TP-LINK TL-WDR3600 HDD sharing, OPTWARE, DLNA, Torrent

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3, 4 ... 28, 29, 30  Next
Author Message
dulceata33
DD-WRT Novice


Joined: 26 Jan 2014
Posts: 5

PostPosted: Mon Jan 27, 2014 23:23    Post subject: Thanks Adsus Reply with quote
Thank u Adsus that solve all the problems.
Now everything works fine.
Sponsor
andsus
DD-WRT User


Joined: 06 Dec 2013
Posts: 51

PostPosted: Tue Jan 28, 2014 2:54    Post subject: Setup privoxy Reply with quote
Hi Marcelo,

if you have setup privoxy, or know the posting, please let me know how to setup wit dd-wrt environment.

Please check my question:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=257346&highlight=

Thanks
dulceata33
DD-WRT Novice


Joined: 26 Jan 2014
Posts: 5

PostPosted: Tue Jan 28, 2014 20:07    Post subject: Transmission Reply with quote
The transmission package is change

http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/transmission-daemon_2.82-2_ar71xx.ipk
http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/transmission-web_2.82-2_ar71xx.ipk

The packages have 2.82-2 instead of 2.82-1
skundra
DD-WRT Novice


Joined: 29 Jan 2014
Posts: 1

PostPosted: Thu Jan 30, 2014 9:08    Post subject: Reply with quote
Thx a lot, installed on wdr4300 without any problems.
valamwala
DD-WRT Novice


Joined: 27 Dec 2013
Posts: 3

PostPosted: Sat Feb 01, 2014 19:22    Post subject: Help Reply with quote
I still have the same problem after changing the URL.

My Putty Terminal

BusyBox v1.21.0 (2013-07-24 06:20:34 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

>>root@DD-WRT:~# cd /tmp/mnt/sda1
>>root@DD-WRT:/tmp/mnt/sda1# touch optware.enable
>>root@DD-WRT:/tmp/mnt/sda1# cd /tmp/mnt/sda2
>>root@DD-WRT:/tmp/mnt/sda2# mkdir etc opt root useful
>>root@DD-WRT:/tmp/mnt/sda2# touch optware.enable
>>root@DD-WRT:/tmp/mnt/sda2# chmod 755 etc opt root
>>root@DD-WRT:/tmp/mnt/sda2# mkdir opt/lib
>>root@DD-WRT:/tmp/mnt/sda2# chmod 755 opt/lib
>>root@DD-WRT:/tmp/mnt/sda2# cp -a /etc/* /tmp/mnt/sda2/etc/
>>root@DD-WRT:/tmp/mnt/sda2# sleep 15
>>root@DD-WRT:/tmp/mnt/sda2# mount -o bind /tmp/mnt/sda2/etc/etc
>>root@DD-WRT:/tmp/mnt/sda2# mount -o bind /tmp/mnt/sda2/opt/jffs
>>root@DD-WRT:/tmp/mnt/sda2# cd /tmp
>>root@DD-WRT:/tmp# wget http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/libc_0.9.33.2-1_ar71xx.ipk
>>root@DD-WRT:/tmp# wget http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/opkg_9c97d5ecd795709c8584e972bfdf3aee3a5b846d-6_ar71xx.ipk
>>root@DD-WRT:/tmp# ipkg install libc_0.9.33.2-1_ar71xx.ipk opkg_9c97d5ecd795709c8584e972bfdf3aee3a5b846d-6_ar71xx.ipk
<<File not found libc_0.9.33.2-1_ar71xx.ipk
<<File not found opkg_9c97d5ecd795709c8584e972bfdf3aee3a5b846d-6_ar71xx.ipk
>>root@DD-WRT:/tmp#
dyndns0r
DD-WRT Novice


Joined: 16 Feb 2014
Posts: 1

PostPosted: Sun Feb 16, 2014 19:43    Post subject: Reply with quote
@msantos2007 : thx for the guide

I just bought the WDR3600 and im a noob with ss-wrt , optware and so on

Everything works fine until:

1. Optware
...
opkg update


You should see:
Quote:

Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/Packages.gz.
Updated list of available packages in /opt/tmp/var/opkg-lists/snapshots.

