Cisco Valet M20 - Unable to get 40MHz Channel Width

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
ZellDincht
DD-WRT Novice


Joined: 24 Sep 2007
Posts: 22

PostPosted: Tue Aug 21, 2012 21:39    Post subject: Cisco Valet M20 - Unable to get 40MHz Channel Width Reply with quote
Hey guys,

I am running K26 Build 19519 mini on my Cisco Valet M20 v1. It advertises itself as a 300Mbps router, but I am only able to get 130Mbps max. I have placed it into 40MHz mode, but InSSIDer is showing that the router is not doing channel bonding as it supposed to. DD-WRT will say that it is doing channel bonding (e.g. 6+4), but it seems that it is not.

Does anyone know how to fix this problem? Do I have a defective router? I have it in N-only mode, so no B or G devices should be on my network. I have a new wireless printer that is also connected to it, so if it were a G printer then it would not connect, right?
Sponsor
kuerious
DD-WRT Novice


Joined: 15 Feb 2011
Posts: 4

PostPosted: Mon Oct 15, 2012 17:25    Post subject: Bump Reply with quote
I thought I was the only one having this problem. I know there are those who(m) know something to help out here. I'll continue searching, but....anyone? Bueller?
slobodan
DD-WRT Guru


Joined: 03 Nov 2011
Posts: 1555
Location: Zwolle

PostPosted: Wed Oct 17, 2012 15:39    Post subject: Reply with quote
You should play a little with channel width and such, pressing Save instead of Apply, then playing some more until you get the proper setting.
_________________
2 times APU2 Opnsense 21.1 with Sensei

2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)

3 times Asus RT-N16 shelved

E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)

3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)


Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum