[Sucz]

Hello,

i have this router with dd-wrt v24-sp2 (03/25/13) std
(SVN revision 21061) installed, and have encountered very odd problem which didn't occur with original tp link firmware (v3).

So, i have Direct Connect hub working on crappy machine connected to router, on port 666 with static ip of 192.168.0.101 (port forwarding is set, hub works fine). Then, i have second machine on static address 192.168.0.100 and DC++ client set up to use UPnP (ports are assigning fine on router).

Now there is the problem, when i connect to my (first machine)hub with (second machine)client it detect ip 192.168.0.1 which is address of router. Oddly enough,it connects to hub and other users can download from me, also on other hubs(not mine) everything works fine! DC client is set up correctly (again, original firmware didnt had this problem), see attachment: my ip is first on the list and what it should be is in settings (Zewnetrzne/WAN IP).

Again, I can't download connected on my hub behind router with client behind router, but others can, even from me. I can download connected to hub NOT behind router with client behind router.

What i am doing wrong?


EDIT: After some time hub sends me a message: "Your client send incorrect IP 82.1**.*.*** in command, hub replaced it with your real IP 192.168.0.1 !".

EDIT2: When passive mode is set (ports doesnt get mapped) hub works fine, but then i can't download from other passive users

EDIT3: Tickoing "Filter WAN NAT Redirection" option in security tab prevents connecting to hub behind router.