Problem: On my screen it does not show what I should see :D .
I just continued the tutorial without it.
Problem: 1.3 -> I dont see a colorful prompt.
Problem: 1.4 update gets me the following text:


root@Router:~# opkg update
Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/Package s.gz.
Updated list of available packages in /opt/tmp/var/opkg-lists/snapshots.
Collected errors:
* opkg_conf_parse_file: /etc/opkg.conf:5: Ignoring invalid line: `EOF '
* opkg_conf_parse_file: /etc/opkg.conf:6: Ignoring invalid line: `umount /jffs '
* opkg_conf_parse_file: /etc/opkg.conf:7: Ignoring config line with trailing ga rbage: `mount -o bind /tmp/mnt/sda2/root /tmp/root '
* opkg_conf_parse_file: /etc/opkg.conf:8: Ignoring config line with trailing ga rbage: `mount -o bind /tmp/mnt/sda2/opt /opt '
* opkg_conf_parse_file: /etc/opkg.conf:9: Ignoring invalid line: `export LD_LIB RARY_PATH='/opt/lib:/opt/usr/lib:/lib:/usr/lib' '
* opkg_conf_parse_file: /etc/opkg.conf:10: Ignoring invalid line: `opkg update '
* opkg_conf_parse_file: /etc/opkg.conf:11: Ignoring config line with trailing g arbage: `cat > /tmp/mnt/sda2/root/.profile << EOF '
* opkg_conf_parse_file: /etc/opkg.conf:12: Ignoring invalid line: ` export LD_L IBRARY_PATH='/opt/lib:/opt/usr/lib:/lib:/usr/lib:/opt/usr/local/lib' '
* opkg_conf_parse_file: /etc/opkg.conf:13: Ignoring invalid line: `export PATH= '/sbin:/opt/bin:/opt/usr/bin:/opt/sbin:/opt/usr/sbin:/bin:/usr/bin:/usr/sbin:/op t/usr/local/bin' '
* opkg_conf_parse_file: /etc/opkg.conf:14: Ignoring config line with trailing g arbage: `export PS1='\[\033[01;31m\]\u@\h \[\033[01;34m\]\w $ \[\033[00m\]' '
* opkg_conf_parse_file: /etc/opkg.conf:15: Ignoring invalid line: `export TERMI NFO='/opt/usr/share/terminfo' '


Can you or anybody else help me with this? Thx.
msantos2007
DD-WRT User


Joined: 13 Oct 2009
Posts: 220

PostPosted: Mon Feb 17, 2014 14:49    Post subject: Reply with quote
Please see:

"1.1 Run the following line-by-line, using PuTTY:(...)"

You should hit enter every line.
garvus
DD-WRT Novice


Joined: 08 Feb 2014
Posts: 2

PostPosted: Thu Feb 20, 2014 16:46    Post subject: So ....worked until the admin script. Now puTTY wont login! Reply with quote
NEVER MIND THANKS!

Last edited by garvus on Thu Feb 20, 2014 17:38; edited 1 time in total
ruben1234
DD-WRT Novice


Joined: 11 Feb 2014
Posts: 8

PostPosted: Sat Feb 22, 2014 18:43    Post subject: Reply with quote
@msantos2007

Thanks for this guide, very useful.

I have installed transmission in my WR842NDv2, using the latest dd-wrt FW (02/19/2014). It has worked smoothly, however I have noticed that the router has rebooted by itself a couple of times when downloading. I'll keep investigating.

Update: It seems the router memory is full, after a few minutes the downloads stop or get only 4-6 kb/s. It comes back to normal after rebooting


BTW: It's a silly question, How can I open the port for transmission? It's supposed to be open but it appears as closed....

Thanks again
marcopanozzo19
DD-WRT Novice


Joined: 28 Jan 2014
Posts: 2

PostPosted: Thu Feb 27, 2014 11:07    Post subject: Trasmission-daemon problem with your procedure Reply with quote
Hi Marcelo

Sorry if I have made some errors but is the first time that i use this forum.

I have a tplink wr1043ND
I have problems with the trasmission daemon after to install as your procedure.
I have used an HD 1.5Tb instead the USB key and with only one partition.
During the installation i have replaced the sda2 with sda1.
Now the web page of trasmission daemon is open but all torrents that i have added don't download nothing.
Download 0 bit, upload 0 bit.

I have added as you write the firewall setting
iptables -I INPUT -p TCP --dport 9091 -j ACCEPT

But nothing

Have you a tip?


oh.. I forgot to tell you that this router is my second router configured as a Client Bridge and connected to a WR841ND That is my primary router where run also dd-wrt firmware.
The firmware version of two routers is the last.

do you think that I have to open some ports on the firewall also of the primary router?
If yes, can you write me all ports needed of all routers?

Thank for all your work

Marco
marcopanozzo19
DD-WRT Novice


Joined: 28 Jan 2014
Posts: 2

PostPosted: Fri Feb 28, 2014 7:55    Post subject: dlna problem Reply with quote
Hi again

Yesterday evening I have tested my router with minidlna installed

On my samsung tv I can see only some movies on the video folders

Someone know why?

I have search into the forum but I have found only a post where is writed to modify the minidlna.conf moving the video directory in the scan order at the first position like this:

Code:
media_dir=V,/mnt/share/Videos
media_dir=P,/mnt/share/Pictures
media_dir=A,/mnt/share/Music


I have also uninstall the libffmpeg-custom and install the libffmpeg-full

After a reboot nothing change... Crying or Very sad

Plese Help!!!

Thanks!
Taboganist007
DD-WRT Novice


Joined: 17 Jan 2014
Posts: 22

PostPosted: Fri Mar 14, 2014 19:42    Post subject: Reply with quote
I'm getting a segmentation fault when I attempt to install mini dlna, I've screen-capped the fault so if someone could take a look and tell me where I've been going wrong I'd be grateful for any input!





As you can see, I've followed the instructions to the letter - any help would be appreciated.
Ike310
DD-WRT Novice


Joined: 15 Mar 2014
Posts: 1

PostPosted: Sat Mar 15, 2014 15:14    Post subject: I got the same problem to. Reply with quote
Taboganist007 wrote:
I'm getting a segmentation fault when I attempt to install mini dlna, I've screen-capped the fault so if someone could take a look and tell me where I've been going wrong I'd be grateful for any input!





As you can see, I've followed the instructions to the letter - any help would be appreciated.
Sauliuz
DD-WRT Novice


Joined: 14 Mar 2014
Posts: 3

PostPosted: Sun Mar 16, 2014 10:28    Post subject: Reply with quote
Hi, guys, I have one problem, I installed optware, wanted to use my "Logitech Quickcam Messenger" 046d:08da webcam as surveillance cam indoor, force-depends installed kmod-video-core, kmod-video-gspca-core, kmod-video-gspca-zc3xx, but can't get kmod packages to work, lsmod just don't show them in the list when I install them even after reboot, but opkg list-installed shows them, and dmesg shows that it don't recognize that 046d:08da is my USB webcam, and there is no /dev/video. I guess it's because different kernel versions, r23720 build has 3.10.33, and openwrt trunk uses 3.10.32. Is there any way to make those kernel modules load properly? Webcam is just one example, I can't get to work any of those kmod packages. And that's what I get in dmesg when I try to insmod various modules:
Code:
[ 1129.020000] v4l2_common: Unknown symbol i2c_unregister_device (err 0)
<4>[ 1129.020000] v4l2_common: Unknown symbol spi_new_device (err 0)
<4>[ 1129.030000] v4l2_common: Unknown symbol v4l2_ctrl_get_menu (err 0)
<4>[ 1129.040000] v4l2_common: Unknown symbol i2c_new_probed_device (err 0)
<4>[ 1129.050000] v4l2_common: Unknown symbol v4l2_ctrl_fill (err 0)
<4>[ 1596.820000] cdc_acm: Unknown symbol warn_slowpath_null (err 0)
<4>[ 1621.460000] cdc_acm: Unknown symbol warn_slowpath_null (err 0)
roliverio
DD-WRT Novice


Joined: 18 Mar 2014
Posts: 10

PostPosted: Tue Mar 18, 2014 1:34    Post subject: ddwrt (23320 on WR1043ND) not auto-starting after reboot. Reply with quote
Hello msantos2007, thanks for the guide and the rest of you for the helpful comments.

@msantos2007: Your guide helped me to get started, altought i'm having an autostart issue with all the installation (i.e. whenever i restart the router and log in via ssh i don't get to the chrooted prompt, only plain simple ddwrt, of course, no services get started, like minidlna or transmission), alas, i've set up the same rc_startup script (with minor mods) as a shell script, that i simply login and execute, then, all starts working.

I'm still baffled about why it isn't auto-starting.

As i pointed out, i'm running 23320 on a wr1043ND.

I've set up the disk (a 4TB one, with a couple of NTFS partitions) just like your guide, and i've activated samba sharing on the two of them, also, automount is active.

If any of you can help me get over this minor issue it would be greatly apprecciated.
Goto page Previous  1, 2, 3, 4 ... 28, 29, 30  Next Display posts from previous:    Page 3 of 30
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum