Linksys WAP54G with Belkin FCC ID?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
Technoslick
DD-WRT Novice


Joined: 03 Jan 2013
Posts: 2

PostPosted: Thu Jan 03, 2013 16:26    Post subject: Linksys WAP54G with Belkin FCC ID? Reply with quote
Hi all, I have a Linksys WAP54G AP that I wanted to flash with DD-WRT. It's old, there is no hardware version listed at all. I wanted to cross reference its compatibility in the supported device list, but when looking at the FCC-ID, there are no matches at all under Linksys. The FCC ID is: QDS-BRCM1005, which to my surprise, matches under Belkin with totally different model numbers (F5D7130-4 and F5D7230-4).

I don't want to flash it until I verify which firmware I should be using but am surprised at the FCC-ID being associated with a totally different manufacturer AP.

Anyone have any suggestions?

Thanks,
Sponsor
rushwind
DD-WRT Novice


Joined: 04 Dec 2012
Posts: 48

PostPosted: Thu Jan 03, 2013 17:57    Post subject: Reply with quote
If you have the serial number, you can cross reference the hardware version at the following: http://wiki.openwrt.org/doku.php?id=oldwiki:openwrtdocs:hardware:linksys:wap54g
Technoslick
DD-WRT Novice


Joined: 03 Jan 2013
Posts: 2

PostPosted: Fri Jan 04, 2013 19:27    Post subject: Reply with quote
It's version 1.0. Thanks.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum