[HELP]LevelOne WBR-6601 (Ralink RT 3050) Bricked

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware
Author Message
justintcs
DD-WRT Novice


Joined: 22 Aug 2013
Posts: 3

PostPosted: Thu Aug 22, 2013 16:26    Post subject: [HELP]LevelOne WBR-6601 (Ralink RT 3050) Bricked Reply with quote
When I was upgrading the firmware, my house suddenly black out, and the router bricked.The modem still can power on but only the wlan LED keep on blinking. I tried the 30/30/30 ,tftp method, serial port one also, all of them are not working.

The 30/30/30 , the router has no responds at all even do I hold the reset button for like 5 minutes.
For the TFTP, there's no respond from the router at all..
Serial port, with using hyperterminal, I got some weird symbol every time when I plug in the power cord and the weird symbols always appears the same.

And there's no JTAG port on the pcb, so any idea???

Here's the specs of the router
http://wikidevi.com/wiki/LevelOne_WBR-6601
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum