[stiffy420]

Hi!

Im using a Netgear WNR3500 with DD-WRT (kong mod)

Im currently trying to get a bittorrent client up and running.

I managed to connect to the router using the software putty and connect to it using telnet. But i get stuckl when trying to make a folder "mkdir"

it doesnt work. nothing happens. what am i doing wrong?

first off, im trying to get optware installed, i get this far:


root@DD-WRT:~# mkdir /jffs/opt
root@DD-WRT:~# mount -o bind /jffs/opt /opt
root@DD-WRT:~# wget http://www.3iii.dk/linux/optware/optware-install-ddwrt.sh -O
- | tr -d '\r' > /tmp/optware-install.sh
Connecting to www.3iii.dk (193.202.110.52:80)
- 100% |*******************************| 2895 0:00:00 ETA
root@DD-WRT:~# sh /tmp/optware-install.sh
Checking system config ...
Using 81.170.200.1 as default gateway.
Using the following nameserver(s):
nameserver 192.168.1.1
Error: /opt partition not mounted.
for running Optware on JFFS (not recommended), Enter
mkdir /jffs/opt
mount -o bind /jffs/opt /opt
to correct this.
root@DD-WRT:~#

[stiffy420]

update:

i somehow installed optware and transmission. got it to work for a couple of minutes. logged in and try to sart a download. it stopped because it tried to download in a read only folder.

sonce then, i havent been able to reconnect to it.