Joined: 24 Oct 2008 Posts: 1079 Location: Latin America
Posted: Sun Aug 04, 2013 2:36 Post subject:
Router: f7d7301
Build: 22118 K26 big
No problems upgrading. Selected reset to defaults.
.-Wireless not broadcasting when channel set to auto. With fixed channel, the virtual SSID is broadcasted but the physical doesn't
.-Solved the SIP proxy local registration 401 issue I found on 18777 and 21061
.-Wiviz survey not working, as in all the latest builds (I recall was working on 15962)
.-Funny USB page on Chrome (see bellow). In IE, enable core USB is only shown once
21676.png
Description:
For comparison, the same menu for build 21676, IE.
Filesize:
21.12 KB
Viewed:
33418 Time(s)
22118.png
Description:
Two USB core dialog on chrome. Even after clearing temporary files.
Filesize:
50.83 KB
Viewed:
33456 Time(s)
_________________ If you want support, please read first the announcements and forum rules.
Si usted desea ayuda, por favor lea primero los anuncios y las reglas del foro.
I am not an expert but I found what can be a problem, I was note able to connect it to VPN HideMyAss VPN servers so far.
The same precess was followed to WRT54G v4 and it is working fine.
Any ideas?
Enable Syslog and show your /var/log/messages.
From what I recall the VPN won't try to start (which is your case) if it sees an error in the additional config field. In my case I was seeing what appears to be a race condition between the moment the user.conf is created in the router startup script and the time OpenVPN looks for the username/password in user.conf. In my case I removed the sole IP I had set in the Policy Based Routing and this somehow helped the timing and allowed OpenVPN to see the file in time and boot.
Also, try to save your config once the VPN starts because in my case the iptables rule priority got changed (after several starts and stops of the service) so that the VPN was running but none of the traffic was being routed to it because the first rule stated that all traffic went out to vlan2 rather than tun1. Reboots didn't help so I did a reset to defaults and reloaded the config and, somehow, the rules came back in the proper order and the all traffic went out the VPN.
------------------------------
Asus RT-N66U on dd-wrt.v24-22118_NEWD-2_K3.x-mega-RT-N66U.trx
Last edited by whitebeard on Sun Aug 04, 2013 14:35; edited 4 times in total
-Funny USB page on Chrome (see bellow). In IE, enable core USB is only shown once
I'm also seeing the same strange behavior on FF although I'm thinking I just don't understand the intent of the page. There are 2 USB ports on the Asus RT-N66U but the options on the ports are different and somehow clicking on a radio button removes that option from the other port. Inserting a USB drive ends up showing drive info in both windows.
Router: Buffalo WZR-1750DHP
ISP: Comcast
Firmware: Buffalo stock (2.03) to DD-WRT 22118, WZR-1750DHP build (using factory-to-dd-wrt.bin)
Status: Currently bricked.
Initial flash plus reset was fine. Started programming in config, including changing router IP then hit "Reboot Router" on the Management page and all settings were lost; seemed more like a factory reset than a reboot.
Tried programming in just router name and SSID, save settings, and reboot under management page - all fine. More configs, including changing router IP, reboot under management page - router now bricked; buffalo logo is white and flashing red twice. Not sure if trying to change the router IP is significant, but all of this happened while trying to reboot the router.
30/30/30 reset ineffective, not receiving DHCP from the unit.
Set TCP Congestion control to Westwood, apply it, wait a minute and reboot.
DD-WRT uses NAT, while stock firmware uses Fast-NAT, this explains the difference in speed. However, if you need functions like miniDLNA, OpenVPN, ssh server, privoxy proxy, OTRW2 services (like pixelserv, for adds and malware blocking) and so on, choose DD-WRT. _________________ 2 times APU2 Opnsense 21.1 with Sensei
2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)
3 times Asus RT-N16 shelved
E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)
3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)
Posted: Thu Aug 08, 2013 22:53 Post subject: Netgear WNDR4000
Router: WNDR4000
Previous build: 19342 big
I tried the big and versions of 22118 and WiFi completely did not work (no signal detected using Wifi Analyser on Android, nor MacAir 2011, for G and N)
dd-wrt.v24-22118_NEWD-2_K2.6_mega-nv64k.bin (no WiFi)
dd-wrt.v24-22118_NEWD-2_K2.6_big-nv64k.bin (no WiFi)
No amount of resetting to defaults and 30/30/30 resets did anything to enable the WiFi. Nor disabling/enabling radio on wl0/wl1, nor changing SSID on/off, nor WiFi mode.
Joined: 14 Jan 2010 Posts: 73 Location: Flint, Michigan
Posted: Sat Aug 10, 2013 2:19 Post subject: USB Automount Issue with 22118
I recently sought to upgrade to dd-wrt.v24-22118_NEWD-2_K2.6_big-nv60k. When I tried to remount my external hard drive with OTRW take 2 installed, the build incorrectly identified the ext3 partitions as ext4 and refused to mount the optware partition to /opt and the data partition to /mnt.
Have others seen this issue with 22118? Currently running Eko's dd-wrt.v24-17084_NEWD-2_K2.6_big-nv60k, which was just prior to automount problems cropping up in that development stream.
What is the latest stable build that people are running on their E3000 and are you using OTRW and OpenVPN without issue? _________________ Netgear R7800
DD-WRT v3.0-r54545 std
Release: 12/18/2023 (SVN revision: 54545)
Joined: 10 May 2008 Posts: 1380 Location: Pacific North West, USA
Posted: Sun Aug 11, 2013 6:16 Post subject: Re: USB Automount Issue with 22118
can't flash wrote:
I recently sought to upgrade to dd-wrt.v24-22118_NEWD-2_K2.6_big-nv60k. When I tried to remount my external hard drive with OTRW take 2 installed, the build incorrectly identified the ext3 partitions as ext4 and refused to mount the optware partition to /opt and the data partition to /mnt.
Have others seen this issue with 22118? Currently running Eko's dd-wrt.v24-17084_NEWD-2_K2.6_big-nv60k, which was just prior to automount problems cropping up in that development stream.
What is the latest stable build that people are running on their E3000 and are you using OTRW and OpenVPN without issue?
Soylent Green Is People ! 
=-=-=-=-=-=-=-=-=-=-=