Malachi, that is a "feature" of Windows products. To change it you have to edit the registry and delete the keys for the wireless entries you don't want. You can do a google search for instructions...
Malachi, that is a "feature" of Windows products. To change it you have to edit the registry and delete the keys for the wireless entries you don't want. You can do a google search for instructions...
It works like a sputnik with openVPN and dd-wrt now!
Thanks a lot, Fractal, for the build.
I will put step-by-step guide with all the commands I executed when possible.
PD: Be aware of ftp transmission mode if you use it. I used default (text mode) one and corrupted files. You must use "type binary" command before transmitting.
It's easier with USB stick anyway.
I was just wondering, when flashing a new CFE like instructed by ryzhov_al, what stock builds of DD-WRT I am able to use on that router then... or is using Fractals builds the only possibilty to get it work then?
Thanks,
Sascha
Last edited by Sascha Zepter on Sun Oct 28, 2012 20:09; edited 1 time in total
Hey - first off, wanted to say thanks to the devs for finally making a 64k CFE / NVRAM DD-WRT build available. I followed the procedure to update my CFE to version 1.0.1.3 and successfully flashed Fractal's mega build from the link above.
Unfortunately, the LAN ports don't seem to work (LED is on, but can't access the web interface even with a static IP). Also, the reset button doesn't seem to work either. Is there an easy fix for these issues?
The Optware Oleg repo already has an iperf build, might be simpler for you to get it from there.
Code:
admin@RT-AC66U:/tmp/home/root# ipkg list | grep iperf
iperf - 2.0.4-1 - A tool for measuring TCP and UDP bandwidth performance.
I think I may have already mentioned on this thread that the binary does not work? It fires up and then just sits there. Same with a number of others binaries from them. Even my own compiled binaries that worked on previous routers don't work on this one. No error messages, just sits there and does nothing.
Hey - first off, wanted to say thanks to the devs for finally making a 64k CFE / NVRAM DD-WRT build available. I followed the procedure to update my CFE to version 1.0.1.3 and successfully flashed Fractal's mega build from the link above.
Unfortunately, the LAN ports don't seem to work (LED is on, but can't access the web interface even with a static IP). Also, the reset button doesn't seem to work either. Is there an easy fix for these issues?
Did you clear nvram values with wps button pressed while turning on?
The Optware Oleg repo already has an iperf build, might be simpler for you to get it from there.
Code:
admin@RT-AC66U:/tmp/home/root# ipkg list | grep iperf
iperf - 2.0.4-1 - A tool for measuring TCP and UDP bandwidth performance.
I think I may have already mentioned on this thread that the binary does not work? It fires up and then just sits there. Same with a number of others binaries from them. Even my own compiled binaries that worked on previous routers don't work on this one. No error messages, just sits there and does nothing.
Might be missing some depdencies. Try:
Code:
ldd iperf
See if it shows any missing library. (assuming DD-WRT ships with ldd)
Hey - first off, wanted to say thanks to the devs for finally making a 64k CFE / NVRAM DD-WRT build available. I followed the procedure to update my CFE to version 1.0.1.3 and successfully flashed Fractal's mega build from the link above.
Unfortunately, the LAN ports don't seem to work (LED is on, but can't access the web interface even with a static IP). Also, the reset button doesn't seem to work either. Is there an easy fix for these issues?
Did you clear nvram values with wps button pressed while turning on?
Well, that totally fixed it. Figures, the one thing I didn't try ...
Posted: Mon Oct 29, 2012 19:56 Post subject: Toolchain for 64k DDWRT Fractal builds
I have some test code I've compiled which uses serial(ftdi) and is currently seg faulting specifically on the open() function. The usb to serial port shows up correctly in DDWRT. Do I need to recompile against a new/different toolchain with this new 64k build?