aleks3003 DD-WRT Novice
Joined: 24 May 2013 Posts: 3
|
Posted: Sat May 25, 2013 18:38 Post subject: burned wan port on tplink 1043 |
|
Hello everyone. Tell me who really could replace the broken VAN port on any of the LAN ports on the router TPLINK 1043. Already tried a lot of ways it does not work. Inet is heard from the provider through PPOE through swconfig got to raise the 'Net for 4 port switch, but an Internet nebilo, settings and all of the addresses from the ISP router received. After rebooting the router has received ip address lokalki provider and accordingly on vebmordu nezahodya, although I set up to receive ip addresses are not automatically and specifically pointed Andres ..
In general, it is difficult if not shall describe as a step zament burned VAN port to any of the LAN ports, and what better firmware for this router to deliver.
Thanks in advance. |
|