Posted: Sat May 16, 2020 14:30 Post subject: New Build - 05/16/2020 - r43171
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Notes:
• CVE-2019-14899 VPN fix from December, since then various revisions including recently 7040.
• In-kernel Samba has been implemented this year and default min/max versions have changed, with WSD support.
• VAP issue is fixed! For any Wireless Mode, create a VAP and both ath0/ath1 should now function properly.
• WireGuard 1.0 & tools! New GUI Tunnel options since r42872; now with key management! Setup guides: Client & Server by egc
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
Issues:
• There may be remaining issues for Samba (for example NTFS), with frequent updates.
Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.
Linksys EA8500
DD-WRT v3.0-r43171 std (05/16/20)
Linux 4.9.223 #545 SMP Tue May 12 01:51:36 +03 2020 armv7l
GUI install over r43149
everything working very good ...& NO, haven't reset this ol girl in long time
Uptime 9:51
main gateway router
static leases
local DNS
port range forwarding
ath0 & ath1 both good
isolated net on VLAN port 4 + ath0.1 + ath1.1 via br1
OVPN server
samba share ext4
HFSC CAKE
http://www.dslreports.com/speedtest/63738222
Netgear WNDR3700 V4
DD-WRT v3.0-r43171 std (05/16/20)
Linux 3.18.140-d4 #78644 Sat May 16 05:12:30 +04 2020 mips
GUI install over r43168
all ok on this switch, OVPN server, samba share ext4
Uptime 10:01
Router/Version: tplink 842nd v2
File/Kernel:DD-WRT v3.0-r43171
Previous/Reset:43136 / No
Mode/Status: Mobile broadband
Issues/Errors: i can not make it work.
i am trying to make it work with a 4G usb Huawei stick the E3372 h 153
This is some information i am getting from the terminal.
Joined: 08 May 2018 Posts: 14221 Location: Texas, USA
Posted: Sat May 16, 2020 16:40 Post subject:
drdedus wrote:
Router/Version: tplink 842nd v2
File/Kernel:DD-WRT v3.0-r43171
Previous/Reset:43136 / No
Mode/Status: Mobile broadband
Issues/Errors: i can not make it work.
i am trying to make it work with a 4G usb Huawei stick the E3372 h 153
This is some information i am getting from the terminal.
Joined: 08 May 2018 Posts: 14221 Location: Texas, USA
Posted: Sun May 17, 2020 1:18 Post subject:
Router Model / Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r43171 std (05/16/20)
Kernel: Linux 4.9.223 #545 SMP Tue May 12 01:51:36 +03 2020 armv7l
Previous: DD-WRT v3.0-r43055 std (05/05/20)
Reset: No
Mode: Uptime: ~10 hours
Status: OK
Issues / Errors:
Router Model / Version: Netgear R9000
File: r9000-webupgrade.bin
Firmware: DD-WRT v3.0-r43171 std (05/16/20)
Kernel: Linux 4.9.223 #453 SMP Tue May 12 01:20:03 +03 2020 armv7l
Previous: DD-WRT v3.0-r43055 std (05/05/20)
Reset: No
Mode: Uptime: ~10 hours
Status: OK
Issues / Errors: _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Joined: 16 Nov 2015 Posts: 6437 Location: UK, London, just across the river..
Posted: Sun May 17, 2020 5:13 Post subject:
Router Model / Version: Netgear R7800
Firmware: DD-WRT v3.0-r43171 std (05/16/20)
Kernel: Linux 4.9.223 #545 SMP Tue May 12 01:51:36 +03 2020 armv7l
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r43171 std (05/16/20)
Kernel Version Linux 3.18.140-d4 #78616 Sat May 16 04:17:58 +04 2020 mips
Router Model TP-Link TL-WR740N
Firmware Version DD-WRT v3.0-r43171 std (05/16/20)
Kernel Version Linux 3.10.108-d10 #47074 Sat May 16 03:34:57 +04 2020 mips
Update: CLI
Previous: DD-WRT v3.0-r43136
Reset: No
Uptime: 24+ hours
Status: Operational...
Errors: so far, so good, all works, no mem-leaks detected...i can't see DNSmasq reports in the syslog any more...
logging-in in forum using PIA ..This IP is SPAMBOT detected...had to trick it out... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Tue May 19, 2020 7:33; edited 1 time in total
Mode: DHCP, AP isolation, Net Isolation, Multiple VAPs, WPA3-Enterprise, WPA3-Enterprise Suite B 192 bit, Wireguard - Enabled, PBR, FreeRadius, 400 Mbps ISP WAN + 4G LTE fail-over, 5GHz radio - 160MHz mode, 2.4GHz radio - Disabled, 60GHz radio - Disabled, R9000 cpuidle state1 (low frequency state) - Disabled for 4 cores, Unifi UAP-AC-SHD - Client Isolation & 802.1X via R9000 w/ WPA3 Enterprise, Unifi UAP-XG - Client Isolation & 802.1X via R9000 w/ WPA3 Enterprise, Cisco Meraki MR46 - Client Isolation & 802.1X via R9000 w/ WPA3 Enterprise
File: DD-WRT v3.0-r43171 std (05/16/20)
Status: One spontaneous and unexpected reboot about 10 mins after upgrade. Very slightly lower wireless performance on high speed networks.
Errors: 1 spontaneous/random reboot. Wireless performance is down by 2 to 5% (over 300 speed tests performed).
Cisco Meraki MR46 Wifi 6 and Ubiquiti UAP-AP-SHD APs connected to R9000 RJ-45 ports still perform optimally so it is likely down to a DD-WRT wireless performance issue introduced in this build.
Also performed a reset with manual settings entry afterwards to no avail.
Joined: 30 Jan 2015 Posts: 676 Location: Texas, USA
Posted: Sun May 17, 2020 21:06 Post subject:
tatsuya46 wrote:
kernel-panic69 wrote:
Router Model / Version: Netgear R9000
File: r9000-webupgrade.bin
Firmware: DD-WRT v3.0-r43171 std (05/16/20)
Kernel: Linux 4.9.223 #453 SMP Tue May 12 01:20:03 +03 2020 armv7l
Previous: DD-WRT v3.0-r43055 std (05/05/20)
Reset: No
Mode: Uptime: ~10 hours
Status: OK
Issues / Errors:
is the 802.11ad radio in r9000 working decently yet?
This never worked. I have two R9000s and wanted to have short distance < 12ft line of sight, WDS repeater bridge using the AD radios and gave up after spending so much time. Now I have a 10Gb port wired to QNAP 12port switch. _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh