Build 22060 R6300/WNDR4500/RT-AC66U

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3 ... 11, 12, 13  Next
Author Message
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4225
Location: Germany

PostPosted: Tue Jul 09, 2013 19:42    Post subject: Build 22060 R6300/WNDR4500/RT-AC66U Reply with quote
Update 17 July 2013:

New AC Router build is available. Tested models R6300/WNDR4500/RT-AC66U. D1800H is untested but should also work.

RT-AC66U will only report 128MB RAM, this is because I did not yet create a special build for the Asus with HIGHMEM support.

It fixes the most annoying bugs seen on these units:

- router reboot loop, crash when qos was enabled
- bad wan-lan routing performance

I have done quite some testing this time and consider this a very stable release.

Please report back WAN-LAN speeds if you have a internet connection with >100Mbps downlink.

Link: http://www.desipro.de/ddwrt/K3-AC/

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/


Last edited by <Kong> on Wed Jul 17, 2013 20:05; edited 1 time in total
Sponsor
okaegi
DD-WRT Novice


Joined: 18 Mar 2012
Posts: 45

PostPosted: Tue Jul 09, 2013 20:02    Post subject: Reply with quote
I flashed built 21995 to my wndr4500v1.
FTP and samba works.
Good work, I use my wndr4500v1 only as an accesspoint..

Thank you
Oliver

_________________
WNDR3700v1 (Dhcp,Wlan-G,Openntpd) build 23802
WNDR3700v2 (Client Bridge, Sony DPF-HD1000) build 23802
WNDR4000 (Client Bridge, Camera) built 22118
WNDR4000 (Nas-only 1 TB, Synology Save Server) built 22118
WNDR4500v1 (Wlan-N) build 22118
WNDR4500V1 (Nas-only 2 TB) built 23802
R6300 (Wlan-AC) Netgear
rkozola
DD-WRT User


Joined: 27 Oct 2007
Posts: 152

PostPosted: Thu Jul 11, 2013 14:54    Post subject: Reply with quote
what toolchain are you using to compile the k3 builds?
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4225
Location: Germany

PostPosted: Wed Jul 17, 2013 20:20    Post subject: Reply with quote
rkozola wrote:
what toolchain are you using to compile the k3 builds?


Same one BrainSlayer uses and you will see the compiler version info in bootlog.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
Dark_Shadow
DD-WRT Guru


Joined: 31 Aug 2009
Posts: 2430
Location: Third Rock from the Sun

PostPosted: Thu Jul 18, 2013 1:52    Post subject: Reply with quote
If I read the readme correctly, this should be able to flash to the Buffalo AirStation WZR-D1800H, right?
_________________
Peacock Thread-FAQ -- Firmware Recommendations -- dd-wrt Wiki

Testing Multiple Routers -- Bootloader Collection Project -- My Wiki
aichan
DD-WRT Novice


Joined: 13 Mar 2012
Posts: 4

PostPosted: Thu Jul 18, 2013 11:30    Post subject: Reply with quote
Now the WAN-LAN speeds is about 12xMbps.
A Little bit better.
Thanks!
gluon
DD-WRT Novice


Joined: 15 Feb 2013
Posts: 11

PostPosted: Thu Jul 18, 2013 13:05    Post subject: Reply with quote
@Kong

Do you have any plan for RT-N66U K3.x build?
basmaf
DD-WRT Guru


Joined: 24 Feb 2011
Posts: 1074

PostPosted: Thu Jul 18, 2013 17:51    Post subject: Reply with quote
@Kong

Are you going to provide a highmem build for the ac66?
Finally got mine last week.
okaegi
DD-WRT Novice


Joined: 18 Mar 2012
Posts: 45

PostPosted: Thu Jul 18, 2013 17:59    Post subject: Reply with quote
Here are the result of my test:

my new cabelcom modem
Download 150'000 kbit/s
Upload 10'000 kbit/s

modem connected to r6300 / netgear firmware

speedtest with pc (lan)

first pic

upgrade (via lan) wnd4500v1 without reset
DD-WRT v24-sp2 (07/04/13) kongac - build 21995
to
DD-WRT v24-sp2 (07/17/13) kongac - build 22060
no problems

modem connected to wndr4500v1 / built 22060

speedtest with pc (lan)

second pic

Very close...Could I test anything else ?
Regards Oliver
P.S. result iperf-speedtest to wndr4500v1 / wlan 2.4 n
82844 Kbits/sec -> I order a new usb wland adapter for my laptop...



quick.png
 Description:
quick netgear fw
 Filesize:  32.64 KB
 Viewed:  51803 Time(s)

quick.png



slow.png
 Description:
slow dd-wrt built 22060
 Filesize:  31.67 KB
 Viewed:  51803 Time(s)

slow.png



_________________
WNDR3700v1 (Dhcp,Wlan-G,Openntpd) build 23802
WNDR3700v2 (Client Bridge, Sony DPF-HD1000) build 23802
WNDR4000 (Client Bridge, Camera) built 22118
WNDR4000 (Nas-only 1 TB, Synology Save Server) built 22118
WNDR4500v1 (Wlan-N) build 22118
WNDR4500V1 (Nas-only 2 TB) built 23802
R6300 (Wlan-AC) Netgear


Last edited by okaegi on Fri Jul 19, 2013 4:48; edited 1 time in total
jackykoning
DD-WRT User


Joined: 15 May 2013
Posts: 187
Location: The Nederlands

PostPosted: Thu Jul 18, 2013 18:11    Post subject: Reply with quote
very positive download speed 109 mbits (was 68 mbits) my isp should give me 120 mbits. going to test ptp.
_________________
Hi Smile
2x Netgear R7800
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4225
Location: Germany

PostPosted: Thu Jul 18, 2013 18:17    Post subject: Reply with quote
@okaegi,

great thanks for the test. I'll continue to search for improvements. Of course we cannot compete with OEM firwares since they are using proprietary accelleration modules that provide a lot of speed but, missing features that are needed in order to provide the functionality that dd-wrt comes with.

Asus for example lets you choose if you want to enable it or disable it which needs to be disabled if you want to use advanced qos. Once you do that Asus OEM FW is dead slow:-)

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
pbanj
DD-WRT Novice


Joined: 18 Jul 2013
Posts: 4

PostPosted: Thu Jul 18, 2013 19:55    Post subject: Reply with quote
i am using the july 4th 21995 build on my wndr4500v1 and its running great. the only thing i have noticed is when using usb connected devices if you select it to share pictures, music, and videos it makes the drive show up 3 times. is there anyway to fix this or will it always be like that?
rkozola
DD-WRT User


Joined: 27 Oct 2007
Posts: 152

PostPosted: Thu Jul 18, 2013 22:17    Post subject: Reply with quote
<Kong> wrote:

Same one BrainSlayer uses and you will see the compiler version info in bootlog.


ahh, so it is not available in the toolchain archive at http://www.dd-wrt.com/site/support/other-downloads?path=others/sourcecode/toolchains/
nomad
DD-WRT User


Joined: 11 Sep 2006
Posts: 59
Location: netherlands

PostPosted: Fri Jul 19, 2013 15:44    Post subject: Reply with quote
Hi Kong,

my wan-lan speeds are very different, between 60 and 109mbit, sometime peaks to 120mbit very briefly. isp gives 120 and i get 120mbit steady when i connect my desktop directly to the modem.

5ghz led doesnt work yet, no big deal

switching between wl0/wl1 on the infopage while not logged in results in an connection reset error, no big deal either.

ipv6 firewalling, I can't use ip6tables, can you include the kernelmodule in a future build?

using 22060

with kind regards
-nomad
athurdent
DD-WRT User


Joined: 22 Nov 2008
Posts: 88
Location: .de

PostPosted: Sat Jul 20, 2013 7:18    Post subject: Reply with quote
Great, finally a KongMod build for my AC devices. Installed on RT-AC66U and Buffalo WZR-D1800H, working fine. I only use them as Access Points, so I cannot provide WAN/WAN data, sorry.
Do I need to reset the devices when coming from the latest DD-WRT build? I just flashed KongMod without resetting and did not find any issues yet.
Goto page 1, 2, 3 ... 11, 12, 13  Next Display posts from previous:    Page 1 of 13
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum