sat Nov 10, 2007 14:23    Post subject: Reply with quote
Well after giving up on trying ping the router last night I tried pluged into one of the 4 ports on the back and was able to ping that. But it would not upload the dd-wrt file. I also noticed that good old Mcafee uninstaller did not completely remove it's firewall so I'm trying to get that removed. I will continue to update with progress.
Wingit
DD-WRT Novice


Joined: 25 Sep 2007
Posts: 43
Location: Independence, Louisiana

PostPosted: Tue Nov 13, 2007 18:03    Post subject: Reply with quote
OK folks,
I have a wrt54gs v7 router and It's up and running. I was having trouble getting a ping response back. But I was in the wrong port, this is what I did:
I preformed a wholeflash to the router. All the lights are working as needed to be to operate normal. I plugged it into port 2, and then tried pinging. I got back the correct packets. So for some more giggles I opened up Internet Explorer and tried to access the Admin screen and was able to log onto the router (Linksys admin screen). Surprised Big giggles happening now Surprised . I'm thinking wow I back up again.

Is there something I need to check like maybe the mac address? If so what would or where can I get that?
Oh and by the way I had to add XP to my system (Dual Boot) because I could not get the Mcafee firewall uninstalled. Still waiting to get that information, and I have not tried the wireless part of the router yet. Will try when I get back to the hotel, at least I can talk to it again.

Note: Embarassed I know why I was having trouble getting a ping I was connecting to the internet port Embarassed. I set my IP as 192.168.1.2, then mask 255.255.255.0 dns 192.168.1.1. So my problems were user error Embarassed But I still have not tested the wireless.
Goto page Previous  1, 2, 3, ... 82, 83, 84  Next Display posts from previous:    Page 2 of 84
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> General Questions All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum