Broadcom K3.X testing, test users wanted

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3 ... 54, 55, 56, 57, 58  Next
Author Message
Madmanguruman
DD-WRT User


Joined: 06 Nov 2010
Posts: 51
Location: Canada

PostPosted: Thu Nov 02, 2017 0:37    Post subject: Reply with quote
dd-wrt.v24-33607_NEWD-2_K3.x_mega_RT-N12.trx seems to be working well on my RT-N12 D1. Serial CFE/TFTP'd the file direct from stock, LAN and wireless seem to be working (currently configured as a client bridge).
Sponsor
Whammy
DD-WRT User


Joined: 14 Aug 2007
Posts: 50

PostPosted: Mon Nov 06, 2017 0:18    Post subject: Reply with quote
There are no K3 11/04 builds.
mikaël
DD-WRT Novice


Joined: 02 Sep 2008
Posts: 3

PostPosted: Tue Nov 07, 2017 6:51    Post subject: Reply with quote
Hi, I am using V3.0-r29218 mega (03-07-16) on e4200.
It works fine.

Now I need it, I am surprised that Rflow is gone.
Is rflow back on newer version ?
If not, is it on newer 2.6 ?

Thanks,
thracx
DD-WRT Novice


Joined: 14 Apr 2010
Posts: 18

PostPosted: Thu Nov 09, 2017 5:51    Post subject: Asus RT-N16 with DD-WRT K3 r33607 Big Reply with quote
The latest K3 version* appears to be working on my Asus RT-N16 without issue, although it did require a reasonably complicated flashing process to get it working.

I am not a heavy WiFi user, but initial tests are showing 330Mpbs speeds over WAN.


* The actual latest release (11-04-2017-r33679) did not provide a K3 option, so the build used was r33607_NEWD-2_K3.x-big.

_________________
-Thracx

"Man wants to know, and when he ceases to do so, he is no longer a man."
-Fridtjof Nansen
Kali_B_Linux
DD-WRT Novice


Joined: 11 Oct 2017
Posts: 4
Location: New York, USA

PostPosted: Sat Nov 25, 2017 17:25    Post subject: Reply with quote
I will start posting results from my e1200v2 router. I have been busy but expect to be more active in the community over the next few weeks.
native_tx
DD-WRT User


Joined: 26 Feb 2014
Posts: 139
Location: Texas

PostPosted: Tue Nov 28, 2017 12:05    Post subject: Reply with quote
I had tried the r33607 & r33772 mega builds for my E3200 and both loaded fine with no issues, no performance issues to the 2.4ghz but the only problem that always stands out is the Qos just enabling it takes 65% of the ingress bandwidth, the egress performance had no issues. I sat around most of the day troubleshooting on those two builds, reading from dd-wrt wiki on qos to see if there was something adding that I had already knew of but not much has changed, I used on different settings on either the netmask set to single ip or mac and used either the premium or express both performed ok, let say that I have a 100/10 connection after running several test i did a average and was 119/11. Placing around 80% of the ingress value in and ran ping test while speed testing the ingress was always at 57mbps/8mbps no matter what value I placed for the ingress it didn't move from 57, but once i did 10% of the 57Mbps then the ingress pings were lowering to a the 20ms no packet loss, ok now I decided to unplug and wait after each setting and ran the test all over again with same conclusion that showed a proper response from the same values that I placed to those results I did earlier
. Now I decided to do the same test again unplug and power up on different the codel and htb same results and with same conclusion until i did the same as before to receive a positive response and lower ms ping and same with hsfc and fq_codel same until I reproduced the again settings to lower the ms ping. The same with the previous build r33607 as the same method I did with r33772. I checked and noticed if I had issues with sirq and that worked up abit and could have made that happen during those tests but still I took a look at the traffic control of the same settings with fq_codel/codel with htb or hsfc and checked after powering down and then up, flashing or clearing nvram there seems to be a problem with an unknown qdisc involved that not loading.

# tc -s qdisc ls dev imq0
qdisc htb 1: root refcnt 2 r2q 10 default 30 direct_packets_stat 0
Sent 10275392 bytes 8608 pkt (dropped 0, overlimits 8079 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 100: parent 1:100 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 10: parent 1:10 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 20: parent 1:20 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 30: parent 1:30 [Unknown qdisc, optlen=48]
Sent 224140 bytes 542 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 40: parent 1:40 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 211: parent 1:211 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 212: parent 1:212 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 213: parent 1:213 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 214: parent 1:214 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 215: parent 1:215 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 221: parent 1:221 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 222: parent 1:222 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 223: parent 1:223 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 224: parent 1:224 [Unknown qdisc, optlen=48]
Sent 10051252 bytes 8066 pkt (dropped 366, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 225: parent 1:225 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 231: parent 1:231 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 232: parent 1:232 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 233: parent 1:233 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 234: parent 1:234 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 235: parent 1:235 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
---------------------------------

root@dd-wrt:~# tc -s qdisc ls dev eth0
qdisc pfifo_fast 0: root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
Sent 2261708145 bytes 3827251 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
--------------------------------

root@dd-wrt:~# tc -s qdisc ls dev eth1
qdisc pfifo_fast 0: root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
Sent 4076809671 bytes 2935658 pkt (dropped 0, overlimits 0 requeues 3)
backlog 0b 0p requeues 3
--------------------------------

root@dd-wrt:~# tc -s qdisc show
qdisc pfifo_fast 0: dev eth0 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
Sent 2261778319 bytes 3827644 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc pfifo_fast 0: dev eth1 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
Sent 4076829713 bytes 2935700 pkt (dropped 0, overlimits 0 requeues 3)
backlog 0b 0p requeues 3
qdisc htb 1: dev vlan2 root refcnt 2 r2q 10 default 30 direct_packets_stat 0
Sent 2521566 bytes 8595 pkt (dropped 476, overlimits 872 requeues 0)
backlog 0b 0p requeues 0
qdisc htb 1: dev imq0 root refcnt 2 r2q 10 default 30 direct_packets_stat 0
Sent 10509573 bytes 9015 pkt (dropped 0, overlimits 8079 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 100: dev imq0 parent 1:100 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 10: dev imq0 parent 1:10 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 20: dev imq0 parent 1:20 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 30: dev imq0 parent 1:30 [Unknown qdisc, optlen=48]
Sent 444229 bytes 884 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 40: dev imq0 parent 1:40 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 211: dev imq0 parent 1:211 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 212: dev imq0 parent 1:212 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 213: dev imq0 parent 1:213 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 214: dev imq0 parent 1:214 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 215: dev imq0 parent 1:215 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 221: dev imq0 parent 1:221 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 222: dev imq0 parent 1:222 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 223: dev imq0 parent 1:223 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 224: dev imq0 parent 1:224 [Unknown qdisc, optlen=48]
Sent 10065344 bytes 8131 pkt (dropped 366, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 225: dev imq0 parent 1:225 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 231: dev imq0 parent 1:231 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 232: dev imq0 parent 1:232 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 233: dev imq0 parent 1:233 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 234: dev imq0 parent 1:234 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 235: dev imq0 parent 1:235 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc pfifo_fast 0: dev imq1 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0

I didn't copy the output of when I used just htb/sfq or hsfc/sfq but I did notice that they loaded properly but the problem still that my ingress wasn't properly being handle as I thought to be as it just hung around to 57mbps these test I performed were on a gigabyte laptop connected directly to the router, the router performed perfectly and is able to achieve the said bandwidth from the ISP as they give those extra download/upload bandwidth. I also did these tests on the stock and if performed well just the qos doesn't control download but It still performed as it should have to what the ISP is sending to their transparent emta telephony. I kinda looking for someone else to look into and post an output of their traffic output of a build in the broadcom k3x mega build if you or were having the same type of problem with qos. I'm going to do the same test on the k2.6 build today and post some of those results since they do no obviously don't have the codel/fq_codel built into them and knowing that shouldn't have any influence on the performance of qos in slightest. This is just something that has kinda been puzzling even though you may say it's a under powered soho and could say yes to that only that I'm not on a network that is demanding on anything other than just web browsing, some xbox/ps gaming, no torrents, no proxy, no vpn, nothing to kill a small routers performance just to enable Qos, and I had installed lede/openwrt before and used some those sqm scripts fq_codel/ simple.qos or cake/piece of cake with a positive results of course they don't have wifi but it was all for testing performance anyways. Thank you for reading this long post and I apologize if I placed this post into here as I was wanting to make aware of this issue and some results of type of testing with the hours that it took.
native_tx
DD-WRT User


