Posted: Wed Dec 07, 2016 19:33 Post subject: Vpn working with Netflix?
Does any vpn working with netflix? there was a huge crackdown on VPN from Netflix and they blocked almost all VPN.
Still any VPN able to survive with it?
Can someone give me some thoughts on what i might be doing wrong? VPN **IS** working, as I have some Devices configured in Policy Based Routing and those work perfectly.
Many thanks to the OP for this thread which worked perfectly for me after hours trying and failing miserably to get policy based routing to work.
FWIW I had no idea what the "IP address of the configured VPN server you're establishing the tunnel to" was as IME most VPN only supply a web address. For my fellow networking noobs go into cmd and ping the provided server name which will look something like 'ping usa-miami-1.vpnprovider.com' and it will return the IP you need.
Joined: 04 Aug 2018 Posts: 1060 Location: Appalachian mountains, USA
Posted: Thu Dec 13, 2018 22:41 Post subject:
The four US NordVPN servers that have worked for me with Netflix for months all stopped working with Netflix this week. At present I know of no US NordVPN servers that work with Netflix. _________________ Five WRT1900ACSv2's on 42926, 44048.
VLANs, VAPs, NAS, client-mode travel router, OpenVPN client (AirVPN), DDNS, wireguard servers, wireguard clients (AzireVPN), two DNSCrypt DNS providers (incl Quad9) via OpenVPN/wireguard clients.
Since PBR is getting more popular these days due to streaming services issues, beware that there is a huge security hole in case Privoxy is used along with PBR.
Posted: Thu Feb 27, 2020 18:40 Post subject: no-pull not working
im trying to only send one specific ip/dns through vpn. when i add no-pull command it still sends all traffic through vpn. i tested adding a specific ip with net_gateway and that does work. how else can i tell it to send all ips through wan except the ones i want on vpn
Joined: 18 Nov 2015 Posts: 1517 Location: WCentral Indiana USA
Posted: Thu Feb 27, 2020 18:45 Post subject: Re: no-pull not working
isaac6300 wrote:
im trying to only send one specific ip/dns through vpn. when i add no-pull command it still sends all traffic through vpn. i tested adding a specific ip with net_gateway and that does work. how else can i tell it to send all ips through wan except the ones i want on vpn