New Kong's test build: DD-WRT 35550M - 2018/03/28

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3, 4, 5, 6  Next
Author Message
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 2158
Location: Netherlands

PostPosted: Wed Mar 28, 2018 9:24    Post subject: New Kong's test build: DD-WRT 35550M - 2018/03/28 Reply with quote
Kong's DD-WRT test build v3.0-r35550M kongac (28/03/2018) has been released: http://desipro.de/ddwrt/K3-AC-Arm/TEST/

Your reports for Broadcom units are greatly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:

This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29440_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

_________________
Router Netgear R6400v1, Netgear R6400v2, Linksys EA6900 (XvortexCFE), Linksys E2000 (converted WRT320N), WRT54GS v1.
Install guide Linksys EA6900: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=291230
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Sponsor
Bernadoe
DD-WRT User


Joined: 03 Dec 2014
Posts: 156

PostPosted: Wed Mar 28, 2018 11:01    Post subject: Reply with quote
Router: Netgear R7000
Firmware: DD-WRT v3.0-r35550M kongac (03/28/2018)
Kernel: Linux 4.4.124 #548 SMP Wed Mar 28 09:52:34 CEST 2018 armv7l
Status: Working
Reset: No
Previous: 35530M
Errors: No

CPU Temperature : 50.2 °C / WL0 43.3 °C / WL1 45.0 °C

Working very well :
Router mode : DHCP
SFE Enable
STP Enable
DNSMasq
Encrypt DNS
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Local DNS
No DNS Rebind
Query DNS in Strict Order
SPI Firewall
Usb
Nas, MiniDLNA, Samba, JFFS2,
MAC Filter
wl0, wl1
Vpn (OpenVPN Client) OpenVPN 2.4.5

Kong and BS: Thanks for all your good work!

without VPN



with VPN
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 2158
Location: Netherlands

PostPosted: Wed Mar 28, 2018 11:34    Post subject: Reply with quote
Router Model: Netgear R6400

Firmware Version: DD-WRT v3.0-r35550M kongac (03/28/2018)
Kernel Version: Linux 4.4.124 #548 SMP Wed Mar 28 09:52:34 CEST 2018 armv7l

Upgraded: from DD-WRT v3.0-r35530M kongac (03/25/2018)via ddup --flash-latest
Reset: No not this time

Status: Up and running for 2 hours, basic setup as AP, static leases, OpenVPN client ( on PIA) with Policy Based Routing up and running, 2,4GHz, 5Ghz USB storage NAS and miniDLNA working.
OpenVPN server up and running.
Samba maybe now needs the Server and Workgroup settings to show up in Windows.
GUI is responsive and quick

Errors: Yes
OpenVPN with Policy Based Routing does not forward HTTP(s) traffic to the PBR clients with SFE on see: http://svn.dd-wrt.com/ticket/5900.
Possible DNS leak see: http://svn.dd-wrt.com/ticket/6020

There is a solution, to the PBR not working with SFE[/b], @Quarkysg has made a patch for the shortcut-fe module (see: http://svn.dd-wrt.com/ticket/5986#no1 )
He also compiled a shortcut-fe.ko module for testing (Arm/Broadcom , Linux 4.4) see: https://www.dd-wrt.com/phpBB2/viewtopic.php?p=1107870#1107870 , I am running that shortcut-fe.ko module right now and it is working.

Big Thanks to Kong and BrainSlayer!!

_________________
Router Netgear R6400v1, Netgear R6400v2, Linksys EA6900 (XvortexCFE), Linksys E2000 (converted WRT320N), WRT54GS v1.
Install guide Linksys EA6900: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=291230
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
jheide44
DD-WRT Guru


Joined: 03 Sep 2013
Posts: 729

PostPosted: Wed Mar 28, 2018 13:05    Post subject: Reply with quote
Netgear R6400
Kong PTB 35530 file dated 3/25/2018 --> Kong PTB 35550 file dated 3/28/2018 )

**Dirty Flash -- NO RESET**

Firmware Version: DD-WRT v3.0-r35550M kongac (03/28/18 )
Kernel Version: Linux 4.4.124 #548 SMP Wed Mar 28 09:52:34 CEST 2018 armv7l

File: http://www.desipro.de/ddwrt/ or http://ddwrt-kong.clonevince.fr/
File Name: dd-wrt.v24-K3_AC_ARM_STD_128K.bin
MD5: N/A, used ddup from CLI


DDNS -- OK (custom for dnsomatic)
SSH Tunneling -- OK
RDP session via port forwarding thru SSH Tunnel -- OK
OpenDNS Content Filtering -- OK
SAMBA -- OK, 2tb public NAS no security
MiniDLNA -- DID NOT CHECK THIS TIME, I am on the far side of SSH Tunnel

no reboots and solid WiFi (will keep this thread updated if anything changes)

**note: Flashed from the far side of an SSH tunnel. Initial testing performed based on 30 minutes observations, I will update if anything above is not accurate**



ddup command love notes:

login as: root
DD-WRT v3.0-r35530M kongac (c) 2018 NewMedia-NET GmbH
Release: 03/25/18
Authenticating with public key "rsa-key-20180327"
Passphrase for key "rsa-key-20180327":


BusyBox v1.28.1 (2018-03-25 23:37:42 CEST) built-in shell (ash)

root@DD-WRT:~# ddup --flash-latest
New release 35550 for Netgear R6400 available.
Do you want to update (y/n) [default=n]:
y
Connecting to www.desipro.de (212.227.247.157:80)
fw.bin 100% |*******************************| 23080k 0:00:00 ETA
Connecting to www.desipro.de (212.227.247.157:80)
fw.bin.sig 100% |*******************************| 256 0:00:00 ETA
Signature for http://www.desipro.de/ddwrt/K3-AC-Arm/TEST/dd-wrt.v24-K3_AC_ARM_STD_128K.bin ok.
Are you sure you want to proceeed (y/n) [default=n]:
y
Closing ssh connections now. Flashing now...
root@DD-WRT:~#


*** REBOOT HERE ***


login as: root
DD-WRT v3.0-r35550M kongac (c) 2018 NewMedia-NET GmbH
Release: 03/28/18
Authenticating with public key "rsa-key-20180327"
Passphrase for key "rsa-key-20180327":


BusyBox v1.28.1 (2018-03-28 09:57:41 CEST) built-in shell (ash)

root@DD-WRT:~#

_________________
reenignE esreveR
Resistance is NOT futile... It's Voltage divided by Current!

[size=9]
_.-:Curently Deployed Devices:-._
Loc_1.0: R6400 -- Kong PTB 35550M 03-28-2018
Loc_2.0: R6300v2 -- Kong PTB 35550M 03-28-2018
Loc_3.0: R6300v2 -- Kong PTB 35030M 02-19-2018
Loc_4.0: R6300v2 -- Kong PTB 28600M 12-31-2015 (Radios OFF) & 5 Ubiquity UniFi APs
Loc_4.1: E4200 -- BrainSlayer K2.6 30880
Others: too many others to list

UNofficial Repo Kong's old builds HERE.

R7000 (& similar HW) Tips/Tricks HERE.

Assumptions:
1. Everyone on the forum has read the relevant forum section announcements.
2. For Broadcom section we have ALL at least tried to understand the "Peacock" thread,
HERE


Last edited by jheide44 on Wed Mar 28, 2018 18:51; edited 1 time in total
wabe
DD-WRT Guru


Joined: 17 Jun 2006
Posts: 647

PostPosted: Wed Mar 28, 2018 14:38    Post subject: Reply with quote
Router: Asus AC68U rev.A1
Firmware: DD-WRT v3.0-r35550M kongac (03/28/2018)
Kernel: Linux 4.4.124 #548 SMP Wed Mar 28 09:52:34 CEST 2018 armv7l
Status: Working
Reset: No, power cycle
Previous: 35530M
Errors: No

Everything seems to work well.

_________________
AC-68U on Build 37015M (Main)
AC-68U on Build 37015M
AC-68U on Build 37015M
labo
DD-WRT Guru


Joined: 30 Jan 2015
Posts: 587
Location: Texas, USA

PostPosted: Wed Mar 28, 2018 15:03    Post subject: Reply with quote
Router: Netgear R7000
Firmware: DD-WRT v3.0-r35550M kongac (03/28/18 )
Kernel: Linux 4.4.124 #548 SMP Wed Mar 28 09:52:34 CEST 2018 armv7l
Status: Working
Errors: Nothing important to worry about.

_________________
2 X R9000: Main router & WDS- STA
1 X R7800 WDS-STA
1 X R8000: Repeater bridge 1
1 X R7000: Repeater bridge 2
1 X RT-AC68U: Repeater bridge 3

Unused (Due to Lack of RB support in DD-WRT, currently):
R8500 MP2 version as RB.
ASUS RT-AC5300 as RB.
DLINK DIR895L as RB.
labo
DD-WRT Guru


Joined: 30 Jan 2015
Posts: 587
Location: Texas, USA

PostPosted: Wed Mar 28, 2018 15:08    Post subject: Reply with quote
[quote="Bernadoe"]Router: Netgear R7000
Firmware: DD-WRT v3.0-r35550M kongac (03/28/2018)
Kernel: Linux 4.4.124 #548 SMP Wed Mar 28 09:52:34 CEST 2018 armv7l
Status: Working
Reset: No
Previous: 35530M
Errors: No

CPU Temperature : 50.2 °C / WL0 43.3 °C / WL1 45.0 °C

Working very well :
Router mode : DHCP
SFE Enable
STP Enable
DNSMasq
Encrypt DNS
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Local DNS
No DNS Rebind
Query DNS in Strict Order
SPI Firewall
Usb
Nas, MiniDLNA, Samba, JFFS2,
MAC Filter
wl0, wl1
Vpn (OpenVPN Client) OpenVPN 2.4.5

Kong and BS: Thanks for all your good work!

without VPN


Wow, amazing that you get > 900mbps on R7000 Smile
Is the router overclocked?

_________________
2 X R9000: Main router & WDS- STA
1 X R7800 WDS-STA
1 X R8000: Repeater bridge 1
1 X R7000: Repeater bridge 2
1 X RT-AC68U: Repeater bridge 3

Unused (Due to Lack of RB support in DD-WRT, currently):
R8500 MP2 version as RB.
ASUS RT-AC5300 as RB.
DLINK DIR895L as RB.
eywong
DD-WRT User


Joined: 21 Jul 2010
Posts: 106
Location: USA

PostPosted: Wed Mar 28, 2018 15:08    Post subject: Asus RT-AC68U A1 Reply with quote
Router: Asus RT-AC68U (H/W Ver: A1)
Firmware: DD-WRT v3.0-r35550M kongac (03/28/18)
Previous: DD-WRT v3.0-r35530M kongac (03/25/18)
Kernel: Linux 4.4.124 #548 SMP Wed Mar 28 09:52:34 CEST 2018 armv7l
Previous: Linux 4.4.124 #542 SMP Sun Mar 25 23:32:52 CEST 2018 armv7l
Status: ok
Reset: no (ddup --flash-latest)
Errors: no
Uptime: 1:15

wl0: AP / NG-Mixed / Ch 11
Channel Width: 20 MHz
wl1: AP / NA-Mixed / Ch 52 + 54
Channel Width: Wide HT40
Extension Channel: lower
DHCP Server: Enabled - Running
Static Leases: 4 hardwired NAS, 1 wireless printer
NTP Client: Enable
Server IP/Name: us.pool.ntp.org
IPv6: Disable
jheide44
DD-WRT Guru


Joined: 03 Sep 2013
Posts: 729

PostPosted: Wed Mar 28, 2018 18:50    Post subject: Reply with quote
Netgear R6300v2
Kong PTB 33675 file dated 11/3/17 --> Kong PTB 35550 file dated 3/28/2018

**Dirty Flash -- NO RESET**

Firmware Version: DD-WRT v3.0-r35550M kongac (03/28/18 )
Kernel Version: Linux 4.4.124 #548 SMP Wed Mar 28 09:52:34 CEST 2018 armv7l

File: http://www.desipro.de/ddwrt/ or http://ddwrt-kong.clonevince.fr/
File Name: dd-wrt.v24-K3_AC_ARM_STD_128K.bin
MD5: N/A, used ddup from CLI


DDNS -- OK (custom for dnsomatic)
SSH Tunneling -- OK (update to 2048 bit key!)
**note: Flashed from the far side of an SSH tunnel. Initial testing performed based on 30 minutes observations, I will update if anything above is not accurate**



ddup command love notes:

login as: root
DD-WRT v3.0-r33675M kongac (c) 2017 NewMedia-NET GmbH
Release: 11/03/17
Authenticating with public key "rsa-key-20180327"
Passphrase for key "rsa-key-20180327":
==========================================================

