I'm also hoping for an update. Since r19519 my wireless throughput is much better than before. Bun i have random diconnects in icq clients (Miranda etc.). This wasn't before i flashes the actual build.
I tested many options (TCP timeout etc.) but it still continues disconnecting. That's getting hardly on my nerves.
It's impossible to save changes for 3G Wan settings.
Only Auto 3G/2G is possible (which is default).
If I change to "Force 3G" and save or Apply, nothing changes.
Posted: Tue Aug 28, 2012 11:45 Post subject: Re: [NEW BUILD] 07-20-12 r19519
I've forgot to mention that dd-wrt on SX763 is in general working very well and I am very happy with BrainSlayer's work.
Because all I see is that people complain.
It's impossible to save changes for 3G Wan settings.
Only Auto 3G/2G is possible (which is default).
If I change to "Force 3G" and save or Apply, nothing changes.
I know I have only started using this version for.. 2 hours now..
i have a TPLINK - 1043ND v1.8 upgraded it right from the 14929 (old i know) after doing reset to defaults beforehand.
only problem i had, was password issue, and a minor choke of the router accessing its menus, after another reset, everything seems to work, and compared to 14929 wifi now transfers as much data as i send without killing the router and needing a power pull restart.
wifi channel in status displays 'unknown' like many reports, i do not want to mess with that since the wifi finally works! i assume maybe it has to do with the advanced settings of wifi, will check it maybe in a month or so (gotta transfer some stuff now )
good luck guys! and thanks for yet a really good build (at least as far as i can tell)
wifi channel in status displays 'unknown' like many reports, i do not want to mess with that since the wifi finally works!
I have the same status issue ('unkown'). In older firmwares it was showing the right channel.
For curiosity - are you using the "NG Mixed" mode with 20MHz channels or using any of the Dynamic/Turbo with 40MHz channels?
My router locks randomly with the 40MHz channels activated - usually it happens when my laptop with N WiFi is accessing the router connected at 300Mbps.
On TP-Link TL-MR3420 I found:
- on Wireless Advanced Setting Tab, there is possibility to chose Antena chain 1+2+3 (this hardware has only 2 ext. antennas)
- wifi channel is shown as unknown
- 3G (Huawei E3131) work very good! BUT INTERNAL SD MEMORY DOESN'T WORK!
- there is no explanation what is "time" stands for in general setting > 3G (WAN) setting under force reconnect.
Is it time interval (ex. every 59 minutes) or specified hour of day (00:59 AM?)?
Everything else work cool on MR3420 _________________ TL-WR1043ND v1.8 (OpenWRT AA 12.09 + OpenVPN) AP
TL-WA730RE (svn20675) offline
TL-WA730RE (svn20675) offline
TL-WR1043ND v1.8 (OpenWRT AA 12.09 + OpenVPN) AP
TL-MR3420 v1.2 (OpenWRT AA 12.09, OpenVPN client, samba3.6-srv, usb, 3g) + Huawei E3131s-2 (HSPA+)
Major crash again today, had to 30/30/30 the router and set it all back up again
This was a 100% clean install of this build too
update: 7/9/12
Frozen router when I got home today (7th) 2 days after a full reset because of a fatal crash, had to reboot to fix this time _________________ TPLINK TL-WR2543ND (5GHz)
WRT160NL (2.4GHz)
- .ipup scripts for ppp not working (in MR3420 script can be placed only in /tmp/ect/config)
- no usb_storage implemented, but dmesg shows SD card attached and it's volume size - some of usb_storage module files are present in firmware, alse in USB www tab can check "mount automatic storage"
- router sometimes restarts after 3G disconnection
- after changing wifi mode from mixed to ng-mixed - changes also some settings in advanced settings. _________________ TL-WR1043ND v1.8 (OpenWRT AA 12.09 + OpenVPN) AP
TL-WA730RE (svn20675) offline
TL-WA730RE (svn20675) offline
TL-WR1043ND v1.8 (OpenWRT AA 12.09 + OpenVPN) AP
TL-MR3420 v1.2 (OpenWRT AA 12.09, OpenVPN client, samba3.6-srv, usb, 3g) + Huawei E3131s-2 (HSPA+)
Something is getting worse for me with this build, after my initial 100% clean flash using PuTTY and Serial pins it was solid for weeks, then I got a bad crash and had to reset it,
Now it is crashing every day, maybe the FW got corrupted during one of the crashes, but it will not stay stable for over a day any more, even after a 30/30/30 _________________ TPLINK TL-WR2543ND (5GHz)
WRT160NL (2.4GHz)
Something is getting worse for me with this build, after my initial 100% clean flash using PuTTY and Serial pins it was solid for weeks, then I got a bad crash and had to reset it,
Now it is crashing every day, maybe the FW got corrupted during one of the crashes, but it will not stay stable for over a day any more, even after a 30/30/30