Joined: 26 Feb 2014
Posts: 139
Location: Texas

PostPosted: Tue Nov 28, 2017 21:08    Post subject: Reply with quote
native_tx wrote:
I had tried the r33607 & r33772 mega builds for my E3200 and both loaded fine with no issues, no performance issues to the 2.4ghz but the only problem that always stands out is the Qos just enabling it takes 65% of the ingress bandwidth, the egress performance had no issues. I sat around most of the day troubleshooting on those two builds, reading from dd-wrt wiki on qos to see if there was something adding that I had already knew of but not much has changed, I used on different settings on either the netmask set to single ip or mac and used either the premium or express both performed ok, let say that I have a 100/10 connection after running several test i did a average and was 119/11. Placing around 80% of the ingress value in and ran ping test while speed testing the ingress was always at 57mbps/8mbps no matter what value I placed for the ingress it didn't move from 57, but once i did 10% of the 57Mbps then the ingress pings were lowering to a the 20ms no packet loss, ok now I decided to unplug and wait after each setting and ran the test all over again with same conclusion that showed a proper response from the same values that I placed to those results I did earlier
. Now I decided to do the same test again unplug and power up on different the codel and htb same results and with same conclusion until i did the same as before to receive a positive response and lower ms ping and same with hsfc and fq_codel same until I reproduced the again settings to lower the ms ping. The same with the previous build r33607 as the same method I did with r33772. I checked and noticed if I had issues with sirq and that worked up abit and could have made that happen during those tests but still I took a look at the traffic control of the same settings with fq_codel/codel with htb or hsfc and checked after powering down and then up, flashing or clearing nvram there seems to be a problem with an unknown qdisc involved that not loading.

# tc -s qdisc ls dev imq0
qdisc htb 1: root refcnt 2 r2q 10 default 30 direct_packets_stat 0
Sent 10275392 bytes 8608 pkt (dropped 0, overlimits 8079 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 100: parent 1:100 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 10: parent 1:10 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 20: parent 1:20 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 30: parent 1:30 [Unknown qdisc, optlen=48]
Sent 224140 bytes 542 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 40: parent 1:40 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 211: parent 1:211 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 212: parent 1:212 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 213: parent 1:213 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 214: parent 1:214 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 215: parent 1:215 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 221: parent 1:221 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 222: parent 1:222 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 223: parent 1:223 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 224: parent 1:224 [Unknown qdisc, optlen=48]
Sent 10051252 bytes 8066 pkt (dropped 366, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 225: parent 1:225 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 231: parent 1:231 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 232: parent 1:232 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 233: parent 1:233 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 234: parent 1:234 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 235: parent 1:235 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
---------------------------------

root@dd-wrt:~# tc -s qdisc ls dev eth0
qdisc pfifo_fast 0: root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
Sent 2261708145 bytes 3827251 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
--------------------------------

root@dd-wrt:~# tc -s qdisc ls dev eth1
qdisc pfifo_fast 0: root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
Sent 4076809671 bytes 2935658 pkt (dropped 0, overlimits 0 requeues 3)
backlog 0b 0p requeues 3
--------------------------------

root@dd-wrt:~# tc -s qdisc show
qdisc pfifo_fast 0: dev eth0 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
Sent 2261778319 bytes 3827644 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc pfifo_fast 0: dev eth1 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
Sent 4076829713 bytes 2935700 pkt (dropped 0, overlimits 0 requeues 3)
backlog 0b 0p requeues 3
qdisc htb 1: dev vlan2 root refcnt 2 r2q 10 default 30 direct_packets_stat 0
Sent 2521566 bytes 8595 pkt (dropped 476, overlimits 872 requeues 0)
backlog 0b 0p requeues 0
qdisc htb 1: dev imq0 root refcnt 2 r2q 10 default 30 direct_packets_stat 0
Sent 10509573 bytes 9015 pkt (dropped 0, overlimits 8079 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 100: dev imq0 parent 1:100 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 10: dev imq0 parent 1:10 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 20: dev imq0 parent 1:20 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 30: dev imq0 parent 1:30 [Unknown qdisc, optlen=48]
Sent 444229 bytes 884 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 40: dev imq0 parent 1:40 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 211: dev imq0 parent 1:211 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 212: dev imq0 parent 1:212 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 213: dev imq0 parent 1:213 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 214: dev imq0 parent 1:214 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 215: dev imq0 parent 1:215 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 221: dev imq0 parent 1:221 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 222: dev imq0 parent 1:222 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 223: dev imq0 parent 1:223 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 224: dev imq0 parent 1:224 [Unknown qdisc, optlen=48]
Sent 10065344 bytes 8131 pkt (dropped 366, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 225: dev imq0 parent 1:225 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 231: dev imq0 parent 1:231 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 232: dev imq0 parent 1:232 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 233: dev imq0 parent 1:233 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 234: dev imq0 parent 1:234 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 235: dev imq0 parent 1:235 [Unknown qdisc, optlen=48]
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc pfifo_fast 0: dev imq1 root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0

I didn't copy the output of when I used just htb/sfq or hsfc/sfq but I did notice that they loaded properly but the problem still that my ingress wasn't properly being handle as I thought to be as it just hung around to 57mbps these test I performed were on a gigabyte laptop connected directly to the router, the router performed perfectly and is able to achieve the said bandwidth from the ISP as they give those extra download/upload bandwidth. I also did these tests on the stock and if performed well just the qos doesn't control download but It still performed as it should have to what the ISP is sending to their transparent emta telephony. I kinda looking for someone else to look into and post an output of their traffic output of a build in the broadcom k3x mega build if you or were having the same type of problem with qos. I'm going to do the same test on the k2.6 build today and post some of those results since they do no obviously don't have the codel/fq_codel built into them and knowing that shouldn't have any influence on the performance of qos in slightest. This is just something that has kinda been puzzling even though you may say it's a under powered soho and could say yes to that only that I'm not on a network that is demanding on anything other than just web browsing, some xbox/ps gaming, no torrents, no proxy, no vpn, nothing to kill a small routers performance just to enable Qos, and I had installed lede/openwrt before and used some those sqm scripts fq_codel/ simple.qos or cake/piece of cake with a positive results of course they don't have wifi but it was all for testing performance anyways. Thank you for reading this long post and I apologize if I placed this post into here as I was wanting to make aware of this issue and some results of type of testing with the hours that it took.


I know there is a thread on a subject about the question and performance issue, with the overall conclusion is it can't handle that much bandwidth in that direction as opposed to egress but this is how it is, or since then changes happened that it won't work properly with older cpu models, not sure of but ok, but I had thought it could have been done none the less to see a better output of bandwidth using dd-wrt qos htb/fq_codel but they work hard as is but maybe have a look at the traffic control output they don't load properly when in use or enabled.
native_tx
DD-WRT User


Joined: 26 Feb 2014
Posts: 139
Location: Texas

PostPosted: Sun Dec 17, 2017 16:52    Post subject: dd-wrt.v24-34080_NEWD-2_K3.x_mega-e3200.bin Reply with quote
Yes is it normal for vpn modules to load and run when they are disabled in Gui? as I'm not using vpn for my network, I know that when using ssh can lead to some issues with performance, but there is an occurrences when after I setup and use https, when I'm using both ssh to allow the gui to enable the performance somehow to cause issues when running speed test, but when disabling the gui access and closing ssh the performance is restored. Qos still doesn't load correctly when i look at it through ssh using tc -s qdisc on both eth0 or imq0 with that being said qos can achieve a A on bufferbloat with A+ on both quality and speed, but in order to achieve that is to have 80% of ingress and 75% egress no priorities set for tcp, while setting up qos i see that when using ports for my ps3 for gaming will load but I don't see them related to the ps3 although they are there the ports and ps3 but the ps3 isn't listed in the destination, it has nothing in destination no ip or mac, as when I look at it through the iptables -t mangle -vnL, the ps3 is static and in the mac address portion of Qos were it's suppose to have priority. Wifi seems to be working as expected although throughput is something I'm experimenting with to find the right txpwr1 and placing number 4 in wl interference for bettering the signals has been proved better for my home not sure if the auto mode was doing as intended but seemed ok. My bandwidth has changed to a different provider as it's fiber again and not cable no docsis 3 connections but my router is able to handle my network, and the dd-wrt firmware i'm finding to optimize it more and more to fit my needs as we are all suppose to find out what works and what doesn't so reading the wiki's provided by dd-wrt helps a great deal but also needs to be updated to stay current to todays situations as some things have obvious changed in firmware that affects performance either positive or negatively.
steve2470
DD-WRT Novice


Joined: 04 Sep 2014
Posts: 8
Location: Orlando, FL, USA

PostPosted: Sat Dec 30, 2017 20:37    Post subject: got r34311 (big) running on my Asus RT-N16 Reply with quote
v3.0-r34311 big (12/29/17)

kinda proud that I got it to run after much work Smile



This is as expected Very Happy Wifi is working perfectly so far as well!

Here is the order of my builds:

1- https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2010/08-12-10-r14929/broadcom_K26/dd-wrt.v24-14929_NEWD-2_K2.6_mini_RT-N16.trx

2- ftp://ftp.dd-wrt.com/betas/2017/12-29-2017-r34311/broadcom/dd-wrt.v24_mini_asus.trx

3- ftp://ftp.dd-wrt.com/betas/2017/12-29-2017-r34311/broadcom_K3X/dd-wrt.v24-34311_NEWD-2_K3.x_mega_RT-N16.trx

4- https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2017/12-29-2017-r34311/broadcom_K3X/dd-wrt.v24-34311_NEWD-2_K3.x-big-RT-N16.trx

_________________
I have been interested in DD-WRT for years but still consider myself a newb.
Current configuration:
Asus RT-N16
v3.0-r36808 big (08/30/18 )
Linux 3.10.108 #17150
Broadcom BCM4716 chip rev. 1
dk55
DD-WRT Novice


Joined: 09 Dec 2017
Posts: 3

PostPosted: Fri Mar 02, 2018 1:49    Post subject: Re: Broadcom K3.X testing, test users wanted Reply with quote
Hi,
E2000 / BCM4716 chip rev 1.

I've moved to "DD-WRT v3.0-r35034 mega (02/17/18)" yesterday and I'm happy about move.
Previously installed "dd-wrt.v24-34578_NEWD-2_K3.x_mega-e2000" became very unstable.

In r34578 I encountered following problems:
- the device came to resetting itself spontaneously several times a day, sometimes just minutes after the previous time
- remote syslog (written on NAS) did not reveal source of the problem, but contributed to increased load of the device.
- Status>Router>Network>ActiveIPConnections opened new window but after listing first 50-80 entries httpd died/restarted every time I've tried. Web interface was unavailable for a while after each try. This was also encountered on r34111 and probably on r28647.
- CPU Temperature was often not available
- I have impression that mount.cifs did not work properly with NAS's shares (in r34111 worked ok, somehow in r34578 were broken)


With r35034 is seems that most of these problems are gone.
While I'm reluctant to test remote syslog again, current config works/did not reboot for over 24hrs.
Displays even 800 active connections without complaint. Temperature is displayed.
I'm yet to test mount.cifs.

Anyway, thanks for good work on this release. With r34578 I was already afraid my hardware was nearly dead.
moon_pie
DD-WRT Novice


Joined: 11 Aug 2017
Posts: 29
Location: edmonton, alberta, canadia!!

PostPosted: Sun May 06, 2018 15:51    Post subject: Reply with quote
AFAIK, the current (most recent?) known working build for the Asus RT-N66U as of this post is: DD-WRT v3.0-r35531 mega (03/26/18) from the broadcom k3.x folder. prior to that i had wifi issues on builds and had stuck with the 10/20/2017 build, i don't recall the exact number off hand.

perhaps this will save some flashing grief for others, broken wifi has been an issue in recent builds on this device, alas.

_________________
Primary Router for Residential 150Mbps/150Mbps Fiber:
*Asus RT-N66U: running DD-WRT v3.0-r37961 std (12/12/18)*
sampalazno
DD-WRT Novice


Joined: 09 Dec 2015
Posts: 10

PostPosted: Sat May 19, 2018 3:54    Post subject: v3.0-r35916 big (5/11/18) report Reply with quote
v3.0-r35916 big 5/11/18 flashed about 4 hours ago on my RT-N66U, no settings reset before or after, working fine so far.

Wifi w/1 physical & 1 virtual interface (2 SSIDs), simple VLAN setup, custom IPtables commands, 2 ethernet + 3 Wifi clients on a quiet SOHO network. Noisy Wifi environment (~25 neighbors SSIDs show up.)

Stable for +5 hours so far, will update this post in a few days & a few weeks.
gentoo
DD-WRT Novice


Joined: 18 Dec 2017
Posts: 1

PostPosted: Mon May 21, 2018 16:17    Post subject: Reply with quote
Could someone please tell me what's the difference between the builds https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2018/05-13-2018-r35927/broadcom_K3X/dd-wrt.v24-35927_NEWD-2_K3.x_mega-WNR3500Lv2.chk and https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2018/05-13-2018-r35927/netgear-wnr3500lv2/dd-wrt.v24-35927_NEWD-2_K3.x_mega-WNR3500Lv2.chk? The image from the broadcom_K3X folder does not boot whereas the second one works on my WNR3500Lv2.

Here is the boot log from the first image (non-working):
Code:
Loading: ........... 6697664 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 3.10.108-dd (root@linux) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6867-ce4d2fb5cc) ) #19152 Sun May 13 12:33:42 CEST 2018
CPU0 revision is: 00019749 (MIPS 74Kc)
Found a AMD NAND flash with 2048B pages or 128KB blocks; total size 128MB
Determined physical RAM map:
 memory: 07fff000 @ 00000000 (usable)
Zone ranges:
  Normal   [mem 0x00000000-0x07ffefff]
  HighMem  empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x07ffefff]
Primary instruction cache 32kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32511
Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/bin/sh
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 122920k/131068k available (4667k kernel code, 8148k reserved, 1613k data, 304k init, 0k highmem)
NR_IRQS:128
CPU: BCM5357 rev 2 at 480 MHz
bcm947xx_clockevent_set_mode: 1
bcm947xx_clockevent_set_mode: 3
console [ttyS0] enabled
Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Can't analyze schedule() prologue at 8000954c
bio: create slab <bio-0> at 0
PCI: no core
PCI: no core
PCI: scanning bus 0
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
PCI: Fixing up bus 0
Switching to clocksource MIPS
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 240
io scheduler noop registered (default)
HDLC line discipline maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a U6_16550A
brd: module loaded
pflash: found no supported devices
ERROR: Unknown flash, device_id:0x00
bcmsflash: found no supported devices
Creating 2 MTD partitions on "brcmnand":
0x000000500000-0x000002000000 : "linux"
0x000004000000-0x000007f00000 : "ddwrt"
Boot partition size = 524288(0x80000)
lookup_nflash_rootfs_offset: offset = 0x500000
found trx at 500000, len =8028160
scan filesys at 74F000
nflash: squash filesystem with lzma found at offset 500000
Creating 4 MTD partitions on "nflash":
0x000000000000-0x000000080000 : "cfe"
0x000000080000-0x000000200000 : "nvram"
0x000000500000-0x000002000000 : "nandimage"
0x00000074f000-0x000002000000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
add netgear boarddata for pflash if exists
add netgear boarddata for sflash if exists
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
et_module_init: passivemode set to 0x0
et_module_init: txworkq set to 0x0
et_module_init: et_txq_thresh set to 0xce4
et_module_init: et_rxlazy_timeout set to 0x3e8
et_module_init: et_rxlazy_framecnt set to 0x20
et_module_init: et_rxlazy_dyn_thresh set to 0
ET Corerev 3
eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.89.21 (r524987)
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
Broadcom Watchdog Timer: 0.07 initialized.
u32 classifier
    Performance counters on
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1920 buckets, 7680 max)
nf_conntrack_rtsp v0.7 loading
xt_time: kernel timezone is -0000
ip_set: protocol 6
gre: GRE over IPv4 demultiplexor driver
nf_nat_rtsp v0.7 loading
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: highspeed registered
TCP: hybla registered
TCP: htcp registered
TCP: vegas registered
TCP: veno registered
TCP: scalable registered
TCP: lp registered
TCP: yeah registered
TCP: illinois registered
NET: Registered protocol family 17
Bridge firewalling registered
8021q: 802.1Q VLAN Support v1.8
startup nvram driver
found nvram
max nvram space = 65536
List of all partitions:
1f00           27648 mtdblock0  (driver?)
1f01           64512 mtdblock1  (driver?)
1f02             512 mtdblock2  (driver?)
1f03            1536 mtdblock3  (driver?)
1f04           27648 mtdblock4  (driver?)
1f05           25284 mtdblock5  (driver?)
No filesystem could mount root, tried:  squashfs
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2)
Rebooting in 3 seconds..

It looks like the root partition specified in the kernel command line is wrong. The other image specifies a different root partition (1f05 instead of 1f02).

Here is the bootlog from the second image (working):
Code:
Loading: ....... 3904224 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 3.10.108-dd (root@linux) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6867-ce4d2fb5cc) ) #19136 Sun May 13 12:18:14 CEST 2018
CPU0 revision is: 00019749 (MIPS 74Kc)
Found a AMD NAND flash with 2048B pages or 128KB blocks; total size 128MB
Determined physical RAM map:
 memory: 07fff000 @ 00000000 (usable)
Zone ranges:
  Normal   [mem 0x00000000-0x07ffefff]
  HighMem  empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x07ffefff]
Primary instruction cache 32kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32511
Kernel command line: console=ttyS0,115200 root=1f05 rootfstype=squashfs noinitrd init=/bin/sh
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 125432k/131068k available (3064k kernel code, 5636k reserved, 486k data, 284k init, 0k highmem)
NR_IRQS:128
CPU: BCM5357 rev 2 at 480 MHz
bcm947xx_clockevent_set_mode: 1
bcm947xx_clockevent_set_mode: 3
console [ttyS0] enabled
Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Can't analyze schedule() prologue at 8000955c
bio: create slab <bio-0> at 0
PCI: no core
PCI: no core
PCI: scanning bus 0
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
PCI: Fixing up bus 0
Switching to clocksource MIPS
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 244
io scheduler noop registered (default)
HDLC line discipline maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a U6_16550A
brd: module loaded
pflash: found no supported devices
ERROR: Unknown flash, device_id:0x00
bcmsflash: found no supported devices
Creating 2 MTD partitions on "brcmnand":
0x000000500000-0x000002000000 : "linux"
0x000004000000-0x000007f00000 : "ddwrt"
Boot partition size = 524288(0x80000)
lookup_nflash_rootfs_offset: offset = 0x500000
found trx at 500000, len =24702976
scan filesys at 663000
nflash: squash filesystem with lzma found at offset 500000
Creating 4 MTD partitions on "nflash":
0x000000000000-0x000000080000 : "cfe"
0x000000080000-0x000000200000 : "nvram"
0x000000500000-0x000002000000 : "nandimage"
0x000000663000-0x000002000000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
add netgear boarddata for pflash if exists
add netgear boarddata for sflash if exists
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
Broadcom Watchdog Timer: 0.07 initialized.
GACT probability NOT on
Mirror/redirect action on
Failed to load ipt action
Simple TC action Loaded
netem: version 1.3
u32 classifier
    Performance counters on
    input device check on
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1959 buckets, 7836 max)
nf_conntrack_rtsp v0.7 loading
xt_time: kernel timezone is -0000
ip_set: protocol 6
gre: GRE over IPv4 demultiplexor driver
nf_nat_rtsp v0.7 loading
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: highspeed registered
TCP: hybla registered
TCP: htcp registered
TCP: vegas registered
TCP: veno registered
TCP: scalable registered
TCP: lp registered
TCP: yeah registered
TCP: illinois registered
NET: Registered protocol family 17
Bridge firewalling registered
8021q: 802.1Q VLAN Support v1.8
startup nvram driver
found nvram
max nvram space = 65536
VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
Freeing unused kernel memory: 284K
start service
starting Architecture code for broadcom
cannot open /dev/nvram
cannot open /dev/nvram
udevtrigger[732]: parse_config_file: can't open '/etc/udev/udev.conf' as config file: No such file or directory
boardnum 3500L
boardtype 0x052b
boardrev 02
nvram invalid, erase
Booting device: Netgear WNR3500L v2
get_wl_instance doesnt return the right value 0
eth1: No such device
et: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
et_module_init: passivemode set to 0x0
et_module_init: txworkq set to 0x0
et_module_init: et_txq_thresh set to 0xce4
et_module_init: et_rxlazy_timeout set to 0x3e8
et_module_init: et_rxlazy_framecnt set to 0x20
et_module_init: et_rxlazy_dyn_thresh set to 0
ET Corerev 3
eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.89.21 (r524987)
roboswitch: Probing device 'eth0'
roboswitch: trying a 53115! at eth0
roboswitch: found a 53115! at eth0
get_wl_instance doesnt return the right value 0
eth1: No such device
[USB] checking...
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:04.1: EHCI Host Controller
ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:04.1: irq 5, io mem 0x18004000
ehci-pci 0000:00:04.1: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:04.0: irq 5, io mem 0x18009000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new high-speed USB device number 2 using ehci-pci
SCSI subsystem initialized
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi0 : usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
/etc/preinit: line 44: can't create /proc/sys/net/ipv4/ip_conntrack_max: nonexistent directory
cannot open /proc/sys/net/ipv4/ip_conntrack_max
scsi 0:0:0:0: Direct-Access     Samsung  Mighty Drive     PMAP PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: [sda] 8059904 512-byte logical blocks: (4.12 GB/3.84 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
/etc/preinit: line 44: can't create /proc/sys/net/ipv4/ip_conntrack_max: nonexistent directory
cannot open /proc/sys/net/ipv4/ip_conntrack_max
device br0 entered promiscuous mode
br0: Invalid argument
device vlan1 entered promiscuous mode
device eth0 entered promiscuous mode
br0: Invalid argument
device eth1 is not a slave of br0
Interface delete failedbr0: port 1(vlan1) entered forwarding state


br0: port 1(vlan1) entered forwarding state
device br0 left promiscuous mode
device br0 entered promiscuous mode
ifconfig: ioctl 0x8914 failed: Address not available
device br0 left promiscuous mode
device vlan2 entered promiscuous mode
cp: can't stat '/tmp/mycron.d/*': No such file or directory
cp: can't stat '/jffs/mycron.d/*': No such file or directory
fast-classifier: starting up
fast-classifier: registered
Key is a ssh-rsa key
Wrote key to '/tmp/root/.ssh/ssh_host_rsa_key'
cp: can't stat '/mmc/mycron.d/*': No such file or directory
br0: port 1(vlan1) entered forwarding state
cat: can't open '/proc/sys/net/netfilter/nf_conntrack_flush': No such file or directory
device vlan2 left promiscuous mode
udhcpc: started, v1.28.3
udhcpc: sending discover
Duplicate configuration request

sh: missing ]
/opt/etc/init.d/rcS: No such file or directory
/jffs/etc/init.d/rcS: No such file or directory
/mmc/etc/init.d/rcS: No such file or directory
rmmod: eoip: No such file or directory
killall: proxywatchdog.sh: no process killed
/mnt/smbshare
umount: can't unmount /mnt/smbshare: No such file or directory
rmmod: cifs: No such file or directory
rmmod: fscache: No such file or directory
killall: schedulerb.sh: no process killed
killall: wdswatchdog.sh: no process killed
The Milkfish Router Services
ERROR: Necessary service setting not found: milkfish_username - aborting.
The Milkfish Router Services
Restoring SIP ddsubscriber database from NVRAM...
Empty.
The Milkfish Router Services
Restoring SIP ddaliases database from NVRAM...
Empty.
udhcpc: sending discover


By the way: I get no output when executing dnsmasq:
Code:
root@DD-WRT:~# dnsmasq --help
root@DD-WRT:~# dnsmasq -v
root@DD-WRT:~#

This looks like a bug to me.
Louis-Jean
DD-WRT Novice


Joined: 10 Dec 2015
Posts: 37

PostPosted: Thu May 31, 2018 5:52    Post subject: Reply with quote
Linksys E1200 rev. 2.0. Flashed with this build v3.0-r36006 mega 05/23/18 yesterday morning after doing a factory reset in build 29519. No problems detected so far after running it for ~28 hours. Internet seems faster too.

Last edited by Louis-Jean on Tue Jul 31, 2018 2:51; edited 3 times in total
Louis-Jean
DD-WRT Novice


Joined: 10 Dec 2015
Posts: 37

PostPosted: Thu Jun 07, 2018 7:01    Post subject: Reply with quote
I've been using this for over a week now. The only issue I noticed was that my Android phone's wifi connection sometimes stopped working. It didn't lose the connection but suddenly couldn't access websites. Disconnecting and reconnecting its wifi would temporarily fix it. That was fixed permanently by merely rebooting the phone, which was connected by wifi to the router at the time I upgraded the build which is probably what caused that problem. No other problems detected.

(Edit: the problem with the phone still happens after all. I'm blaming it more on the older version of Android on the phone, 5.0, and its older hardware/firmware than on this DD-WRT build though. My newer laptop is connected via wifi and has never had a problem at all so far. Maybe it's time to get a new phone (current one is a Samsung Galaxy S5 that's beginning to fall apart.) Meanwhile I'll just disconnect/reconnect wifi on it as needed.)
Goto page Previous  1, 2, 3 ... 54, 55, 56, 57, 58  Next Display posts from previous:    Page 55 of 58
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum