OTRW2 (incl. Mypage)

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3 ... 62, 63, 64  Next
Author Message
basmaf
DD-WRT Guru


Joined: 24 Feb 2011
Posts: 1074

PostPosted: Tue Jun 19, 2012 18:52    Post subject: OTRW2 (incl. Mypage) Reply with quote
Hi,

This is an updated version of Optware The Right Way created by Frater.

Most scripts are the same but with fixes for changes in DD-WRT.
OTRW2 includes MyPage with BWmon and NAT QOS

OTRW WIKI

The development version is for testing new features and new style prep_optware script.

Mypage is a service script and will take care of all settings and symlinks which are needed to get it working.

OTRW2 can be installed over a existing OTRW installation.
I DO advise a clean install.

Please don't forget the original author of OTRW Frater
He wrote all the original functions and scripts.


Thanks to wabe jumran barryware and buddee for testing.

basmaf..

Donation possible


######################################

Builds other the supported builds below will NOT work!!!!
This is because FPU emulator has been removed from DD-WRT Kernel.
This is a required feature to have optware working.
If the install script shows you are using a not supported build load one from the list of supported builds.

Supported Build from:
    *Kong K2.6
    *Kong AC builds are NOT supported
    *Fractal 14929-20006
    *BS 14929-19519


Installation scripts: (REBOOT after installation or upgrade!!)
Code:
# Install script
wget -O /tmp/prep_optware http://dd-ware.googlecode.com/svn/otrw2/prep_optware
sh /tmp/prep_optware


Last edited by basmaf on Fri Oct 17, 2014 20:01; edited 22 times in total
Sponsor
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Tue Jun 19, 2012 19:27    Post subject: Reply with quote
you did a nice job integrating everything.. Back in the day, once I got otrw running (needed Fraters help with asiablock), I spent hours getting mypage & bwmon running as an add-on. Especially bwmon.

Installing your script(s) was just running the prep script, and everything just worked Smile

kudo's x 2

_________________
[Moderator Deleted] Shocked


Last edited by barryware on Wed Jun 20, 2012 0:37; edited 1 time in total
jack_90125
DD-WRT Novice


Joined: 13 Apr 2011
Posts: 21

PostPosted: Tue Jun 19, 2012 23:21    Post subject: Reply with quote
wow really slick!
thank you for your work.
worked first time which is more than I can say when I did it before.
Dark_Shadow
DD-WRT Guru


Joined: 31 Aug 2009
Posts: 2448
Location: Third Rock from the Sun

PostPosted: Wed Jun 20, 2012 3:22    Post subject: Reply with quote
Still just for K2.4?
_________________
Peacock Thread-FAQ -- dd-wrt Wiki

Testing Multiple Routers -- Bootloader Collection Project -- My Wiki
jumran
DD-WRT User


Joined: 31 Jul 2009
Posts: 492
Location: Toronto, ON, CA

PostPosted: Wed Jun 20, 2012 3:34    Post subject: Reply with quote
Dark_Shadow wrote:
Still just for K2.4?


No, works on kernel 2.4 and 2.6.

_________________
Asus RT-N16 [Build King Kong 18050M NEWD-2 K2.6 + Optware + My Page] Mr. Green
buddee
DD-WRT Guru


Joined: 06 Feb 2010
Posts: 7401
Location: Little Rock

PostPosted: Wed Jun 20, 2012 3:46    Post subject: Reply with quote
Yes, and if you are using a k2.4 newd build, i don't suggest 18024, as i stated in the test thread, it doesn't automount the correct partition. I tested it on 14929 newd usb generic and it worked fine, as i type now i am trying it on 15943 - with a freshly partitioned 2gig usb thumb drive, which so far, looks to be installing just fine.

I am not sure which k2.4 newd builds are affected by the automount problem, and looking in trac didn't really provide much help, as i see that a ticket was filed by redhawk concerning the automount problem around 17348 - 17364 (even using the same unit i am using - wl-520gu), but it was closed as 'fixed' and being that 18024 is past 17xxx, i don't really consider that as 'fixed', i am however going to do more reading on trac to see what changes happened in between the builds that could have possibly caused the problem.

_________________
Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ

Having problems with port forwarding? Check out Port Forward Troubleshooting for more info.
basmaf
DD-WRT Guru


Joined: 24 Feb 2011
Posts: 1074

PostPosted: Wed Jun 20, 2012 7:31    Post subject: Reply with quote
Could be that i haven't been clear enough.
This works on K24 & K26 routers.

Please provide feedback when using the script.
I'm always searching for improvements.

