WRT160N V3 full dump

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
orientalsniper
DD-WRT Novice


Joined: 08 Nov 2013
Posts: 2

PostPosted: Fri Nov 08, 2013 23:23    Post subject: WRT160N V3 full dump Reply with quote
Hello, does anyone have the full dump of WRT160N V3? I wiped clean the EEPROM chip (Macronix). Forgot to perform a backup Embarassed
Sponsor
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Sat Nov 09, 2013 13:27    Post subject: Reply with quote
you don't need a wholeflash.. it will take hours to flash and the opportunity for a failed flash is huge.

4 hours into it and it stalls.. not good.

you only need to flash a cfe. Once a good cfe is on the box, you can then tftp firmware and the nvram will be rebuilt.

Download a cfe, edit it with your macs, flash it, then tftp firmware.

There is no advantage with that box but you could flash a cfe for an E1000. Then you will have an E1000.

As said, no advantage with that box except for the fun factor.

_________________
[Moderator Deleted] Shocked
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum