Apologize about yesterday's mess. I can confirm the new RC2 TJTAG is working on both CPU and flash of WRT320n UNDER THE BUFFERED MODE. I have tried the unbuffered mode but it does not work.
I re-write the E-2000 CFE to it but for some reason, it is not booting though.
Tornado wrote:
Please send the datasheet when requesting flash chips to be added, saves alot of time. send to tornado@tjtag.com
This really should be C2, 7E10 00 or 10 depending on top or bot boot
Apologize about yesterday's mess. I can confirm the new RC2 TJTAG is working on both CPU and flash of WRT320n UNDER THE BUFFERED MODE. I have tried the unbuffered mode but it does not work.
I re-write the E-2000 CFE to it but for some reason, it is not booting though.
Does serial console show any sign of activity?
At the very least, you could dump the CFE you just flashed and compare the file with the one on your hard drive.
I am trying to upload the E-2000 CFE and they (E2000 and my WRT320n CFEs) must be different.
I did not get any serial console information which indicates the writing is successful but the spot of CFE in the flash needs more tweaking.
BlCa` wrote:
lijianch wrote:
Apologize about yesterday's mess. I can confirm the new RC2 TJTAG is working on both CPU and flash of WRT320n UNDER THE BUFFERED MODE. I have tried the unbuffered mode but it does not work.
I re-write the E-2000 CFE to it but for some reason, it is not booting though.
Does serial console show any sign of activity?
At the very least, you could dump the CFE you just flashed and compare the file with the one on your hard drive.
ok, I will have to look at this, does not look like its running the flash probe at all, its late here, so I will get back to you tomorrow. I only have the RT-N16, with parallel, I have a router with serial but not a 4716... but I will take a look first thing in the morning. I know we have debrick and flash a cfe to a 320n
I second this. When I try to re-load the wrt320n CFE, it stops there as BlCa described.
BlCa` wrote:
Tornado wrote:
ok, I will have to look at this, does not look like its running the flash probe at all, its late here, so I will get back to you tomorrow. I only have the RT-N16, with parallel, I have a router with serial but not a 4716... but I will take a look first thing in the morning. I know we have debrick and flash a cfe to a 320n
I second this. When I try to re-load the wrt320n CFE, it stops there as BlCa described.
BlCa` wrote:
Tornado wrote:
ok, I will have to look at this, does not look like its running the flash probe at all, its late here, so I will get back to you tomorrow. I only have the RT-N16, with parallel, I have a router with serial but not a 4716... but I will take a look first thing in the morning. I know we have debrick and flash a cfe to a 320n
Any news yet?
Interesting. That means there's actually a bug somewhere that fubar this router. On the bright side, I can stop searching where I might have screwed up. Not so bright side: that bitch is cursed, I've been trying to revive it for about 9 months...
if you need a console, I can create an account at by office linux box to access the router.
BlCa` wrote:
lijianch wrote:
I second this. When I try to re-load the wrt320n CFE, it stops there as BlCa described.
BlCa` wrote:
Tornado wrote:
ok, I will have to look at this, does not look like its running the flash probe at all, its late here, so I will get back to you tomorrow. I only have the RT-N16, with parallel, I have a router with serial but not a 4716... but I will take a look first thing in the morning. I know we have debrick and flash a cfe to a 320n
Any news yet?
Interesting. That means there's actually a bug somewhere that fubar this router. On the bright side, I can stop searching where I might have screwed up. Not so bright side: that bitch is cursed, I've been trying to revive it for about 9 months...
PS. There is no Win 7 x64 3.0.2 yet, I will work on that after I have a stable Linux/XPx32 version _________________ Want JTAG support - Donate a router
or Donate with PayPal !
Joined: 07 Jun 2006 Posts: 2087 Location: Odessa, Ukraine
Posted: Fri Oct 08, 2010 12:55 Post subject:
Do me a favor, and run your probelony with /dma, lets force dms and see if the problem is pracc and post the results or e-mail me directly _________________ Want JTAG support - Donate a router
or Donate with PayPal !
Intial value of Control register is 0000000C
Intial value of status register is 0000007F
01111111 (0000007F)
Status bit 7 Busy Inverted pin 11 = 1
Status bit 6 *Ack pin 10 = 1
Status bit 5 Paper-out pin 12 = 1
Status bit 4 Select pin 13 = 1
Status bit 3 *Error pin 15 = 1
* means low = true, e.g., *Error
VCC connected
values of Control register after init 0x0000000C
value of status register after init 0x0000007F
system reset complete
Detected IR chain length = 32
Number of device(s) = 1
idcode 0x1471617f 32
Jtag is in LV mode
switching to MIPS mode
Probing bus ... Done
Instruction Length set to 5
CPU Chip ID: 00000000000010001100000101111111 (0008C17F)
*** Found a Broadcom BCM4716 Rev 1 CPU in MIPS MODE chip ***
- EJTAG IMPCODE ....... : 01100000010000010100000000000000 (60414000)
- EJTAG Version ....... : 3.1
- EJTAG DMA Support ... : No
- EJTAG Implementation flags: R4k ASID_8 MIPS16 NoDMA MIPS32
*** DMA Mode Forced On ***