Also looking for someone with skills to modify the layout of mypage.
The sub menu needs to be shrunk so i can fit in mypage 14 Mr. Green
Nat Activity / QOS

basmaf
buddee
DD-WRT Guru


Joined: 06 Feb 2010
Posts: 7401
Location: Little Rock

PostPosted: Wed Jun 20, 2012 13:01    Post subject: Reply with quote
Yes, it works on both k2.4 and k2.6.

basmaf - curious question, which i won't be able to answer till tonight because i had to end my testing during the day, i did a re-install on my wl-520gu using 15943 mini-usb last night, install seemed to go fine, but now, mypage is not in the status anymore, do i need to set the flags on mypage to executable?

i don't recall having to do that on my previous tests and i can't see if they are already set till tonight, when i can re-connect my 520gu..

_________________
Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ

Having problems with port forwarding? Check out Port Forward Troubleshooting for more info.
basmaf
DD-WRT Guru


Joined: 24 Feb 2011
Posts: 1074

PostPosted: Wed Jun 20, 2012 13:41    Post subject: Reply with quote
Script handles file permission and executable flags and nvram mypage_scripts
They are set every time mypage starts.

Mypage will not start after the prep script is ran.
It needs a reboot or a manual start.
A manual can give missing file related errors, due to bwmon.
Can't double check that right now someone is installing right now...
Something i have to get used to before i reboot Wink

When mypage doesn't show up in status tab, nvram value is not set.
buddee
DD-WRT Guru


Joined: 06 Feb 2010
Posts: 7401
Location: Little Rock

PostPosted: Wed Jun 20, 2012 15:51    Post subject: Reply with quote
Gotcha, i didn't figure i had to set anything, as on 14929 newd usb generic, i didn't have to, it just worked right after install/reboot. But even after install script ran (which ran fine, no errors), and i rebooted, it didn't show up, the services are there though, when i ssh into the shell and type 'service' it lists mypage in the green. I will test again tonight to see if i can figure out whats going on with it.
_________________
Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ

Having problems with port forwarding? Check out Port Forward Troubleshooting for more info.
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Wed Jun 20, 2012 15:53    Post subject: Reply with quote
buddee wrote:
Gotcha, i didn't figure i had to set anything, as on 14929 newd usb generic, i didn't have to, it just worked right after install/reboot. But even after install script ran (which ran fine, no errors), and i rebooted, it didn't show up, the services are there though, when i ssh into the shell and type 'service' it lists mypage in the green. I will test again tonight to see if i can figure out whats going on with it.

clear your browsers cache Razz

_________________
[Moderator Deleted] Shocked
buddee
DD-WRT Guru


Joined: 06 Feb 2010
Posts: 7401
Location: Little Rock

PostPosted: Wed Jun 20, 2012 15:54    Post subject: Reply with quote
barryware wrote:
buddee wrote:
Gotcha, i didn't figure i had to set anything, as on 14929 newd usb generic, i didn't have to, it just worked right after install/reboot. But even after install script ran (which ran fine, no errors), and i rebooted, it didn't show up, the services are there though, when i ssh into the shell and type 'service' it lists mypage in the green. I will test again tonight to see if i can figure out whats going on with it.

clear your browsers cache Razz


Don't have to, i set it to auto do that on close long ago Wink

_________________
Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ

Having problems with port forwarding? Check out Port Forward Troubleshooting for more info.
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Wed Jun 20, 2012 16:26    Post subject: Reply with quote
buddee wrote:
barryware wrote:
buddee wrote:
Gotcha, i didn't figure i had to set anything, as on 14929 newd usb generic, i didn't have to, it just worked right after install/reboot. But even after install script ran (which ran fine, no errors), and i rebooted, it didn't show up, the services are there though, when i ssh into the shell and type 'service' it lists mypage in the green. I will test again tonight to see if i can figure out whats going on with it.

clear your browsers cache Razz


Don't have to, i set it to auto do that on close long ago Wink


I wuz kid'en.. a little dd-wrt humor. Smile

_________________
[Moderator Deleted] Shocked
buddee
DD-WRT Guru


Joined: 06 Feb 2010
Posts: 7401
Location: Little Rock

PostPosted: Wed Jun 20, 2012 16:45    Post subject: Reply with quote
Indeed, its all good man. Cool
_________________
Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ

Having problems with port forwarding? Check out Port Forward Troubleshooting for more info.
basmaf
DD-WRT Guru


Joined: 24 Feb 2011
Posts: 1074

PostPosted: Wed Jun 20, 2012 17:47    Post subject: Reply with quote
Clear cache.. read that a couple of times before.
believe it was on this forum Wink
Goto page 1, 2, 3 ... 62, 63, 64  Next Display posts from previous:    Page 1 of 64
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum