Things i've done:
Increased the time-out towards my server.
Added a sleep between the wget and untar of mypage.
Mypage tar will not be removed from /opt to verify it's there
I have ran 3 consecutive clean install without a problem.
Joined: 06 Feb 2010 Posts: 7401 Location: Little Rock
Posted: Sat Jun 30, 2012 16:55 Post subject:
ok, i will begin testing it in one moment, i formatted my drive and will start anew today, one thing i did notice though from yesterday tests was that the install didn't install nearly any of the packages, most times i make a 300MB partition for the optware install - and it uses around 210 - 220MB when it finishes, yesterday it only had 142MB used when the install finished and i rebooted the unit. So something was for sure not working correctly.
I will post back when results are finished, i am also going to log the terminal to see exactly what may be happening better, i would do it to the router /tmp/install_log but thing with that is if the terminal freezes and then timeout, it doesn't produce the log. _________________ Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ
Joined: 06 Feb 2010 Posts: 7401 Location: Little Rock
Posted: Sat Jun 30, 2012 19:42 Post subject:
It is ok, i am glad to have tried to help debug this, but i do not understand why this is happening either. Well if you need me to continue to help trying to test this, let me know. till then i am hooking my wzr-hp-ag300h back up. _________________ Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ
It works fine on my two E3000s. I have ran the OTRW installation several times with your script. OTRW was already installed, so they are not completely new installations using your script. _________________ 2 times APU2 Opnsense 21.1 with Sensei
2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)
3 times Asus RT-N16 shelved
E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)
3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)