Route between two uplinks

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Advanced Networking
Author Message
mathflair
DD-WRT Novice


Joined: 12 Nov 2013
Posts: 1

PostPosted: Tue Nov 12, 2013 3:25    Post subject: Route between two uplinks Reply with quote
I have my router setup in client mode to give internet to the connected LAN devices. In my apartment we also have a ethernet wall jack for getting IPTV. Unfortunately, this jack doesn't provide Internet though. So, I need to figure out how to setup my router so that all traffic to (128.187.16.167) is sent through the LAN uplink, while all other traffic continues to go through the WIFI client mode uplink. Is there anyway to do this?
Sponsor
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 5769
Location: Romerike, Norway

PostPosted: Tue Nov 12, 2013 19:26    Post subject: Reply with quote
Use a route 128.187.16.167 mask 255.255.255.255 gateway <ip address of LAN Link>
phuzi0n
DD-WRT Guru


Joined: 10 Oct 2006
Posts: 10143

PostPosted: Wed Nov 13, 2013 20:59    Post subject: Reply with quote
The WAN port won't have a DHCP client running so you will also need to either assign it an address with ifconfig or spawn another dhcpc process for it.
_________________
Read the forum announcements thoroughly! Be cautious if you're inexperienced.
Available for paid consulting. (Don't PM about complicated setups otherwise)
Looking for bricks and spare routers to expand my collection. (not interested in G spec models)
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Advanced Networking All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum