Author
Message
VSparxx DD-WRT User Joined: 12 Jan 2016 Posts: 99
Posted: Mon Oct 03, 2016 19:50 Post subject:
Muck1ng wrote: VSparxx wrote:
Man..wtf..you're asking about the firmware posted in the WA850RE thread in a thread discussing another model ?
Do you think somebody is going to do your homework ?
Ask in that thread, as everybody there are familiar with that model !
Am I missing something?
My model is TL-WA850RE(UK) Ver 1.21
This thread is titled TP-Link WA850RE
In fact every search for WA850RE comes back to this thread and to the very post i linked to?!?
My bad, I don't even remember when I have posted in this thread but I created a WA854RE thread and usually receive emails that people posted there, so without even getting too much into details I assumed you posted in that thread.
Anyways i'm sorry for my reply and can't help you with your problem sadly as I don't follow this thread.
Have a good evening .
Back to top
Sponsor
moccolo DD-WRT User Joined: 01 Feb 2016 Posts: 63
Posted: Thu Oct 06, 2016 17:43 Post subject:
hi, i found a Boot log from factorz firmware on another site from TL-WA850RE V.2.
can i post it here? dont want to breake some rules maybe
Back to top
moccolo DD-WRT User Joined: 01 Feb 2016 Posts: 63
Posted: Sun Oct 16, 2016 9:56 Post subject:
just to let everybody know.... on us tp-link site under 850re repeater, they added V.3 so we will have a new version soon...
Back to top
KrypteX DD-WRT Guru Joined: 18 Jan 2014 Posts: 2411
Back to top
moccolo DD-WRT User Joined: 01 Feb 2016 Posts: 63
Posted: Tue Oct 18, 2016 9:59 Post subject:
hi, today i tried to update dd-wrt with the leatest version for the 901nd v3 and i bricked my 850re V1.24.
so i opened it up (better say smashed the shell, its impossible to open it and i stabbed myself twice) and now i dont know the pin output for the serial connection.
does anyone know? pin 1 ---> tx, rx and gnd?
Back to top
KrypteX DD-WRT Guru Joined: 18 Jan 2014 Posts: 2411
Back to top
moccolo DD-WRT User Joined: 01 Feb 2016 Posts: 63
Posted: Tue Oct 18, 2016 12:41 Post subject:
thx, after playing with multimeter and soldering i got the serial working with putty and i got this.
Code: U-boot AP123
DRAM: 32 MB
id read 0x100000ff
Flash: 4 MB
Using default environment
In: serial
Out: serial
Err: serial
Net: ag934x_enet_initialize...
wasp reset mask:c03300
WASP ----> S27 PHY
GMAC: cfg1 0x5 cfg2 0x7114
eth0: xx:xx:xx:xx:xx:xx ---- deleted myself
s27 reg init
athrs27_phy_setup ATHR_PHY_CONTROL 4: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4: 0x10
eth0 up
WASP ----> S27 PHY
GMAC: cfg1 0xf cfg2 0x7214
eth1: xx:xx:xx:xx:xx:xx ---- deleted myself
s27 reg init lan
ATHRS27: resetting s27
ATHRS27: s27 reset done
athrs27_phy_setup ATHR_PHY_CONTROL 0: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 1: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 2: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2: 0x10
athrs27_phy_setup ATHR_PHY_CONTROL 3: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3: 0x10
eth1 up
eth0, eth1
Autobooting in 1 seconds
## Booting image at 9f020000 ...
Uncompressing Kernel Image ... Too big uncompressed streamLZMA ERROR 1 - must RESET board to recover▒▒H▒▒▒▒с1.1.4 (A
its in a bootloop...
im a noob in this... can i do the flash through putty or need tftp server? im on windows..
Back to top
moccolo DD-WRT User Joined: 01 Feb 2016 Posts: 63
Posted: Wed Oct 19, 2016 12:46 Post subject:
Ok i managed to flash everything back. repeater works. had problem with tftp server settings and firewall for utp69 but managed to do it... thanks
installed again dd-wrt on it,
should i try again a newer verson of ddwrt?
status says
DD-WRT
Router ModelTP-Link TL-WA901ND v3
Firmware Version DD-WRT v3.0-r28072 std (11/02/15)
i tried this when the flas went bad:
https://www.dd-wrt.com/site/support/other-downloads
this file tl-wa901ndv3-webflash.bin
or did i miss something?
Back to top
KrypteX DD-WRT Guru Joined: 18 Jan 2014 Posts: 2411
Back to top
moccolo DD-WRT User Joined: 01 Feb 2016 Posts: 63
Posted: Wed Oct 19, 2016 15:02 Post subject:
THX AGAIN..
Newer builds won't work or are just unstable?
Back to top
diversified DD-WRT Novice Joined: 02 Nov 2016 Posts: 1
Back to top
dogui DD-WRT Novice Joined: 29 Nov 2016 Posts: 1
Posted: Tue Nov 29, 2016 5:59 Post subject:
Just to say thank you, that's exactly what I needed for my WA850RE v1.2 to make it work in ethernet AP mode.
Great job!
I'm with dd-wrt a few years on the WR941ND but want to keep it as bridged repeater, it doesn't work as cabled AP, right?
Back to top
nickapos DD-WRT Novice Joined: 27 Nov 2016 Posts: 4
Posted: Mon Dec 05, 2016 18:27 Post subject:
dogui wrote: Just to say thank you, that's exactly what I needed for my WA850RE v1.2 to make it work in ethernet AP mode.
Great job!
I'm with dd-wrt a few years on the WR941ND but want to keep it as bridged repeater, it doesn't work as cabled AP, right?
Hey guys, has anyone managed to get dd-wrt working with WA850RE v2.0?
Thanks
Back to top
KrypteX DD-WRT Guru Joined: 18 Jan 2014 Posts: 2411
Back to top
nickapos DD-WRT Novice Joined: 27 Nov 2016 Posts: 4
Posted: Wed Dec 07, 2016 20:57 Post subject:
Thank you very much, it seems I am not very lucky...
Back to top