Posted: Fri Jul 13, 2012 1:08 Post subject: Serial Recovery F7D3302 V1
After having a long healthy relationship with the Old Linksys Routers I had moved up to a Belkin F7D3302 for the USB option. One of my Units is up and running with DD-WRT and doing quite well BUT my other unit flashed perfect but when I restored a Settings Config file things got messy. No Ping and no light. I figured the Unit couldn't have died so I searched though your forums and bought the DKU-5 cable and setup my connection. Attached is the message that constantly scrolls. It's stuck, in a loop whatever. Ctrl-C will not break this condition UNLESS... I was wondering if the setup using Putty was correct with regards to echoing Ctrl-C. Should I see the command in the Terminal Window? Is there any other way to get to the CFE prompt?
Joined: 24 Oct 2008 Posts: 1037 Location: Latin America
Posted: Sat Jul 14, 2012 16:27 Post subject:
Maybe you are not passing the Ctrl+C, but it may be the cable as well, or maybe you are not connecting it right.
Have you tested the cable by a simple loop?
Did you measure the voltage in the router to check which pad is TxD and RxD?
Or perhaps the problem is beyond recover... _________________ If you want support, please read first the announcements and forum rules.
Si usted desea ayuda, por favor lea primero los anuncios y las reglas del foro.
