Thanks for the info! That corrected the errors I was getting when trying to import to my Zabbix 4.4 instance.
Currently I have a Linksys wrt3200acm being monitored by an instance of Zabbix 4.4.8. I noticed that I was not getting any data for the "Network Traffic WAN" under graphs. Upon further investigation it was trying to pull information from port "ppp0". I replaced every instance of ppp0 with eth0 in the template and data is now populating on the graph. I am going to do some testing to ensure accuracy.
I am happy you were able to find this solution useful. Please post an updated template after you have done your testing, I was also not able to recieve any data for network trafficking and that may be the culprit. Thanks!
Hey textbuk, good idea. I have attached my 4.4 template. Here is what I have updated on mine. You should see WAN graphing, LAN graphing, I have also added some graphs for 2.4ghz bandwidth in and out, 5ghz band in and out. I have only tested on wrt3200acm.
This will also import into a Zabbix 5.0 LTS instance. However I don't think it will work if you modify it in 5.0 export it again and try and import into previous versions. There are some extra things in 5.0 that I am seeing that's not in previous versions such as "Screens". This is pure speculation however as I am still learning some 5.0 stuff, since my 4.4 instance went *POOF*.
Edit: Forgot to add. I modified the Incoming and Outgoing traffic items, units bps from Bps, and added custom multiplier of 8 to each so that I could get values in bits per second instead of Bytes per second. Also I modified "Network Traffic WLAN" to "Network Traffic LAN" because eth1 that its graphing is actually the LAN. LAN/WLAN might be more accurate, but I haven't had a chance to circle back around and address it. Feel free to PM me if you like and we can discuss further if you want.
Last edited by SparkStormrider on Thu May 28, 2020 19:11; edited 2 times in total
If you are happy with it please file a "bug" report in the bug tracker otherwise it will not get updated:
I wouldn't say 100% happy with it yet as there are some things that aren't quite working yet that I am trying to see if it's my router, or if its the template with incorrect values. Once I determine everything is working as I would like, I'd like to try working with another router to ensure that it'll work with it. It's possible there are different parameters for different routers?