Any plans to fix gui for "switch config" on r9000?

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Author Message
Nuor
DD-WRT User


Joined: 20 Apr 2015
Posts: 114

PostPosted: Mon Aug 21, 2023 21:02    Post subject: Any plans to fix gui for "switch config" on r9000? Reply with quote
As the GUI for the "switch config" tab seems to now work well for many dd-wrt units. I was wondering if there is anyone working on overhauling it for the r9000. If I had any confidence in my programming skills I'd give it a try but my fairly limited c++ skills are not up to the task.

Last edited by Nuor on Tue Aug 22, 2023 12:39; edited 1 time in total
Sponsor
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6389
Location: UK, London, just across the river..

PostPosted: Tue Aug 22, 2023 7:03    Post subject: Reply with quote
Hi there... Smile
R9000 has a quite of a complex switch (in fact double switch and cpu ports) to handle...so, to make it work via GUI is a big challenge, as it will consist totally different set of commands...
However you can use the switch segmentation via swconfig commands via startup script..I'm using its x2 LAN ports as an isolated VLAN's..
There was a nice guide made by one of our forum members...if you cannot find it give us a call...i can share my commands set up if so...

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 55416 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55416 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
foz111
DD-WRT Guru


Joined: 01 Oct 2017
Posts: 704
Location: Earth

PostPosted: Wed Aug 23, 2023 15:23    Post subject: Reply with quote
It would indeed be a welcome feature!! Laughing
_________________
Netgear R7800 PPPoE Main Router
Network IPV4 - Isolated Vlan's with IoT Devices. Unifi AC-Pro x 3 AP's, Router Wi-Fi Disabled. OVPN Server With Paid Commercial Wireguard Client's. Gateway Mode, DNSMasq, Static Leases & DHCP, Pi-Hole DNS & Running Unbound.

No one can build you the bridge on which you, and only you, must cross the river of life!
Theodore
DD-WRT Novice


Joined: 28 Apr 2022
Posts: 4

PostPosted: Sun Nov 19, 2023 1:41    Post subject: Reply with quote
Alozaros wrote:

There was a nice guide made by one of our forum members...if you cannot find it give us a call...i can share my commands set up if so...


I would really appreciate either a link to the guide or the commands you used. I've been fighting with this for 20+ hours to no avail.

Thanks in advance.
Nuor
DD-WRT User


Joined: 20 Apr 2015
Posts: 114

PostPosted: Sun Nov 19, 2023 3:27    Post subject: Reply with quote
Theodore wrote:


I would really appreciate either a link to the guide or the commands you used. I've been fighting with this for 20+ hours to no avail.

Thanks in advance.


I believe this guide is what you are looking for. It works fine for me.
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6389
Location: UK, London, just across the river..

PostPosted: Sun Nov 19, 2023 4:34    Post subject: Reply with quote
Theodore wrote:
Alozaros wrote:

There was a nice guide made by one of our forum members...if you cannot find it give us a call...i can share my commands set up if so...


I would really appreciate either a link to the guide or the commands you used. I've been fighting with this for 20+ hours to no avail.

Thanks in advance.


yep guide is very useful, if you get lost i can share my swconfig for x2 VLAN's on two separate LAN ports.(you also need to add x2 DHCPd and add those 2 VLAN's to separate bridges ((my config))
i never bothered to make more than 2 as i dont need more than 2 Razz

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 55416 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55416 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Theodore
DD-WRT Novice


Joined: 28 Apr 2022
Posts: 4

PostPosted: Sun Nov 19, 2023 18:31    Post subject: still working on it Reply with quote
I've been looking for the guide but I haven't found it.

I've hopped on the R9000 and poked around a bit I don't have a lot of experience with vlans from the cli (or vlans in general lol). I was able to get up and running with a vlan providing dhcp to the wan port then the R9000 lan providing dhcp to the connected wifi devices but I'd like to clean up the chain with the R9000 just active as an AP rather than providing its own dhcp.

I found both the internal switches and their associated ports via cli but I'm nervous to poke at them because I don't know which is the sfp port vs the cpu port. The final deployment will be 2 tagged vlans from pfsense run through a managed switch to the R9000. The pfsense box will be providing dhcp so no need to setup the dhcp servers on the R9000. Any advise is greatly appreciated.
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2900
Location: Germany

PostPosted: Sun Nov 19, 2023 18:44    Post subject: Reply with quote
The SFP port is not connected to the switch at all but directly to the CPU
_________________
Quickstart guides:
use Pi-Hole as simple DNS-Server with DD-WRT
VLAN configuration via GUI - 1 CPU port
VLAN configuration via GUI - 2 CPU ports (R7800, EA8500 etc)

Routers
Marvell OCTEON TX2 - QHora-322 - OpenWrt 23.05.2 - Gateway
Qualcomm IPQ8065 - R7800 - DD-WRT - WAP
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1889

PostPosted: Sun Nov 19, 2023 19:05    Post subject: Reply with quote
Theodore wrote:
I've been looking for the guide but I haven't found it.
Nuor wrote:
Theodore wrote:
I would really appreciate either a link to the guide...

I believe this guide is what you are looking for. It works fine for me.

Taming the Dual-Switch BEAST for VLANing on Netgear R9000 V5.6.pdf (Direct Download Link)
Code:
Last edited by DWCruiser on Wed Aug 23, 2023 18:14; edited 12 times in total

_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
Theodore
DD-WRT Novice


Joined: 28 Apr 2022
Posts: 4

PostPosted: Mon Nov 20, 2023 20:55    Post subject: THANK YOU! Reply with quote
Oh man this is so helpful. Understanding the underlying mechanism of the internal switches makes all the difference. Do you happen to know what number switch port corresponds to the SFP+ port (eth0)?
D.F.Cruizer
DD-WRT User


Joined: 14 May 2023
Posts: 92

PostPosted: Mon Nov 20, 2023 21:27    Post subject: Reply with quote
Yes. eth0 is SFP+ on R9000.

Currently it's attached to br0.
Theodore
DD-WRT Novice


Joined: 28 Apr 2022
Posts: 4

PostPosted: Mon Nov 20, 2023 23:08    Post subject: Reply with quote
okay so its interface id is eth0 but how does that relate to its internal switch assignment.

i.e. Switch 0 port 0 - eth1 bound to cpu
Switch 0 port 5 - eth2 bound to cpu
Switch 0 port 1 - physical rj45 port 2

Switch 1 port 1 - physical rj45 port 6

so Switch ? port ? - eth0 / physical SFP+ port is what I'm trying to figure out
D.F.Cruizer
DD-WRT User


Joined: 14 May 2023
Posts: 92

PostPosted: Tue Nov 21, 2023 2:29    Post subject: Reply with quote
ho1Aetoo wrote:
The SFP port is not connected to the switch at all but directly to the CPU

Sorry. I did not realize it was mentioned earlier. So CLI of 'Switch X port Y' is not needed.

As a result, you can simply configure SFP+ port (to another device downstream), using DDWRT GUI on |Setup|Networking| pages.

As a matter of fact, I am looking forward to set up my planned downlink to another router, MikroTik RB5009, once the necessary gears (2x SFP+ SR 850nm Multimode Transceivers) arrive.
D.F.Cruizer
DD-WRT User


Joined: 14 May 2023
Posts: 92

PostPosted: Mon Dec 04, 2023 7:01    Post subject: Reply with quote
The last component in my order of:

1. MikroTik RB5009UG+S+IN (no PoE version);
2. FLYPRO LC to LC, Multimode Fiber Optic Patch Cable, and
3. 2x used Finisar FTLX8571D3BCL 10GbE 850nm SR multimode SFP+ Transceiver

finally arrived today.

Plug the dual Fiber Patch Cable in. One end to R9000 (gateway router) and the other to RB5009. And voila, RB5009 is connected to R9000 in its own VLAN. Net traffic starts flowing through from R9000 to RB5009 to my network.

Still monitoring the generated heat from SFP+ which I don't believe to be an issue having followed closely a thread on HEAT from Netgear R9000 SFP+ on DDWRT forum. Cool
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum