I am pretty sure that is all the information I posted above? I had already searched the forums for my model number and had no luck. I had gone to router detection and it was asking for chipset and ram information and that is what I posted above as well as FCC info and plenty more. Did I miss something else?
Here is the info again just in case.
FCC ID: A8JESR750H
Industry Canada ID: 10103A-ESR750H
Power: 12 VDC, 1.25 A
Connector type: Barrel plug
CPU1: Ralink RT3883
FLA1: 16 MB (Macronix MX25L12835)
RAM1: 256 MB (Samsung K4B1G1646G-BCH9 x 2)
Expansion IF types: USB 2.0
USB ports: 1
WI1 chip1: Ralink RT5392
WI1 802dot11 protocols: bgn
WI1 MIMO status: 2x2:2
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Ralink RT3883
WI2 802dot11 protocols: an
WI2 MIMO status: 3x3:3
WI2 antenna connector: U.FL
ETH chip1: Ralink RT3883
Switch: Atheros AR8327
LAN speed: 10/100/1000
LAN ports: 4
WAN ports: 1
I know it's a kind of half victory, but at least leave you with some hope.
It seems that your device it's a fairly new machine, so it will take some times till all the info are available.
According from what i am reading around (http://www.smallnetbuilder.com/wireless/wireless-reviews/31842-engenius-esr750h-xtrarange-dual-band-wireless-n-router-reviewed), it's based on the Ralink RT3883F and this is listed on many devices on which you can install Open WRT (http://wiki.openwrt.org/toh/start), so DD WRT then should be fine.
Try to send a private message to LOM, it's the same person which posted the interesting info on the previous link up here, plus he seems to be knowdgeable and even more importantly, elaborates in an intelligent manner his answers rather than tell you things as "read the guidelines".....and please if you find the right answer, post it here so everybody can benefit from it
Last edited by eoc2611p on Mon Feb 04, 2013 18:59; edited 1 time in total