___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/

DD-WRT v3.0
http://www.dd-wrt.com

==========================================================


BusyBox v1.27.2 (2017-11-03 23:24:05 CET) built-in shell (ash)

root@DD-WRT:~# ddup --flash-latest
New release 35550 for Netgear R6300V2 available.
Do you want to update (y/n) [default=n]:
y
Connecting to www.desipro.de (212.227.247.157:80)
fw.bin 100% |*******************************| 23080k 0:00:00 ETA
Connecting to www.desipro.de (212.227.247.157:80)
fw.bin.sig 100% |*******************************| 256 0:00:00 ETA
Signature for http://www.desipro.de/ddwrt/K3-AC-Arm/TEST/dd-wrt.v24-K3_AC_ARM_STD.bin ok.
Are you sure you want to proceeed (y/n) [default=n]:
y
Closing ssh connections now. Flashing now...
root@DD-WRT:~#


*** REBOOT HERE ***


login as: root
DD-WRT v3.0-r35550M kongac (c) 2018 NewMedia-NET GmbH
Release: 03/28/18
Authenticating with public key "rsa-key-20180327"
Passphrase for key "rsa-key-20180327":


BusyBox v1.28.1 (2018-03-28 09:48:38 CEST) built-in shell (ash)

root@DD-WRT:~#

_________________
reenignE esreveR
Resistance is NOT futile... It's Voltage divided by Current!

[size=9]
_.-:Curently Deployed Devices:-._
Loc_1.0: R6400 -- Kong PTB 35550M 03-28-2018
Loc_2.0: R6300v2 -- Kong PTB 35550M 03-28-2018
Loc_3.0: R6300v2 -- Kong PTB 35030M 02-19-2018
Loc_4.0: R6300v2 -- Kong PTB 28600M 12-31-2015 (Radios OFF) & 5 Ubiquity UniFi APs
Loc_4.1: E4200 -- BrainSlayer K2.6 30880
Others: too many others to list

UNofficial Repo Kong's old builds HERE.

R7000 (& similar HW) Tips/Tricks HERE.

Assumptions:
1. Everyone on the forum has read the relevant forum section announcements.
2. For Broadcom section we have ALL at least tried to understand the "Peacock" thread,
HERE
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1261
Location: Canada

PostPosted: Wed Mar 28, 2018 20:22    Post subject: Reply with quote
@Home
Router: 2x Netgear R7000 (MAIN+AP)
Firmware: DD-WRT v3.0-r35550M kongac (03/28/18)
Kernel: Linux 4.4.124 #548 SMP Wed Mar 28 09:52:34 CEST 2018 armv7l
Status: Working, Will Monitor
Reset: No from Build 35530M used ddup --flash-latest
Errors: Yes in syslog - httpd Request Error Code 401 during GUI Login
Uptime: Over 4 hours

_________________
Home Network on Telus PureFibre - Wired GigaBit Backbone
| SSH | DDNS | DNSCrypt-Proxy | DHCP/Static IPs | Ad-Blocking |
| USB Storage - Scripts Only | VLANs/BRs | WiFi - APs/VAPs |
| OpenVPN-Client | YAMon3 | Telus-IPv6 | ebtables | ip6tables |

Gateway R7000 - KONGAC 36070M Release 2018-05-31
Wireless R7000 - KONGAC 36070M Release 2018-05-31

______________________
YAMon 3.0 | Ad-Blocking for DD-WRT
DDWRT 60-day Timeline/changelogs
Kong Builds | DD-WRT Beta Builds
CloneVince's copies of Kong's Arm Firmware
PunisherHD
DD-WRT Novice


Joined: 23 Mar 2018
Posts: 1

PostPosted: Wed Mar 28, 2018 21:07    Post subject: Reply with quote
Router Model: Netgear R7000

Firmware Version: DD-WRT v3.0-r35550M kongac (03/28/2018)
Kernel Version: Linux 4.4.124 #548 SMP Wed Mar 28 09:52:34 CEST 2018 armv7l

Upgraded: from DD-WRT v3.0-r35530M kongac (03/25/2018)via ddup --flash-latest
Reset: No

Status: Up and running for 2 hours, basic setup as ethernet router, tagged vlans, OpenVPN server, wifi 2,4GHz, 5Ghz, IPv6.

Errors: Yes

I cannot use the ddwrt provided 'ip6tables' to set DSCP field on IPv6 trafic. It works correctly in IPv4 using 'iptables'.

# modprobe xt_dscp
# grep dscp /proc/net/ip6_tables_matches
dscp
# ip6tables -t mangle -A POSTROUTING -o eth0.832 -p ipv6-icmp -j CLASSIFY --set-class 0000:0006
ip6tables v1.3.7: Couldn't find match `dscp'

Try `ip6tables -h' or 'ip6tables --help' for more information.

# ip6tables -t mangle -m dscp
(same result ...)

AFAIK, this is not a new bug (problem existed in previous firmwares too).

Workaround: I'm using my own built 'ip6tables' binary that works as expected with the previous commands.
fhteagle
DD-WRT Novice


Joined: 21 Mar 2018
Posts: 5

PostPosted: Wed Mar 28, 2018 22:12    Post subject: Reply with quote
Routers: Netgear R7000P and R7000
Firmware: DD-WRT v3.0-r35550M kongac (03/28/1Cool
Kernel: Linux r7000p 4.4.124 #548 SMP Wed Mar 28 09:52:34 CEST 2018 armv7l DD-WRT
Status: 5h45m uptime on R7000P so far, R7000 upgraded just now
Reset: Loaded .chk via webui, No reset (coming from Kong 35030 on each)
Errors: No errors so far

Observations:

- Samba3 daemon stability seems improved vs 35030

- Low link rate between this gateway and another R7000 in Repeater bridge mode continues. However, link INFO now correctly reported as HT40 instead of VHT80. Separate thread here: https://www.dd-wrt.com/phpBB2/viewtopic.php?t=314349&highlight=
myersw
DD-WRT Guru


Joined: 13 Jun 2006
Posts: 1609
Location: SE Michigan USA

PostPosted: Thu Mar 29, 2018 0:21    Post subject: Reply with quote
Router: Netgear r8000
Firmware: DD-WRT v3.0-r35550M kongac (03/28/1Cool
Kernel: Linux 4.4.124 #548 SMP Wed Mar 28 09:52:34 CEST 2018 armv7l
Status: Gateway/running
Reset: No. Webflash without reset
Errors: None.

Up for 3 hours now without errors. Streaming a movie while entering this.

_________________
Unifi Security Gateway: Unifi Firmware
Netgear r7800: Voxel Firmware
Modem:Netgear CM500V voice and Data.
ISP:Comcast
tutorial for flashing "WRT" series:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=287813
DD-WRT Installation, Upgrade & Basic Setup–Cliff Notes:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117
Kong DD-WRT Config Tutorial:
http://www.instructables.com/id/Install-and-Configure-a-DD-WRT-Kong-Router/
I tried to be normal once. Worst 2 minutes ever.
pix5650
DD-WRT User


Joined: 18 Feb 2007
Posts: 71
Location: Bern, Switzerland

PostPosted: Thu Mar 29, 2018 4:37    Post subject: Reply with quote
Router: Buffalo WZR-1750DHCP
Firmware: DD-WRT v3.0-r35550M kongac (03/28/18)
Kernel: Linux 4.4.124 #548 SMP Wed Mar 28 09:52:34 CEST 2018 armv7l
Status: Up and running
Reset: No
Errors:
- WAN Connection Type "Mobile Broadband" isn't working (since 34015M)

_________________
Deployed:
Buffalo WZR-1750 - v3.0-r36070M kongac (05/31/18) - Router
Buffalo WZR-1750 - v3.0-r36820M kongac (09/01/18) - Client Bridge
Buffalo WZR-1750 - v3.0-r33770M kongac (11/15/17) - Router
Linksys WRT320 -> E2000 - v3.0-r33772 K30 mega (11/16/17) - Client Bridge

Others:
Buffalo WZR-1750, GL.iNet 6416, GL.iNet AR150, TP-Link TL-WR703N,
Linksys WRT610Nv2 -> E3000, Linksys E3000, Linksys E2000, Linksys WRT54GL
Xeon2k8
DD-WRT Guru


Joined: 11 Feb 2016
Posts: 1310

PostPosted: Thu Mar 29, 2018 5:56    Post subject: Reply with quote
labo wrote:

Wow, amazing that you get > 900mbps on R7000 Smile
Is the router overclocked?

No it isn't, he uses IPv6 if I recall correctly.

_________________
R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS)
R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS)
R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS)
R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
Goto page 1, 2, 3, 4, 5, 6  Next Display posts from previous:    Page 1 of 6
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum